Effect of Poly（Ether Urethane） Introduction on the Performance of Polymer Electrolyte for All-Solid-State Dye-Sensitized Solar Cells

The introduction of poly（ether urethane） （PEUR） into polymer electrolyte based on poly（ethylene oxide）, LiI and I2, has significantly increased the ionic conductivity by nearly two orders of magnitudes. An increment of I3- diffusion coefficient is also observed. All-solid-state dye-sensitized solar cells are constructed using the polymer electrolytes. It was found that PEUR incorporation has a beneficial effect on the enhancement of open circuit voltage VOC by shifting the band edge of TiO2 to a negative value. Scanning
electron microscope images indicate the perfect interfacial contact between the TiO2 electrode and the blend electrolyte.     

A Base-Emitter Self-Aligned Multi-Finger Sil-xGex/Si Power Heterojunction Bipolar Transistor

With a crystal orientation dependent on the etch rate of Si in KOH-based solution, a base-emitter self-Migned large-area multi-finger configuration power SiGe heterojunction bipolar transistor （HBT） device （with an emitter area of about 880μm^2） is fabricated with 2μm double-mesa technology. The maximum dc current gain is 226.1. The collector-emitter junction breakdown voltage BVcEo is 10 V and the collector-base junction breakdown voltage BVcBo is 16 V with collector doping concentration of 1 × 10^17 cm^-3 and thickness of 400nm. The device exhibited a maximum oscillation frequency fmax of 35.5 GHz and a cut-off frequency fT of 24.9 GHz at a dc bias point of Ic = 70 mA and the voltage between collector and emitter is VCE = 3 V. Load pull measurements in class-A operation of the SiGe HBT are performed at 1.9 GHz with input power ranging from OdBm to 21 dBm. A maximum output power of 29.9dBm （about 977mW） is obtained at an input power of 18.SdBm with a gain of 11.47dB. Compared to a non-self-aligned SiGe HBT with the same heterostructure and process, fmax and fT are improved by about 83.9% and 38.3%, respectively.     

Synthesis of hexagonal monocrystal AlN microtubes and nanowires at low temperature

This paper reports that pure hexagonal aluminium nitride microtubes and nanowires growing along the [0001] direction have been successfully synthesized by directly reacting AlClh-AlN, microtubes, nanowires,h-AlN, microtubes, nanowiresProject supported by the National Natural Science Foundation of China (Grant No 10474078) and the Science Foundation of the Education Office of Shanxi Province, China.2006-11-23This paper reports that pure hexagonal aluminium nitride microtubes and nanowires growing along the [0001] direction have been successfully synthesized by directly reacting AlCl3 with NaN3 at low temperature （450℃） under condition of non-solvent system. The grey-white powder of reacting product was characterized by high-resolution transmission electron microscope （HRTEM）, which shows that the powder is long straight-wire morphology with outer diameter from 40nm to 300 nm and length up to several micrometres. The results of both electron diffraction （ED） and x-ray diffraction （XRD） indicate that the AlN microtubes have a pure hexagonal monocrystal tubular structure with the combination of the curled AlN nanobelts. Room-temperature photoluminescence spectrum of the synthesized sample showed an emission peak, which is closely related to the small size of the microtubes.     

几种二阶矩模型模拟湍流旋流燃烧的比较

本文对几种二阶矩湍流反应模型,包括统一二阶矩模型、只考虑温度脉动的二阶矩模型、只考虑浓度脉动关联的二阶矩模型、及同时考虑温度脉动和浓度脉动关联的二阶矩模型,进行了比较。将上述模型加入到FLUENT6.0软件平台上,模拟了不同旋流数下甲烷-空气的旋流燃烧。模拟结果和实验结果进行了比较,探讨了各关联量大小及其对时平均反应率的影响。结果表明,统一二阶矩湍流反应模型具有最好的模拟效果。其原因是,各种关联矩中,化学反应率系数与浓度间的脉动关联最重要。     

三层固体材料的光声效应理论与实验

Ｒｏｓｅｎｃｗａｉｇ－Ｇｅｒｓｈｏ的光声效应理论推广应用于三层固体材料的研究。给出了在固体和气体交界处的周期温度的一般表达式，数值计算并分析了三层材料中光、热参数和样品厚度变化对光声信号幅度，相位与频率变化关系的影响，并与实验结果进行了对照。     

光促进温和条件非贵金属催化下卤代烃与二氧化碳的羰基化反应及ESR谱研究

研究了卤代烃在光促进温和条件（常温常压）非贵金属[Co(acac)₂,Co(OAc)₂或CoCl₂]催化下与二氧化碳的羰基化反应；同时对反应过程中的ESR谱进行了研究. ESR谱研究表明，在光促进下二氧化碳参与的羰基化反应中有二氧化碳游离基负离子（CO^·-₂）[用DMPO（5,5-二甲基-1-吡咯啉-N-氧化物）捕获］生成.     

炸药爆轰瞬态温度的光谱法测定

在双谱线原子发射光谱测温原理的基础上,设计了对炸药爆轰的瞬态温度进行实时测量的光纤光谱测试系统,利用光学纤维将炸药爆轰的光谱信号传入测光系统,用多通道数据采集器处理数据,系统的时间分辨率可高达0.1μs,所选择的两条谱线的波长分别为CuI 510.5和CuI 521.8nm,为炸药爆温的测量提供了一种简单有效的方法。利用该测温系统,通过对炸药爆轰光谱的测量,获得了实时瞬态爆轰温度-时间分布曲线。     

苯磺酰苯胺类药物理化性能的研究

利用高效液相色谱和分光光度法，研究了新合成的5个苯磺酰苯胺类化合物的酸离解常数和脂溶性，结果表明，他们具有较弱的酸性和合适的脂溶性。预计会有较好的抗肝片吸虫活性。     

Analysis,fabrication,and measurement of Y aperture element frequency selective surface

The analysis of Y aperture element frequency selective surface (FSS) using the spectral domain method and the moment method is presented.With the vacuum depositing and photolithography,the corresponding Y aperture element FSS was produced,and it was tested in the microwave darkroom.The calculated and measured results are in good agreement.     

Isoscaling of the Fission Fragments with Langevin Equation

The Langevin equation is used to simulate the fission process of ^112Sn ^112Sn and ^116Sn ^116Sn. The mass distribution of the fission fragments are given by assuming the process of symmetric fission or asymmetric fission with the Gaussian probability sampling. The isoscaling behaviour has been observed from the analysis of fission fragments of both the reactions, and the isoscaling parameter α seems to be sensitive to the width of fission probability and the beam energy.