Influence of circular aperture on high-order harmonic generation

The influence of circular aperture on the intensity of high-order harmonic generation (HHG) with intense femtosecond laser pulse was studied both experimentally and theoretically. The intensity variety of HHG with the diameter of circular aperture was observed in pulsed Ar gas. The result was discussed and interpreted in terms of the theory of Hankel transform. It is found that using the Gaussian beam truncated by an aperture could enhance the conversion efficiency of HHG at certain conditions.     

Design and analysis of the optical transceiver for mobile atmospheric laser communication

The concept of mobile atmospheric laser communication (MALC) is introduced in this paper. Atmospheric attenuation, turbulence-induced scintillation and beam wander cause deep fades in the beam power and degrade the optical channel. The optical transceiver presented in this paper is designed for a MALC test system. Currently achievable hardware performance capabilities for the MALC terminals are used as input parameters to the analysis. A novel optical transceiver structure is designed. Link margin is analyzed using the MALC analysis software, our optical link analysis program. Data rate, bit-error rate, prime transmit     

Optical properties of ZnO thin films on SiO_2 substrates deposited by radio frequency magnetron sputtering

The optical properties of both the annealed and as-deposited ZnO thin films by radio frequency (RF) magnetron sputtering on SiO2 substrates were studied. In the annealed films, two pronounced well defined exciton absorption peaks for the A and B excitons were obtained in the absorption spectra, a strong free exciton emission without deep-level emissions was observed in the photoluminescence (PL) spectra at room temperature. It was found that annealing the films in oxygen dramatically improved the optical properties and the quality of the films.     

Optimization of linear cavity design of Yb-doped double-clad fiber laser

The output characteristics of a linear cavity Yb-doped double-clad fiber (DCF) laser, including the effects of fiber length, fiber loss, and output mirror reflectivity on laser output power and threshold pump power have been studied theoretically and experimentally. In this paper, the linear cavity of double-clad fiber laser (DCFL) was composed of a pair of fiber Bragg gratings, while the facet of fiber was anti-reflection (AR) coated at 1070nm to erase the Fresnel reflection. Analysis showed that the laser output increases as the reflectivity of the fiber Bragg grating used as the output mirror decreases. At last, under the pump power of 14.4 W, single-mode laser output at 1070 nm was up to 10.8 W, with slope efficiency of 75 %.     

泡沫硅橡胶老化后的压缩性能

硅橡胶在贮存和使用过程中，常受到不同应力应变的作用，在其使用和贮存期间会产生一系列物理老化和松弛，导致其内部结构发生变化，从而引起各种性能尤其是力学性能的下降，当性能下降到一定程度时，吉卜赛材料允许使用极限，它就失去了使用价值，因此有必要对硅橡胶的库存和老化进行研究。     

利用固定化微生物技术强化降解TATB工业废水

综述九十年代以来固定化微生物技术用于难降解有机废水治理中的最新研究进展，提出了利用该技术强化降解TATB工业废水的新途径。     

用符合计数研究“钚的质量属性”与“氧化钚不存在属性”

符合计数的测量量为总中子计数和符合计数，而未知量有（α，n）中子与自发裂变中子之比α、泄漏增殖系数M1以及钚-240的质量。符合计数与源中子泄漏复度分布的二阶矩成正比。对MCNP程序进行修改，加入自发裂变源与（α，n）中子源的跟踪功能，直接得到了中子泄漏复度分布的二阶矩。     

振动环境试验设备系统仿真

振动试验系统由振动控制器、功率放大器、振动台、夹具、试件、加速度测量系统等组成。振动试验设备系统包括了除夹具、试件以外的各系统，涉及力学、电子学、计算机测量与控制等多个领域。通过对整个设备系统进行仿真，可以对振动试验开展定量的和数字化的研究，对深入认识振动试验的原理、改进和提高试验质量，具有重要意义。     

纳米Zr-V-O粉末的XRD及TG-DSC研究

利用机械合金化制备纳米Zr-V粉末，对制备过程的材料进行物相分析和热分析试验。初始粉末Zr（150μm）和V（150μm）元素粉末（纯度99．15％）按原子比1：2或1：1进行混合后在氩气气氛中放入SimoloyerCMol—2球磨仓中，按几种不同的试验条件进行球磨。同时在997K和1047K下热处理40min和1h，并对热处理前后的粉末进行了物相和TG-DSC实验分析。     

语音信号元音检测的新方法

给出了语音信号元音检测的新方法。该方法基于语音声学信号的频谱分析,不需要任何学习过程,而且适用于多种语言。利用OGI多语占语音库的英语、汉语、日语、法语四种语音对该算法进行了检测,并给出了改进算法,以及两种算法的检测率。实验结果表明该方法是检测元音的一种有效方法。