The isolated critical value phenomenon in local－global riddling bifurcation

A chaotic synchronized system of two coupled skew tent maps is discussed in this paper. The locally and globally riddled basins of the chaotic synchronized attractor are studied. It is found that there is a novel phenomenon in the local－global riddling bifurcation of the attractive basin of the chaotic synchronized attractor in some specific coupling intervals. The coupling parameter corresponding to the locally riddled basin has a single value which is embedded in the coupling parameter interval corresponding to the globally riddled basin, just like a breakpoint. Also, there is no relation between this phenomenon and the form of the chaotic synchronized attractor. This phenomenon is found analytically. We also try to explain it in a physical sense. It may be that the chaotic synchronized attractor is in the critical state, as it is infinitely close to the boundary of its attractive basin. We conjecture that this isolated critical value phenomenon will be common in a system with a chaotic attractor in the critical state, in spite of the system being discrete or differential.     

傅里叶变换红外光谱用于胆囊癌细胞及其细胞核结构的基础研究

应用傅里叶变换红外光谱(FTIR)对体外培养胆囊癌细胞、细胞核进行检测,对照胆囊癌组织光谱特征,研究胆囊癌细胞株及细胞核的光谱表现;为红外光谱法诊断胆囊癌奠定细胞学基础。应用美国Nicolet(尼高力)公司5700-Ⅱ型红外光谱仪,组织标本放置于OMNIC采样器表面进行检测,记录红外光谱;体外培养胆囊癌细胞株(GBC-SD)及提取的细胞核涂于欧米采样器表面进行红外检测,记录红外光谱,得到时间轴上体外培养细胞株及细胞核的光谱图;选择特征性光谱与胆囊癌组织光谱进行比对。结果发现胆囊癌细胞株红外光谱特征与相应癌组织光谱特征存在异同。从而可得出结论：将体外培养肿瘤细胞株及提取的肿瘤细胞核,进行FTIR测定是行之有效的细胞红外光谱检测手段,能得到体外培养细胞的红外谱图;胆囊癌组织所表现的红外光谱特征具有胆囊癌细胞本身的红外光谱特征,同时也具有组织自身的复杂特点;FTIR为应用于胆囊癌的定性诊断提供了更加丰富的细胞学基础。     

不同浓度的尾砂胶结充填体破坏过程 声发射特性试验研究*

制备了3种不同质量浓度的充填体试件,进行了单轴压缩声发射试验,分析了不同浓度的充填体力学特性,重点研究了试件破坏过程中的声发射振铃计数、声发射累计撞击数与声发射累计能量的比值(r值)、主频及其相对高频信号激增响应系数特征。研究表明：随着浓度的增加,充填体的峰值强度与弹性模量呈增大趋势,充填体中出现的声发射累计振铃计数越多;r值先升高再持续减小到一个较低值,随着外载荷的增加,进入缓慢升高阶段,峰值前均保持在该阶段。充填体破裂前兆信息在声发射信号主频分布中呈现主频段增多现象,表现为由加载初期的1~2个主频段,在临界主破裂时增多到3~5个主频段;且随着浓度的增加,声发射信号主频频段分布越宽,声发射相对高频信号(160~180 kHz)的激增响应系数呈递减趋势。以上特征可为不同浓度的尾砂胶结充填体稳定性监测、预测提供依据。     

NaGdF4纳米晶多元醇法的合成、表征与NaGdF4：Eu3+和NaGdF4：Yb3+, Er3+纳米晶的发光

通过多元醇法(polyol method)合成出NaGdF₄:Eu³⁺和NaGdF₄:Yb³⁺,Er³⁺纳米晶,利用X射线衍射(XRD)、场发射扫描电镜(FE-SEM)和傅立叶变换红外吸收光谱(FT-IR)对合成的样品进行了表征。研究了Eu³⁺掺杂样品的下转换发光和Yb³⁺/Er³⁺共掺杂样品的上转换发光。对未经退火和经过退火的样品进行了比较。     

基于模糊聚类分析和曲线拟合的FTIR不同产地鸡骨草、毛鸡骨草鉴别分析

利用傅里叶变换红外光谱技术结合模糊聚类分析法和曲线拟合对鸡骨草、毛鸡骨草进行产地鉴别。选用曼哈顿距离单位计算的相异度聚类分析结果最优,5个产地鸡骨草都可完全区分开来,毛鸡骨草则只能鉴别出3个产地,南宁和钦州2个产地发生重叠;为了进一步鉴别不同产地鸡骨草和毛鸡骨草,对鸡骨草和毛鸡骨草平均红外谱图中1 034 cm-1吸收峰进行曲线拟合,野生鸡骨草拟合出11个子峰,其他各产地鸡骨草均只能拟合出9个子峰,上林产毛鸡骨草拟合出9个子峰,其他各产地毛鸡骨草均只能拟合出8个子峰,而且不同产地鸡骨草和毛鸡骨草拟合出的子峰位置和归一化强度都不完全相同;模糊聚类分析法和曲线拟合法有机结合能够使产地鉴别结果更加准确。     

基于激光诱导叶绿素荧光寿命成像技术的植物荧光特性研究

针对植物荧光遥感探测中信号易受干扰的问题, 提出了一种用于评估植物生长状况及环境监测的荧光寿命成像技术. 采用凹透镜对355 nm波长的激光扩束, 再照射植物激发叶绿素荧光, 由增强型电荷耦合器件接收荧光信号. 采用时间分辨测量法, 连续用相同激光脉冲照射植物以激发相同的荧光信号, 同时不断改变激光脉冲触发探测器启动的延时时间, 从而能够得到完整的离散荧光信号分布图像. 对植物特定位置点产生的离散荧光信号进行拟合, 再运用一种改进型的迭代解卷积法可反演高精度的荧光寿命; 进而反演图像各点的荧光寿命以生成植物的荧光寿命分布图. 该方法所绘制的荧光寿命图比荧光强度图能更准确地反映植物内部的叶绿素含量, 并对活体植物叶绿素荧光寿命的物理特性进行了初步研究, 证明叶绿素荧光寿命与植物生理状态存在一定关联; 并且叶绿素荧光寿命与活体植物所处环境存在着复杂的关系. 未来将与生物物理学家们合作, 继续探寻叶绿素荧光寿命与植物生存环境的关系.     

电热水器能耗数值计算及保温性能优化分析

电热水器中的能量传递过程主要包括电加热丝对内胆中水的加热过程,内胆中水的自然对流过程以及通过保温层的散热过程.本文采用多尺度数值模拟方法:用LBM确定保温材料导热系数作为基于连续介质的Fluent的输入数据,对发生在电热水器中的流动和耦合传热过程进行了数值模拟,并采用UDF来控制电加热丝的动态间歇加热工作过程,建立了模拟电热水器24 h固有能耗系数测试过程的数值模拟方法.采用该方法模拟得到的能耗系数与实验值符合良好,证明了该模型的准确性。同时模拟获得了电热水器中水在加热和散热阶段的流动特性、温度分布,以及各个区域的散热占比和热流密度。提出了优化电热水器保温隔热性能的判据,为电热水器保温结构的优化提供了依据.     

Geometric quantities of lower doubly excited bound states of helium

Expectation values of single electron and interelectronic geometric quantities such as $\langle r\rangle$, $\langle r_{12}\rangle$, $\langle r_<\rangle$, $\langle r_>\rangle$, $\langle \cos\theta_{12}\rangle$ and $\langle \theta_{12}\rangle$ are calculated for doubly excited $2{\rm p}n{\rm p}\,{}^1P^{\,\rm e}\,(3\leq n\leq5),\, 2{\rm p}n{\rm p}\,{}^3\!P^{\,\rm e}\,(2\leq n\leq5)$ and $2{\rm p}n{\rm d}\,{}^{1,3}D^{\,\rm o}\,(3\leq n\leq5)$ states of helium using Hylleraas-$B$-spline basis set. The energy levels converge to at least 10 significant digits in our calculations. The extrapolated values of geometric quantities except for $\langle \theta_{12}\rangle$ reach 10 significant digits as well; $\langle \theta_{12}\rangle$ reaches at least 7 significant digits using a multipole expansion approach. Our results provide a precise reference for future research.     

4~20 K 温区固体界面导热填料接触热阻实验研究

超导量子干涉仪、 超导光子探测器等深空探测器需要液氦温区制冷技术提供极低温温度, 固体界面接触热阻的存在会增大耦合界面温度差, 进而增加制冷机系统冷损. 为定量探究4~20 K 深低温区固体接触热阻, 采用GM 作为冷源, 设计了一台可同时调节压力和低温温度的固体界面接触热阻测试实验台. 利用感压纸进行接触界面压力校核, 并对温度重复性进行验证. 实验测试了不同导热介质填充情况下, 温度和压力变化时固体接触热阻的变化规律. 基于最小二乘法对实验数据进行半经验公式拟合, 获得4 ~20 K 温区不同压力加载条件下的接触热阻的定量参考.     

Enhancing the thermoelectric performance through the mutual interaction between conjugated polyelectrolytes and single-walled carbon nanotubes

We present a method of constructing composites composed of conjugated polyelectrolytes(CPEs)and singlewalled carbon nanotubes(SWCNTs)to obtain a high-performing flexible thermoelectric generator.In this approach,three kinds of polymers,namely,poly[(1,4-(2,5-didodecyloxybenzene)-alt-2,5-thiophene](P1),poly[(1,4-(2,5-bis-sodium butoxysulfonate-phenylene)-alt-2,5-thiophene](P2),and poly[(1,4-(2,5-bis-acid butoxysulfonic-phenylene)-alt-2,5-thiophene](P3)are designed,synthesized and complexed with SWCNTs as thermoelectric composites.The electrical conductivities of the CPEs/SWCNTs(P2/SWCNTs,and P3/SWCNTs)nanocomposites are much higher than those of non-CPEs/SWCNTs(P1/SWCNTs)nanocomposites.Among them,the electrical conductivity of P2/SWCNTs with a ratio of 1:4 reaches 3686 S·cm^-1,which is 12.4 times that of P1/SWCNTs at the same SWCNT mass ratio.Moreover,CPEs/SWCNTs composites(P2/SWCNTs)display remarkably improved thermoelectric properties with the highest power factor(PF)of 163μW·m^-1·K^-1.In addition,a thermoelectric generator is fabricated with P2/SWCNTs composite films,and the output power and power density of this generator reach 1.37μW and 1.4 W·m;(cross-section)at△T=70 K.This result is over three times that of the thermoelectric generator composed of non-CPEs/SWCNTs composite films(P1/SWCNTs,0.37μW).The remarkably improved electrical conductivities and thermoelectric properties of the CPEs/SWCNTs composites(P2/SWCNTs)are attributed to the enhanced interaction.This method for constructing CPEs/SWCNTs composites can be applied to produce thermoelectric materials and devices.