荧光猝灭法对超支化聚合物囊泡温敏性翻转的研究

本文利用稳态瞬态荧光光谱法对硝酸铊猝灭芘标记超支化聚合物囊泡的机理进行了探讨,并将猝灭实验应用于超支化聚合物囊泡温敏性翻转的研究。结果发现,硝酸铊对芘标记超支化聚合物囊泡的猝灭属于动态过程,并且有选择性地猝灭囊泡双分子层的外层;聚合物链段温敏性的转变,引起该链段在囊泡双分子层间的再分布,从而导致超支化聚合物囊泡翻转。     

Image reconstruction tomography with only a method for laminar optical single Monte-Carlo simulation

Laminar optical tomography （LOT） is a new mesoscopic functional optical imaging technique. Currently, the forward problem of LOT image reconstruction is generally solved on the basis of Monte-Carlo （MC） methods. However, considering the nonlinear nature of the image reconstruction in LOT with the increasing number of source positions, methods based on MC take too much computation time. This letter develops a fast image reconstruction algorithm based on perturbation MC （pMC） for reconstructing the absorption or scattering image of a slab medium, which is suitable for LOT or other functional optical tomography system with narrow source-detector separation and dense sampling. To calculate the pMC parameters, i.e., the path length passed by a photon and the collision numbers experienced in each voxel with only one baseline MC simulation, we propose a scheme named as the trajectory translation and target voxel regression （TT＆TVR） based on the reciprocity principle. To further speed up the image reconstruction procedure, the weighted average of the pMC parameters for all survival photons is adopted and the region of interest （ROI） is extracted from the raw data to save as the prior information of the image reconstruction. The method is applied to the absorption reconstruction of the layered inhomogeneous media. Results demonstrate that the reconstructing time is less than 20 s with the X - Y section of the sample subdivided into 50 × 50 voxels, and the target size quantitativeness ratio can be obtained in a satisfying accuracy in the source-detector separations of 0.4 and 1.25 mm, respectively.     

Spectroscopic properties and mechanism of Tm^3＋/Er^3＋/Yb^3＋ co-doped oxyfluorogermanate glass ceramics containing BaF2 nanocrystals

Transparent Tm^3＋/Er^3＋/yb^3＋ co-doped oxyfluorogermanate glass ceramics containing BaF2 nanocrystals are prepared. Under excitation of a 980-nm laser diode （LD）, compared with the glass before heat treatment, the Tm^3＋/Er^3＋/yb^3＋ co-doped oxyfluorogermanate glass ceramics can emit intense blue, green and red up-conversion luminescence and Stark- split peaks; X-ray diffraction （XRD） and transmission electron microscope （TEM） results show that BaF2 nanocrystals with an average diameter of 20 nm are precipitated from the glass matrix. Stark splitting of the up-conversion luminescence peaks in the glass ceramics indicates that Tm^3＋, Er^3＋ and （or） Yb^3＋ ions are incorporated into the BaF2 nanocrystals. The up-conversion luminescence intensities of Tm^3＋, Er^3＋ and the splitting degree of luminescence peaks in the glass ceramics increase significantly with the increase of heat treat temperature and heat treat time extension. In addition, the possible energy transfer process between rare earth ions and the up-conversion luminescence mechanism are also proposed.     

Plasmon-induced absorption in stacked metamaterials based on phase retardation

In this paper, based on the constructive interference of plasmonic dipolar and quadrupolar modes, a classical analogue of electromagnetically induced absorption （EIA） is demonstrated theoretically in a stacked metamaterial consisting of a short metal strip （which acts as a bright resonator） and a long metal strip （acting as a dark resonator）, which has been reported to support the electromagnetically induced transparency （EIT） effect. The transition from EIA to EIT can be clearly observed in the absorbance spectra via varying the vertical spacing between two resonant oscillators. With the help of the coupled two-oscillator model, the phase shift between the bright and dark resonance modes is calculated by fitting the simulated absorbance spectra, which reveals the physical mechanisms behind constructive and destructive interference effects in EIT/EIA metamaterials.     

MILD煤粉燃烧湍流与化学反应相互作用的数值分析

采用计算流体动力学(CFD)数值模拟方法分析了湍流与化学反应相互作用下MILD煤粉燃烧的微观特征。比较了涡耗散模型(EDM模型)和涡耗散概念模型(EDC模型)对MILD煤粉燃烧的影响,两者得到的速度场、温度场、烟气成分等结果与实验结果符合较好.在此基础上分析了MILD煤粉燃烧湍流和化学反应的微观特征尺度,发现采用EDC模型能更准确地反映MILD煤粉燃烧的微观特征,即山于强烈的烟气内部再循环导致的高湍流混合和烟气稀释后低氧浓度下的缓慢化学反应.     

甲烷湍流射流火焰锋面结构的激光PLIF测量

利用OH-PLIF技术,研究了甲烷空气预混射流火焰,在不同出口雷诺数下,不同氮气稀释比例下火焰OH自由基的二维分布以及火焰的前锋面结构特性,以此实现对柔和燃烧的基础特性研究。实验结果显示,在获得大量氮气稀释后,预混火焰的OH浓度峰值减少了30%以上,并且整个燃烧反应明显延迟,但火焰面面密度没有发生明显变化。同时发现,改变出口雷诺数对火焰OH浓度影响较小,但是增加出口雷诺数可以扩大燃烧反应区。     

高压下超导体YBa2Cu3O7弹性性质的第一性原理研究

通过从头算密度泛函理论研究了YBa2Cu3O7的结构和弹性性质。发现c轴最容易压缩。另外,我们还计算了各种弹性性质与压强的关系,例如弹性模量,剪切模量,杨氏模量,泊松比。最后,我们获得了不同压强下的德拜温度和声速。     

石化废水处理过程中荧光有机物变化特征及去除效果

石化废水排放量大、污染物成分复杂,对环境的危害较大。采用三维荧光光谱扫描技术分析了某大型石化企业综合污水处理厂各处理单元(水解酸化+A/O+接触氧化工艺)进出水的荧光光谱特征。污水厂总进水包含四个荧光峰Peak A,Peak B,Peak D,Peak E,分别位于λex/λem=220/300,225/340,270/300,275/340nm附近,荧光物质主要来自工业废水,水解酸化池出水各荧光峰强度有所降低,位置基本不变,厌氧池出水λex/λem=250/425nm附近出现新荧光峰Peak C,好氧池出水荧光峰Peak C处荧光强度有所增强,二沉池出水Peak A消失,二沉池之后水样荧光谱图变化不大;该处理工艺对荧光有机物的总去除率为92.0%,Peak A,Peak B,Peak D,Peak E附近的荧光有机物去除率分别为100.0%,91.2%,80.3%,92.0%;污水厂进水IPeak B/IPeak E值波动较大而出水变化不大,表明该污水处理厂运行稳定,其处理工艺具有较强的抗冲击负荷能力。     

多频多色光谱角色散束匀滑新方案

典型的光谱角色散技术中,由于光束带宽受限于高效三倍频,因而无法通过增大带宽来进一步改善焦斑均匀性.结合对四色打靶方案和多级相位调制技术的综合分析,提出了多频、多色光谱角色散束匀滑新方案.该方案能在保持高效三倍频基础上,获得带宽有所加宽,光谱包络近似连续的光源,且在远场匀滑上具有更为独特的优势.结果表明,采用束匀滑新方案后,虽然焦斑会有所增大,但其均匀性却得到明显改善;与典型的束匀滑方案相比,该方案能更为有效地抑制热斑,且达到最佳匀滑效果所需的时间有所减短.此外,通过对阵列光栅中子光栅刻线方向的自由组合可以实现多维光谱角色散的效果.     

30CrMnSiNi2A晶格参量的测量及回复规律研究

针对X射线衍射领域中晶面衍射峰重叠问题,提出一种新的重叠峰分离方法.采用RU-200V转靶衍射仪对30CrMnSiNi2A晶格参量及其回复规律进行研究,得出不同回火温度下晶格参量与碳含量的变化关系.研究结果发现:由于碳的过饱和度不同以及合金元素的影响,30CrMnSiNi2A与高碳马氏体晶格参量的变化规律虽基本符合,但其变化速率存在差异.在不同回火温度下晶格参量a基本与碳含量无关,随着回火温度升高,a值略有下降.晶格参量c则随碳含量的变化幅度较大,从淬火态到180℃回火态出现一个陡降过程,随着回火温度升高,其变化幅度又趋于平缓.