MOF-1和Tb@MOF-1荧光探针的设计、 合成及对痕量Cr2O72-、 S2O82-离子的识别

采用5-((4-吡啶基)甲氧基)-异烟酸(H₂PLIA)、1,3,5-三(1-咪唑基)-苯(TIB)合成了金属有机骨架[Cd(PLIA)(TIB)]_n (MOF-1),MOF-1是具有理想一维孔道的二维结构化合物,其一维孔道由柔性三角形PLIA^2-配体和刚性三角形TIB配体间隔形成。利用MOF-1 易掺杂的优势,采用后修饰合成策略制备了Tb@MOF-1。对MOF-1 和Tb@MOF-1 进行了基本表征及荧光探针性能研究。2种探针材料具有相同的结构。MOF-1和Tb@MOF-1分别对水溶液中的Cr₂O₇^2-和S₂O₈^2-离子具有较强荧光识别能力,均有响应时间快,稳定性、选择性、灵敏度高的特点。研究了MOF-1和Tb@MOF-1对Cr₂O₇^2-和S₂O₈^2-的荧光识别机理,其不同可能与Tb³⁺离子掺杂有关。     

基于2-苯基-4-喹啉酸及双咪唑类配体的钴(Ⅱ)配合物的合成、表征、磁性和电化学性质

利用2-苯基-4-喹啉酸、苯-1, 4-双(咪唑基-1-甲基)和乙酸钴在二甲基甲酰胺和水的混合溶剂中反应, 得到配合物[Co(pqba)₂(biyb)](1) (Hpqba=2-苯基-4-喹啉酸, biyb=苯-1, 4-双(咪唑基-1-甲基))。采用元素分析、红外光谱、X单晶衍射结构分析、热重分析等方法对配合物进行了表征和结构测定。配合物1属单斜晶系, C2/c空间群。配合物1中的Biyb配体采用双齿桥链模式连接金属钴离子首先形成一维“之”字链, 通过π…π堆积作用, 进一步拓展为二维超分子结构。循环伏安法测试结果说明配合物1的电解过程为准可逆过程。磁化率测量表明, 配合物1具有反铁磁性质。     

机动车尾气净化催化剂金属载体涂层的研究

采用Fe-Cr-Al-Y金属载体为研究对象,用氧化-磷化和溶胶-凝胶技术在金属载体表面形成活性γ-Al2O3涂层,实验确定了合适的磷化温度和磷化时间、溶胶中γ-Al2O3浓度和升温机制,结果证明预先在载体表面涂覆一层氧化-磷化膜,有助于提高活性组分与金属载体的结合力,可以获得高结合强度且活性组分均匀分布的涂层.     

溶胶-凝胶法制备金属基γ-Al2O3活性涂层的研究

用磷化和溶胶-凝胶技术在Fe-Cr-Al-Y合金材料表面制备活性γ-Al2O3涂层, 实验确定了合适的磷化温度、磷化时间和涂覆溶胶中Al2O3浓度; 分析了涂覆溶胶中添加剂ST(自制)含量及涂覆次数对活性涂层与基体结合力的影响. 结果证明 预先在载体表面形成一层磷化膜以及添加含量不超过0.03%的无机组分ST均可以获得高结合强度且活性组分均匀分布的涂层.     

以Na2S2O4为还原剂光度法测定废水中硝基苯

对废水中硝基苯的分光光度测定法进行了改进。提出在碱性介质中,以连二亚硫酸钠(Na2S2O4)为还原剂将硝基苯还原为苯胺,经重氮化后与N (1 萘基) 乙二胺盐酸盐偶合生成紫红色化合物,其最大吸收波长为552nm,测定范围为0～2.4mg/L,摩尔吸光系数为3.36×104L·mol-1·cm-1。     

一种用于大容量逆流色谱制备的立式多层螺旋管行星式离心机

Owing to no complications caused by solid supports, such as adsorptive sample loss and deactivation, tailing of solute peaks, and contamination, countercurrent chromatography (CCC) has been an area of intense research since the first introduction of CCC in 1970,[1] and various apparatus and broad applications have been advanced[2,3]. For these developments, the type-J synchronous planet centrifuge has received considerable attention, which relies not only on its relatively simple mechanic design, but also on its high partition efficiency and short elution time caused by mixing and settling for the efficient chromatographic separations. In the past, however, almost all of type-J centrifuges rotated slowly were disposed horizontally due to the original design and some experiments that gravis plays an important role at a low rotary speed as similar to type-V rotating multilayer helical tube in unit gravity[4-9]. In fact,we discovered that the upright apparatus holds more retention of stationary phase than the horiziontal aparatus when large standard tubings were used as mutilayer coil column and the aparatus was operated under same contions. We report here a new coil planet centrifuge with four upright cylindrical columns for large scale countercurrent chromatographic preparation. The design principle and apparatus of UCCC is as samilar to type-J multilayer coil planet centrifuge. Four uptight cylindrical column holders are symmetrically arranged around the centrifuge axis as similar to the type-J HSCCC with three horizontal multilayer coils connected in series[8] . A series of experiments indicat that upright CCC has many advantages over the horizontal CCC when using a large-bore tube as multilayer coil column for large scale countercurrent chromatographic separation.Upright CCC provide a versatile countercurrent chromatographic method for large-scale preparation from very crude sample. It has good preparative capacity and flexible suitability to various sample and two-phase system.The present apparatus not only can be operated at a high speed as similar as commonly used HSCCC for the system having short settling time and but also can be run at a low speed for the system having relative long settling time. Because of automatical control and seal-free flow through device, the uptight CCC apparatus may be readily scaled up to industrial preparation.     

季铵盐型阳离子聚合物的合成及其应用

介绍季铵盐型阳离子聚合物的合成方法,主要包括二甲基二烯丙基氯化铵、甲基丙烯酰氧乙基二甲基氯化铵、表氯醇和丙烯酰胺等单体直接聚合方法,及天然高分子和聚乙烯醇的改性制备方法等。同时总结了季铵盐型阳离子聚合物在涂料、环境、水处理等领域的应用。     

HPLC法拆分粉唑醇对映体

HPLC法拆分粉唑醇对映体;粉唑醇;对映体;分离;手性固定相     

共溶剂对超临界CO_2注入技术制备聚丙烯/SiO_2纳米复合材料的影响(英文)

采用超临界CO2注入技术制备聚合物-无机纳米粒子复合材料,以乙醇作为共溶剂,在超临界CO2中将正硅酸乙酯(TEOS)注入到聚丙烯(PP)中,重点研究共溶剂乙醇对TEOS在PP中注入率的影响.实验结果表明注入率随着共溶剂加入先增加后减小.同时研究了在共溶剂的存在下其他实验条件对注入率的影响.并采用卢瑟福背散射能谱法(RBS)分析了聚丙烯/SiO2纳米复合材料的注入元素深度分布,发现Si元素在PP中的浓度分布不均匀,随着深度的增加而减小.     

纳米材料在生物学及医学领域的应用

任何化学物质如金属、半导体、核-壳杂化材料及有机高分子等均可形成纳米材料,由于纳米材料较小的粒径、较大的比表面积,使其具有优异的光学、电学、磁学及催化性能.利用物理、化学、生物学及医学等手段,可以对纳米材料的尺度、粒径分布、形貌、表面性质及带隙等进行调控,从而使其具有特殊的性质及应用.本文就纳米材料在生物学及医学领域包...