Determination of molybdenum, chromium and aluminium in human urine by electrothermal atomic absorption spectrometry using fast-programme methodology

Rapid and direct procedures for the determination of molybdenum, chromium and aluminium in human urine samples are developed. Fast-programme methodology is used to simplify the heating cycles. Hydrogen peroxide, nitric acid and Triton X-100 are added to the urine samples which are directly introduced into the furnace. For molybdenum, two successive injection steps are required due to the low level of this element in the samples analyzed. Calibration is carried out using aqueous standards for aluminium and the standard additions method for both molybdenum and chromium. The reliability of the procedures is checked by analyzing two certified reference materials.     

Creatinine biosensor based on ammonium ion selective electrode and its application in flow-injection analysis

A new, highly sensitive, fast responding and stable potentiometric biosensor for creatinine determination is developed. The biosensor is based on an ammonium ion-selective electrode. Creatinine deiminase (EC 3.5.4.21) is chemically immobilized on the surface of the polymeric ion-sensitive membrane in the form of monomolecular layer using a simple, one-step carbodiimide covalent attachment method. The resulting enzyme electrodes are useful for measurement under flow injection analysis (FIA) conditions. The biosensors exhibit excellent operational and storage stability. The enzyme electrodes retain over 70% of initial sensitivity after ten weeks of work under FIA conditions. The storage stability at 4 °C is longer than half a year without loss of sensitivity. Under optimized conditions near 30 samples per hour can be analyzed and the determination range (0.02-20.0 mmol l⁻¹) fully covers creatinine concentrations important from clinical and biomedical point of view. The simple biosensor/FIA system has been successfully used for determination of creatinine in urine, serum and posthemodialysate samples.     

Enzyme catalysis in organic solvents: a promising field for optical biosensing

The ability of enzymes to work in non-aqueous media offers new and almost unexploited possibilities for the development of new optical biosensors. The advantages of performing biocatalytic reactions in non-aqueous media are discussed in relation to their possible application in optical biosensor design. Attention is focused on the factors that influence enzymatic catalysis in organic solvents, including the role of enzyme-associated water, criteria for solvent selection and the alteration of enzyme specificity. Recent examples of relevant applications and future prospects of organic-phase optical biosensing are discussed.     

Preliminary characterization of anhydrous ethanol used in Brazil as automotive fuel

This work reports preliminary studies on the characterisation of anhydrous ethanol (AEA) used as an automotive fuel mixed with gasoline in Porto Alegre (South Brazil). Pre-concentration of the impurities contained in 1000 ml of AEA was carried on through solid-phase extraction using XAD4 resin. The main compounds in the extract were identified by means of spectral data from the library of the equipment. The concentrate was then fractionated using a preparative liquid chromatographic column filled with activated silica gel and the elution procedure was carried out with, n-hexane, n-hexane-benzene (1:1, v/v) and dichloromethane. Prior to analysis by GC-MS, each fraction was reduced to 1 ml with a gentle stream of nitrogen. Saturated linear hydrocarbons and aromatic hydrocarbons eluted in the first fraction and oxygenated compounds such as aldehydes. ketones and alcohols, eluted in the second one. were the main compounds detected in the sample.     

Spectrofluorimetric analysis of cefoxitin in pharmaceutical dosage

A fluorescence method involving sample pre-treatment is investigated concerning the determination of cefoxitin. A fluorescent product is formed when samples containing cefoxitin are subjected to alkaline hydrolysis with 1.0M sodium hydroxide and heated for 60 min at 90 degrees . The fluorescence is measured in ethanol/water medium (50% v/v) at approximately pH 2.0 provided by adding of 0.1M hydrochloric acid. The fluorescence excitation and emission maxima were 317 and 400 nm, respectively. The quantitative range is between 0.020 and 1.40 mug/ml. A detection limit of 2 x 10(-3) mug/ml was found. The proposed method has been applied to the determination of cefoxitin in commercial injections, saline and glucosed physiological serum.     

Comparative voltammetric study of 2,4-dinitrophenol (DNP), albumin and DNP-albumin as an analytical approach to the use of DNP as a universal label in immunoelectrochemical assays

A comparative electrochemical study of 2,4-dinitrophenol (DNP), albumin and DNP-albumin has been carried out at a hanging mercury drop electrode, in order to use DNP as a universal label in immunoelectrical assays. Several electrochemical techniques have been used. Differential pulse voltammetry has proved to be the most suitable. Wide dynamic linear ranges (more than three orders of magnitude for DNP-albumin) and low detection limits have been achieved (5 x 10(-10)M, 2 x 10(-10)M, 3 x 10(-12)M for DNP, albumin and DNP-albumin, respectively). Good reproducibility has been obtained in all cases (R.S.D. < 2.2%).