制备方法对Al2O3掺杂Pt/WO3-ZrO2催化剂上正庚烷异构化反应的影响

采用恒pH法和非恒pH法制备了Al₂O₃掺杂的Pt/WO₃/ZrO₂催化剂,并用N₂吸附-脱附、X射线衍射、紫外-可见漫反射、CO化学吸附、X射线光电子能谱、²⁷Al魔角旋转核磁共振和吡啶吸附红外等技术对催化剂进行了表征.结果表明,相比于非恒pH法制备的催化剂,恒pH法制备的催化剂具有较高的比表面积和Pt分散度,在H₂气氛中产生更多的B酸位,从而表现出更高的催化正庚烷临氢异构化反应活性; 在200℃和质量空速0.9h^-1的反应条件下,正庚烷转化率达70.0%,明显高于非恒pH法制备的催化剂(43.5%).     

超声波辅助木质素磺酸钠烷基化合成表面活性剂

以木质素磺酸钠(LS)和1-溴十二烷为原料,吡啶为催化剂,在碱性醇水混合溶液中,利用超声波辅助烷基化反应制备生物基表面活性剂.通过GPC,UV,FTIR和1H-NMR对木质素磺酸钠及其直接烷基化产物(ALS)、超声烷基化产物(UALS)进行结构表征,结果表明超声活化使木质素磺酸钠的分子量从154200下降到106000,酚羟基的含量从0.65%提高到1.55%,活化效率达139%.1H-NMR谱中甲氧基的峰面积占总面积的比值由超声前的36.0%下降到超声后的21.0%.烷基化反应位点是LS的酚羟基,超声波活化烷基化效率明显高于直接烷基化效率.1%质量浓度的UALS的表面张力为28.2 mN/m,相同质量浓度的ALS和LS的表面张力分别为34.1 mN/m和41.5 mN/m.UALS的临界胶束浓度(CMC)是5×10-2g/L,比LS的低近两个数量级.超声烷基化效果较直接烷基化好的原因在于超声波处理一方面提高了酚羟基的含量,一方面破坏了大分子的三维网状结构,强化了体系的传质和传热效率.     

锂离子电池片状四氧化三钴负极的合成及改性

采用液相沉淀法结合低温固相热解法合成了锂离子电池片状Co3O4负极.通过X射线粉体衍射(XRD)、Brunauer-Emmett-Teller(BET)比表面积分析、扫描电子显微镜(SEM)及恒电流充放电等表征手段,发现该Co3O4为立方相,结晶完整且无杂质,由直径为1.5-3.0μm、厚度约为100-300 nm的不规则片状颗粒组成,比表面积约为30.5 m2·g-1;其比容量高且容量保持率好,在0.1C倍率下,首次放电容量高达1444.5 mAh·g-1,50次循环后充电容量仍大于1100.0 mAh·g-1;但在高倍率(1C)下,50次循环后充电容量保持率仅为75.3%,倍率性能一般.故采用碳纳米管(CNTs)掺杂改性,结果表明:在1C倍率下,70次循环后复合材料充电容量保持率为96.3%;在2C倍率下,50次循环后充电容量保持率仍高达97.0%,倍率性能显著提升.     

Study of the electric capacitance spectra on symmetric quantum-dot pattern

We have calculated the ground-state energy of the symmetric quantum-dot pattern by the ab initio calculation method, i.e. unrestricted Hartree-Fock-Roothaan (UHFR) method based on the Gaussian basis, and studied their electric capacitance spectra, assuming each quantum dot of quantum-dot pattern to be confined in a three-dimensional spherical potential well of finite depth. For the systems in question, our results show that our method and theoretical model not only give the electric capacitance peaks similar to s-shell and p-shell atom-like quantum dot, but also show some new fine-structure of electric capacitance in the symmetric quantum-dot pattern system. This method might be a feasible tool to study few-electron problems on the symmetric quantum-dot pattern system.     

双离子(40Ar+, C2H+6)辐照合成金刚石纳米晶颗粒

用双离子(⁴⁰Ar⁺，C₂H⁺₆)辐照实验完成了从多壁碳纳米管向金刚石纳米晶颗粒的转变.对转变机理进行了初步探讨.这一探索有望能成为一种金刚石纳米晶合成的新途径.由此可知，多重荷能离子辐照用于其他材料纳米结构的制备也不是凭空设想. 关键词： 金刚石纳米晶 离子辐照 透射电子显微镜     

Contrast Adaptation Decreases Complexity in Retinal Ganglion Cell Spike Train

The difference in temporal structures of retinal ganglion cell spike trains between spontaneous activity and firing activity after contrast adaptation is investigated. The Lempel-Ziv complexity analysis reveals that the complexity of the neural spike train decreases after contrast adaptation. This implies that the behaviour of the neuron becomes ordered, which may carry relevant information about the external stimulus. Thus, during the neuron activity after contrast adaptation, external information could be encoded in forms of some certain patterns in the temporal structure of spike train that is significantly different, compared to that of the spike train during spontaneous activity, although the firing rates in spontaneous activity and firing activity after contrast adaptation are sometime similar.     

Experimental Study on Electrostatic with Two Guiding of Supersonic D20 Molecular Beam Charged Wires

We demonstrate the guiding of a supersonic heavy-water （D2O） molecular beam using a hollow electrostatic field generated by the combination of two parallel charged-wires and two grounded metal-plates, and report some new and preliminary experimental results. In the experiment, we detect the guiding signals by using the method of time-of-flight mass spectrum and study the dependence of the relative transmission of the beam guide on the guiding voltage. Our study shows that the relative transmission of the beam guide is increased linearly with increasing guiding voltage Vguid, and the number of the guided D20 molecules is at least increased by 89.4% when the guiding voltage is ＋20.0k V. Finally, some potential applications of our guiding scheme in the molecule optics are briefly discussed.     

双离子(40Ar+,C2H6+)辐照合成金刚石纳米晶颗粒

用双离子(40Ar+,C1H6+)辐照实验完成了从多壁碳纳米管向金刚石纳米晶颗粒的转变.对转变机理进行了初步探讨.这一探索有望能成为一种金刚石纳米晶合成的新途径.由此可知,多重荷能离子辐照用于其他材料纳米结构的制备也不是凭空设想.     

[Cu~ⅡEDTA]~(2-)与[Fe~Ⅱ(CN)_6]~(4-)反应产物的分子光谱研究

按1:1(摩尔比)混合[Cu EDTA]~(2-)和[Fe(CN)_6]~(4-)溶液(pH=8)时,得到一种深红棕色溶液。测定并讨论了此红棕色溶液的电予光谱和红外光谱,据此确定此溶液中生成了不太稳定的氰桥配合物——[EDTA Cu~Ⅱ—NC—Fe~Ⅱ(CN)_5]~(6-)。     

格雷码与六步相移编码融合的三维结构光学测量方法

编码结构光技术是一种获取复杂目标三维结构的典型测量技术,其将编码后的结构光图案投射到待测物体表面进行调制、采集,并通过解码计算三维面形数据,可见编码方法是结构光三维测量技术的核心问题。然而,通用的格雷码编码方法和六步相移编码方法都存在一定缺陷,为此,以获取物体的高精度三维点云数据为目标,提出了一种融合格雷码与六步相移的结构光技术。首先,将格雷码结构光设计为7幅黑白相间的条纹周期图像,并通过投射角度解码操作将图像划分为多个区域;然后,设计六步相移结构光为6幅具有相位差的余弦周期图像,通过相位解包裹操作将每个子区域细分到单个像素单元;最后,融合以上两种编码结构光解码值,计算图像内每个空间点的绝对相位信息。仿真实验与实际测试实验显示,与传统六幅莫尔条纹结构光技术相比,融合结构光技术计算量较小,同时也克服了单独使用格雷码或相移技术所存在的问题,能够以较高精度获取物体目标的三维结构细节,为基于结构光的双目三维扫描系统提供一定理论依据。