Investigation of Exotic Structure of the Largely Deformed Nucleus ^23A1 in the Relativistic-Mean-Field Model

A candidate for proton halo nucleus ^23A1 is investigated based on the constrained calculations in the framework of the de[ormed relativistic mean tield (RMF) model with the NL075 parameter set. It is shown by the constrained calculations that the ground state of ^23A1 has a large deformation that corresponds to the prolate shape. With that large deformation, the non-constrained RMF calculation predicts that there appears an inversion between the 2s1/2 [211] and ld5/2 [202] shells. The valence proton of ^23A] is weakly bound and occupies 2s1/2 [211] and ld5/2 [202] with the weights of 56% and 29%, respectively. The calculated RMS radius for matter is in agreement with the experimental one. It is also predicted that the difference between the proton RMS radius and the neutron one is very large, This suggests that there exists a proton hMo in ^23Al.     

1,3-双(1-苯基-1H-四唑-5-巯基)-乙酰苯腙钳形受体对卤素阴离子的识别机理

采用密度泛函B3LYP(Becke, three-parameter, Lee-Yang-Parr)和HF(Hatree-Fock)方法, 从理论上探讨了1,3-双(1-苯基-1H-四唑-5-巯基)-乙酰苯腙(DAPHZ)钳形受体对卤素阴离子的识别机理,结果发现DAPHZ受体以其钳形结构中的-N-H基团与卤素阴离子间形成双侧红移氢键进行识别. 经BSSE校正后DAPHZ•••F-, DAPHZ•••Cl-和DAPHZ•••Br-体系的分子识别相互作用能ΔECP分别为-327.5,-163.5和-148.3 kJmol-1, 说明钳形DAPHZ受体对F-具有最好的识别能力. 此外, 采用自然键轨道(NBO)计算, 相关H原子化学位移计算及分子中原子(AIM)等理论分析了识别体系中红移氢键的电子结构和性质, 结果表明APHZ受体对卤素阴离子的识别能力的相对顺序为DAPHZ•••F- >> DAPHZ•••Cl- ≈ DAPHZ•••Br-.     

降温速率对Ag-SmBCO单畴生长中自发成核的影响

在前期的研究中曾通过Ag掺杂降低Sm123/Sm211体系熔点,利用Nd123冷籽晶技术成功制备出具有理想织构的SmBCO/Ag单畴块材.但在实验结果中发现相比于未掺杂坯体,掺入Ag后的SmBCO坯体生长速率下降,在所考察的慢冷温区里,生长速率呈不断减小趋势,最终因自发成核而无法继续生长,使得SmBCO单畴区域局限于15×15mm2范围内.为了抑制单畴生长中的自发成核现象,本文研究了降温速率对SmBCO/Ag单畴自发成核的影响.在两组不同条件下的降温速率实验中发现,不同的降温速率对体系自发成核的抑制效果是不同的.利用降低降温速率,成功地将掺Ag SmBCO单畴面积从15×15mm2增大至26×26mm2.     

A Two-Dimensional Photonic Crystal Slab Mirror with Silicon on Insulator for Wavelength 1.3μm

A concrete two-dimensional photonic crystal slab with triangular lattice used as a mirror for the light at wavelength 1.3μm with a silicon-on-insulator （SOI） substrate is designed by the three-dimensional plane wave expansion method. For TE-like modes, the bandgap in the Г-K direction is from 1087nm to 1559nm. The central wavelength in the bandgap is about 1.3μm, hence the incident light at wavelength 1.3μm will be strongly reflected. Experimentally, such a photonic crystal slab is fabricated on an SOI substrate by the combination of EBL and ICP etching. The measurement of its transmission characteristics shows the bandgap edge in a longer wavelength is about 1540 nm. The little discrepancy between the experimental data and the theoretical values is mainly due to the size discrepancy of the fabricated air holes.     

Magnetic properties of misch-metal partially substituted Nd–Fe–B magnets sintered by dual alloy method

The misch-metal(MM) partially substituted Nd–Fe–B sintered magnets were fabricated by the dual alloy method,and the crystal structure, microstructure, and magnetic properties were analyzed comprehensively. X-ray diffraction(XRD)reveals that the increasing content of the MM has an inconsiderable effect on the crystallographic alignment of the magnets.Grains of the two main phases are uniformly distributed, and slightly deteriorate on the grain boundary. Due to the diffusion between the adjacent grains, the MM substituted Nd–Fe–B magnets contain three types of components with different Ce/La concentrations. Moreover, the first-order reversal curve(FORC) diagram is introduced to analyze the magnetization reversal process, coercivity mechanism, and distribution of reversal field in magnetic samples. The analysis indicates that there are two major reversal components, corresponding to the two different main phases. The domain nucleation and growth are determined to be the leading mechanism in controlling the magnetization reversal processes of the magnets sintered by the dual alloy method.     

金属表面荧光增强的物理增强机制

具有特殊形貌及构型的表面(如金属薄膜)能够使位于其邻近的荧光分子的荧光信号得到增强, 这种现象被称之为表面增强荧光(Surface Enhanced Fluorescence, SEF)。有关表面增强荧光效应的研究探讨已有许多报道,并先后提出了多种增强机理以试图理解和解释观测到的实验现象。本文将在总结归纳已有机理研究的基础上,从物理学的角度出发分析理解局域场增强、能量转移以及辐射衰减速率增加等理论模型,并对衬底表面与荧光分子之间的间距变化对增强效果的影响进行探讨。     

Average Property of Isospin Effects Induced by Neutron-Halo Nuclei

We study the average property of the isospin effects of reaction mechanism induced by neutron-halo nuclei within the isospin-dependent quantum molecular dynamics model. We find that the extended neutron density distribution for the neutron-halo projectile brings an important isospin effect into the reaction mechanism, which induces the decrease of nuclear stopping R; however, it induces the obvious increases of the neutron-proton ratio of nucleon emissions （n/p）nucl for all of the beam energies in this work, compared to the same mass stable colliding system.     

Observation of β-Relaxation in Sub-Tg Isothermally Annealed Al-Based Metallic Glasses

Al85Ni5 Y8Ca2 and Al88Ni5 Y6Co2Fe2 metallic glasses are fabricated by melt spinning. A kink or a small exothermic peak is observed for both the samples isothermally annealed at sub-glass transition temperatures. Temperature modulated differential scanning calorimetry （TMDSC） data disapprove amorphous phase separation. The activation energies derived from Kissinger plots of the exothermic process on DSC curve around glass transition temperature are consistent with those of β-relaxation of metallic glasses.     

基于内乘波概念的TBCC进气道过渡模态研究

TBCC(涡轮基组合循环)在过渡模态的工作,是这种新型高速动力系统的关键问题。本文针对基于内乘波概念的内并联式TBCC进气道进行了其过渡模态流场的研究。首先,应用本团队自主提出的内乘波式进气道设计概念,提出一种新型TBCC进气道设计方案。然后,验证了其在设计马赫数4.0下实现全流量捕获,在模态转换时,分流板的分流是有效的。针对其在过渡模态马赫数2.5的性能,通过基于数值模拟的设计参数分析,发现在内参考收缩比为3.11时进气道流通面积合适可实现自起动、且综合性能较优。研究还发现,分流板偏转角度范围越小,分流段流动越好、通流出口总压恢复系数也越高。