无催化纳米氧化锌的制备及其光学性质研究

本文采用无催化剂直接蒸发高纯Zn粉,在800℃氧气氛条件下,在Si(111)衬底上生长得到以四角状为主的纳米ZnO(T-ZnO)。T-ZnO纳米线每个角约互成110°,长度约为1.5μm,直径100nm左右;Raman分析表明E2(H)普遍存在于各形态的ZnO;光致发光光谱表明,T-ZnO纳米线的光致发光除了与材料性质有关,还与杂质缺陷有关,蓝绿光带是ZnO的缺陷产生的。     

铝粉点火微观机理的光谱研究

 铝粉是一种含能高的材料,它被广泛地添加到含能材料中。利用3台单色谱仪和OMA谱仪等多种谱仪技术,研究了铝粉在几种不同环境下的快速反应微观特性。研究表明：铝粉冲击波点火的临界条件和铝粉的物理状态相关。微米铝粉点火的临界温度为2 100 K,它接近Al₂O₃的熔化温度。它表明,在空气中容易氧化的微米铝粉点火,必须使铝粉表面的氧化层熔化。在气相反应中,微米铝粉和氧的反应是主要的;和水的反应是次要的。减小微米铝粉的颗粒尺寸,可以明显提高快速反应温度。 含铝复合燃料中的液体燃料反应后的铝粉才能参与反应;铝粉添加至气相反应介质后将明显提高反应温度。     

最有效的相容剂是两嵌段还是多嵌段聚合物？

采用Monte Carlo模拟方法研究了多嵌段聚合物在A／B／嵌段聚合物三组份体系作为相容剂使用的有效性．占总体积19％的A组份在体系中为分散相．模拟结果显示了两嵌段和多嵌段聚合物在界面上的聚集行为,以及如何影响这个不相容体系的相形为．两嵌段聚合物趋于直立在相界面上,而多嵌段聚合物更容易横跨在相界面上并占据较大的界面积．从而导致多嵌段聚合物更有效的阻止体系相分离的发生．     

Global Chaos Synchronization between Two New Different Chaotic Systems via Active Control

We present chaos synchronization between two new different chaotic systems by using active control. The proposed controller ensures that the states of the controlled chaotic response system asymptotically synchronizes the states of the drive system. Numerical simulations are shown to verify the result.     

Simulation of Helium Behaviour in Titanium Crystals Using Molecular Dynamics

The behaviour of helium in Ti crystals at 300 K has been investigated by means of the molecular dynamics. The study is focused on the influences of He-Ti interaction on the aggregation of helium atoms in the substrate. When a Born-Mayer potential is used to describe the He-Ti interaction, the He atoms are unable to cluster with each other due to the weak bridge barrier that cannot trap the helium atoms, Whereas using a He-Ti potential that is constructed by fitting the ab initio pairwise He-Ti potential, the clustering of He atoms can be observed. The results indicate that suitable He-Ti potential plays an important role in the formation of He clusters in metals. Moreover, it is noted that the shape of the formed He cluster is irregular, and the produced defect prefers to congregating on one side of the He cluster rather than spreading symmetrically around it.     

Block Entanglement in the Single-Hole Hubbard Model

We investigate the distribution of the entanglement of the one-dimensional single-hole Hubbard model （HM） and study the relationship between the entanglement and quantum phase transition in the model. The von Neumann entropy of a block with neighbouring spins L for a single-hole HM is calculated using the densitymatrix renormalization group. The distributions of the entanglement entropy in the ground state, as a function of block length, show a dramatic effect, i.e. effectively decoupling with the centres, no matter how the Coulomb interaction u 〉0 or u 〈0. Contrarily, for the Coulomb interaction u = 0 or close to zero, the entanglement entropy in the single-hole model reaches a saturation value for a certain block size. For a fixed size L = 40, the ground state entanglement entropy measure, as a function of u1 shows a peak corresponding to the critical quantum phase transition.     

Effect of Alumina and Chromium Interlayers on Microstructures and Optical Properties of Thin Ag Films on Glass Substrates

Effects of alumina and chromium interlayers on the microstructure and optical properties of thin Ag films are investigated by using spectrophotometry, x-ray diffraction and AFM. The characteristics of Ag films in Ag/glass, Ag/l2O3/glass and Ag/Cr/glass stacks are analysed. The results indicate that the insertion of an Al2O3 or Cr layer decreases the grains and influences the reflectance of Ag films. The reflectance of the Ag film can be increased by controlling the thickness of alumina interlayer. The stability of Ag films is improved and the adhesion of Ag films on glass substrates is enhanced by alumina as an interlayer.     

条件非线性最优扰动方法在陆面过程模式参数优化中的扩展应用初探

本文旨在探讨条件非线性最优扰动(CNOP)方法在陆面过程模式的参数优化工作方面的扩展应用.使用通用陆面模式(CoLM)和CEOP地面基准站——吉林通榆站退化草地2006年生长季的资料,针对土壤颜色、砂土比例和叶面积指数等关键模式参数,使用感热通量、潜热通量和浅层土壤温湿度作为检测变量,设计了单参数和多参数优化试验.结果表明,CONP扩展方法得到的优化参数提高了CoLM对检测变量的模拟能力,并且多参数的优化结果明显优于单参数的优化结果,在模式模拟偏差较大的土壤湿度方面改进尤为显著,此外,使用了差异进化算法( 关键词： 条件非线性最优扰动(CNOP) 陆面过程模式 参数优化     

飞秒激光低压N2等离子体特性的实验研究

在低于一个标准大气压的条件下对飞秒激光产生的N₂等离子体光谱进行了实验研究.结果表明, 各种样品气压下的激光N₂等离子体光谱均表现为连续谱和线状谱的叠加.随着样品气压的降低, 连续谱和原子谱线的强度经历了由缓慢增强发展为缓慢降低再到迅速降低的过程, 而正一价离子谱线强度呈现逐步增强的特征.在气压低于0.3 atm (1 atm=101325 Pa)时, 出现了正二价态的离子谱线. 给出了低压N₂等离子体对于飞秒激光传输和能量吸收的物理特性, 并初步讨论了低压等离子体通道特性.这些结果有助于加深了解飞秒激光等离子体的特性和机理, 特别是给出了在实验上测量不同价态离子光谱的条件, 为今后的研究提供了有益的实验依据. 关键词： 飞秒激光 气压 等离子体光谱 激光传输     

基于太赫兹光谱的固体片剂孔隙率研究

内部孔隙影响着药片的崩解特性,进而影响药效的发挥,但目前鲜有关于药片孔隙率有效检测手段的报道。基于太赫兹脉冲的飞行时间测量原理,利用太赫兹时域光谱技术研究了微晶纤维素和吲哚美辛混合片剂的孔隙率与折射率、吲哚美辛质量分数之间的定量关系;建立了三者关系的数学计算模型,通过实际测试固体样品片剂的太赫兹时域光谱,计算了片剂的孔隙率、折射率。结果表明:片剂的孔隙率与折射率、不同成分质量分数间存在线性关系,与建立的数学计算模型相符。利用太赫兹光谱法测得的孔隙率与采用气体置换法测量的孔隙率的平均相对误差为6.0%,与采用密度法计算的孔隙率的平均相对误差为8.9%,表明利用太赫兹光谱法测量片剂孔隙率具有可行性,能够成为药物片剂质量监测的补充手段。