Influence of the Meniscus at the Bottom of the Solid Plate on Imbibition Experiments

The analysis of the experiments on liquid imbibition into porous solids carried out by using the increase of weight technique proves the influence that meniscus formation has on the experimental increase of weight when the bottom of the porous layer is put in contact with the free surface of the liquid used to perform the penetration experiments. This process (meniscus onset) has a temporary dependence due to the change of the distance between the inferior base of the plate and the free surface of the liquid as a result of the imbibition. We have also found the proper experimental conditions under which such temporary dependence can be minimized after a short time after the start of contact between the porous layer and the free surface of the liquid utilized in the penetration procedure. Thus, the weight increase because of the meniscus formation can be assumed as a constant during the greatest part of the experiments, allowing the use of the proper mathematical form of Washburn's equation in order to describe the imbibition of the liquid into the pores of the solid. Copyright 2001 Academic Press.     

Determining concentration depth profiles in fluorinated networks by means of electric force microscopy

By means of electric force microscopy, composition depth profiles were measured with nanometric resolution for a series of fluorinated networks. By mapping the dielectric permittivity along a line going from the surface to the bulk, we were able to experimentally access to the fluorine concentration profile. Obtained data show composition gradient lengths ranging from 30 nm to 80 nm in the near surface area for samples containing from 0.5 to 5 wt. % F, respectively. In contrast, no gradients of concentration were detected in bulk. This method has several advantages over other techniques because it allows profiling directly on a sectional cut of the sample. By combining the obtained results with x-ray photoelectron spectroscopy measurements, we were also able to quantify F/C ratio as a function of depth with nanoscale resolution.     

Confinement of halide ions within homologous inverse coordination hosts; modification of halide-ion selectivity

The structures of a series of spherical host-guest complexes [{MeE(PPh)(3)Li(4)·3thf}(4)(μ(4)-X)](-) (E = Al, [1X](-); E = Ga, [2X](-); E = In, [3X](-)) reveal that changing the halide ions (X = Cl, Br, or I) within their central tetrahedral Li(4) sites has negligible effect on the structural parameters.     

Heterometallic Cu/Co and Cu/Co/Zn complexes bearing rare asymmetric tetranuclear cores: synthesis, structures, and magnetic and catalytic properties toward the peroxidative oxidation of cycloalkanes

The three novel heterometallic complexes [CuCo(III)Co(II)(2)(MeDea)(3)Cl(3)(CH(3)OH)(0.55)(H(2)O)(0.45)](H(2)O)(0.45) (1), [CuCo(III)Zn(2)(MeDea)(3)Cl(3)(CH(3)OH)(0.74)(H(2)O)(0.26)](H(2)O)(0.26) (2), and [CuCo(III)Zn(2)(MeDea)(3)Cl(3)(DMF)] (3) have been prepared using a one-pot reaction of copper powder with cobalt chloride (1) and zinc nitrate (2, 3) in a methanol (1, 2) or dimethylformamide (3) solution of N-methyldiethanolamine. A search of the Cambridge Structural Database shows that the tetranuclear asymmetric cores M(4)(μ(3)-X)(μ-X)(5) of 1-3 represent an extremely rare case of M(4)X(6) arrays. The magnetic investigations of 1 disclose antiferromagnetic coupling in a Co(II)-Cu(II)-Co(II) exchange fragment with J(Co-Cu)/hc = -4.76 cm(-1), J(Co-Co)/hc = -2.76 cm(-1), and D(Co)/hc = +34.3 cm(-1). Compounds 1-3 act as precursors for the mild peroxidative oxidation of cyclohexane to cyclohexanol and cyclohexanone with overall yields up to 23%. The synthetic and structural features as well as the thermogravimetric behavior and electrospray ionization mass spectrometry data are discussed.     

Synthetic hosts for molecular recognition of ureas

Four hosts (7-10) containing 2,6-bisamidopyridine- and 2,5-bisamidopyrrole-bearing pyridyl or 1,8-naphthyridyl groups have been prepared and their structures studied by a combination of multinuclear NMR spectroscopy and X-ray crystallography. Their behavior in molecular recognition of urea derivatives, including (+)-biotin methyl ester, has been approached by molecular modeling (Monte Carlo conformational search, AMBER force field). The minimum energy values for the complexes are correlated with the experimental binding energies determined by means of (1)H NMR titrations.     

Preparation of magnetic polymer particles with nanoparticles of Fe(0)

Iron nanoparticles (Fe(0)), were encapsulated into polymethyl methacrylate (PMMA), by means of emulsion polymerization techniques in a semicontinuous process. The final average diameter of the composite particle was calculated until three times of average particle of iron particles and were stabilized with a non-ionic surfactant. They were then characterized by scanning electron microscopy and dynamic light scattering. Their magnetic properties were determined by parallel field vibrating-sample magnetometry method. The results indicated that the magnetic properties are a function of polymer concentration in the nanocomposite particle.     

Regioselective synthesis of isochromenones by iron(III)/PhSeSePh-mediated cyclization of 2-alkynylaryl esters

A series of 4-Se-(Te, S)-isochromenones and 3-substituted isochromenones were synthesized in good yields via FeCl(3)-mediated cyclization of alkynylaryl esters with different diorganyl dichalcogenides. This methodology was carried out at room temperature, using inexpensive and environmentally friendly iron salts as metallic source and under air atmosphere. The reaction showed to be tolerant to a range of substituents bonded into the aromatic ring of the diorganyl dichalcogenides as well as to alkyl groups directly bonded to the chalcogen atom. Alternatively, the cyclization reaction of 2-alkynylaryl esters with FeCl(3), in the absence of diorganyl dichalcogenide, gave the isochromenones without the chalcogen moiety in the structure. This approach proved to be highly regioselective, providing only six-membered ring products, once the possible five-membered products were not observed in any experiments.     

Hydrogen-bond-mediated self-assembly of 26-membered diaza tetraester crowns of 3,5-disubstituted 1H-pyrazole. Dimerization study in the solid state and in CDCl3 solution

By using an improved synthetic method reported earlier, the cyclic stannoxanes obtained from RN-diethanolamine (R = Me, Bu) and dibutyltin oxide have been reacted with 1H-pyrazole-3,5-dicarbonyl dichloride to afford 26-membered diaza tetraester crowns (1, R = Me; 3, R = Bu) and 39-membered triaza hexaester crowns (2, R = Me; 4, R = Bu). The new structures were identified from their analytical and spectroscopic ((1)H and (13)C NMR, FAB-MS, and/or ESI-MS) data. Both diaza tetraester crowns (1 and 3), containing two 1H-pyrazole units, self-assemble into dimeric species through the formation of four hydrogen bonds involving the two NH pyrazole groups and the two tertiary amine groups of both crowns, as proved by X-ray crystallography and NMR analysis. Preliminary NMR, ESI-MS, MALDI-TOF-MS, and molecular modeling studies suggest that, in CDCl(3) solution, 1 interacts with ethyleneurea (ETU), affording 1:1, 2:1, and 2:2 1-ETU complexes.     

Tetrachlorocarbonyliridates: water-soluble carbon monoxide releasing molecules rate-modulated by the sixth ligand

A new family of compounds is presented as potential carbon monoxide releasing molecules (CORMs). These compounds, based on tetrachlorocarbonyliridate(III) derivatives, were synthesized and fully characterized by X-ray diffraction, electrospray mass spectrometry, IR, NMR, and density functional theory calculations. The rate of CO release was studied via the myoglobin assay. The results showed that the rate depends on the nature of the sixth ligand, trans to CO, and that a significant modulation on the release rate can be produced by changing the ligand. The reported compounds are soluble in aqueous media, and the rates of CO release are comparable with those for known CORMs, releasing CO at a rate of 0.03-0.58 μM min(-1) in a 10 μM solution of myoglobin and 10 μM of the complexes.     

Jastrow correlated and quantum Monte Carlo calculations for the low-lying states of the carbon atom

Different computational methods are employed to calculate excitation energies of the carbon atom. Explicitly correlated wave functions have been obtained in a Variational Monte Carlo calculation. Fixed node Diffusion Monte Carlo calculations for the lowest energy excited states of a given symmetry are reported. A systematic and quantitative analysis of the performance of the different schemes in the calculation of the excitation energy of up to 27 excited states of the carbon atom is carried out. The quality of the different methods have been studied in terms of the deviation with respect to the experimental excitation energies. A good agreement with the experimental values has been reached.