面向复杂求解域的高效粒子网格/蒙特卡罗模型与阳极层离子源仿真

等离子体仿真是研究等离子体放电特性的重要手段,特别是阳极层离子源,其放电结构的几何特性对等离子体特性的作用很难通过实验手段进行系统研究.然而,传统仿真模型一般是针对离子源进行整体建模,离子源的阴阳极几何轮廓形成的复杂求解域,导致模型的计算效率和收敛性较差.鉴于此,将离子源结构仿真与等离子体仿真分离,首先利用磁镜原理将离子源内外阴极大小、形状和相对位置等一系列阴极几何参数简化为磁镜比R_m和磁镜中心磁感应强度B₀两个磁镜参数,并在此基础上,建立了高效粒子网格/蒙特卡罗模型,将收敛时间由1.00μs缩短到0.45μs,大幅提升了计算效率和稳定性.进一步利用该模型系统研究了阳极层离子源放电结构的几何特性对等离子体特性的影响规律,发现R_m=2.50, B₀=36 mT时磁镜对等离子体约束效果最佳,当放电中心的位置与内外阴极间磁镜中心重合时,不仅能够输出高密度离子束流,同时可大幅减少阴极刻蚀,并保证内外阴极的刻蚀平衡.     

不同生境半夏及炮制半夏中鸟嘌呤核苷的含量测定

采用反相高效液相色谱法测定不同生境半夏和炮制半夏中鸟嘌呤核苷的含量.不同生境的半夏中鸟嘌呤核苷的含量并无差异,但炮制半夏中鸟嘌呤核苷含量较生品均有不同幅度下降.从水溶性成分鸟嘌呤核苷的含量看,种植半夏质量并不比野生半夏质量差;半夏在炮制过程中水溶性成分有所损失.     

3种药物分子的1H和13C NMR谱线全指定

应用1D和2D NMR技术,对3种药物分子：比卡鲁胺(Bicalutamide)、马来酸罗格列酮(Rosiglitazone Maleate)、氯吡格雷硫酸盐(Clopidogrel Hydrogensulfate)的¹H和¹³C NMR的谱峰进行了准确归属.     

Hg掺杂对BaPb1-xBixO3超导体中Pb和O的化学环境的影响

采用XPS方法对BaPb1-xBixO3超导体以及Hg掺杂BaPb1-xBixO3超导体进行了对照研究,结果表明当Hg取代Pb后,位于18eV和22eV的价带的强度发生变化并与样品的超导转变温度相关联,O1s和Pb4f谱峰也随Hg掺入而发生位移,说明随Hg的掺入BaPb1-xBixO3超导体的化学环境发生改变.     

La1-x／2Pr1-x／2SrxCuO4的电输运性质和超导电性

La1-x/2Pr1-x/2SrxCuOy(LPSCO)多晶样品采用传统的固相反应法制备.X射线衍射表明:LPSCO具有典型的空穴搀杂的T-214相的结构.磁化率测量显示:Sr搀杂在0.05≤x≤0.30范围内具有超导转变;Tc随x的增大呈抛物线形式变化,且在x=0.18时达到最大值28K.电阻的测量显示:随搀杂量的增大,系统呈现从绝缘到半导体,最后到金属的导电行为的变化;在欠掺杂区,正常态电阻温度关系符合ρ(T)=ρ0 αT-ClnT;而在过掺杂区,对数项消失.本文从替代所引起的晶体结构和载流子特性变化解释了Sr掺杂样品的电输运行为和超导特性.     

Generation of 2.1 W Continuous Wave Blue Light by Intracavity Doubling of a Diode-End-Pumped Nd：YAG Laser in a 30 mm LBO

A folded four-mirror cavity with a composite Nd：YAG rod is optimized to obtain high efficient cw 473nm blue output. The laser could operate stably in the region of the thermal-lens focal length from 20mm to 70mm. LBO is used for intracavity frequency doubling of the 946nm transition of Nd：YAG and the optimum LBO length is investigated. A maximum output power of 2.1 Win the blue spectral range at 473nm is achieved with 30-mm-long LBO, corresponding to an optical conversion efficiency of 9.1%.     

Modulation Frequency Multiplexed Tunable Diode Laser Spectroscopy System for Simultaneous CO, CO2 Measurements

A modulation frequency multiplexed dual diode-laser system is developed for simultaneous detection of the two most common fire gas products CO and CO2. Simultaneous detection is achieved by modulating each laser at different frequencies, demodulating the signal by a pair of lock-in amplifiers for each gas. Laser beams are combined and detected by one detector after passing through an identical optical path. The experimental results show little performance degradation associated with modulation frequency multiplexing, and no cross-talk between the two multiplexed detection channels is measured.     

Experimental demonstration of underwater optical wireless power transfer using a laser diode

We experimentally demonstrate an underwater optical wireless power transfer(OWPT) using a laser diode(LD)as a power transmitter. We investigate the characteristics of a solar cell and a photodiode(PD) as a power receiver. We optimize the LD, the PD, and the solar cell to achieve the maximum transfer efficiency. The maximum transfer efficiency of the back-to-back OWPT is measured as 4.3% with the PD receiver. Subsequently, we demonstrate the OWPT in tap and sea water. Our result shows an attenuation of 3 dB/m in sea water.     

Geometrical optics-based ray field tracing method for complex source beam applications

Due to the fact that traditional ray field tracking approaches require a large number of geometrical optical(GO) ray tubes,they are very inefficient in many practical applications.An improved ray model scheme for a complex source beam(CSB) tracking technique is proposed in this paper.The source field can be expressed by a superposition of CSBs,then every CSB basis function has a Gaussian-type amplitude distribution and is suitable for replacing a GO ray tube in the ray tracing approach.The complex phase matching technique is adopted to find the reflected beam in the reflection point where local approximation is used to represent the curved surface in its neighborhood.A new solution to multiple reflections using the conventional right-handed reflected system is used to track the field easily.Numerical results show the accuracy of the proposed method.     

Two-dimensional electron gas characteristics of InP-based high electron mobility transistor terahertz detector

The samples of In_xGa_(1-x)As/In_(0.52)Al_(0.48)As two-dimensional electron gas(2DEG)are grown by molecular beam epitaxy(MBE).In the sample preparation process,the In content and spacer layer thickness are changed and two kinds of methods,i.e.,contrast body doping andδ-doping are used.The samples are analyzed by the Hall measurements at 300 Kand 77 K.The In_xGa_(1-x)As/In_(0.52)Al_(0.48)As 2DEG channel structures with mobilities as high as 10289 cm~2/V·s(300 K)and42040 cm~2/V·s(77 K)are obtained,and the values of carrier concentration(Nc)are 3.465×10~(12)/cm~2and 2.502×10~(12)/cm~2,respectively.The THz response rates of In P-based high electron mobility transistor(HEMT)structures with different gate lengths at 300 K and 77 K temperatures are calculated based on the shallow water wave instability theory.The results provide a reference for the research and preparation of In P-based HEMT THz detectors.