铁氰化锰修饰玻碳电极的制备及其电化学性能

A thin film of manganese hexacyanoferrate （MnHCF） was electrochemically formed on a glassy carbon （GC） electrode to prepare a chemically modified electrode （CME）. The mechanism of film formation of MnHCF and its growth process were investigated in detail by cyclic voltammetry. The results show that the stoichiometric composition of MnHCF is Mn^ⅢFe^Ⅲ（CN）6, an analogue of prussian yellow. There exist three clear-cut stages in the whole modification process and the last stage is indispensable to the fabrication of homogenized, stable MnHCF film and must last for an appropriate time. The surface morphology of MnHCF/GC electrode was characterized by scanning electron microscopy （SEM）, which further verified the effective deposition of MnHCF film on GC. The kinetic constants of MnHCF/GC electrode process were also evaluated. The resulting MnHCF film modified electrode presented good stability and high electrocatalytic activity toward the oxidation of H2O2, indicating that MnHCF film possesses function of catalase and can be expected for analytical purposes.     

高稳定性CaO-ZrO2固体碱催化剂的表征和催化性能

用共沉淀法经高温焙烧制备了CaO摩尔分数从10%至50%的CaO-ZrO₂系列催化剂, 将其应用于碳酸丙烯酯和甲醇酯交换合成碳酸二甲酯过程, 并通过XRD, FT-IR, BET, ICP, CO₂-TPD, XPS等表征手段研究了催化剂的物性及其催化性能随组成变化的的规律. 结果表明, 当CaO摩尔分数高于30%时, 表面出现游离的CaO, 虽然具有强碱性和高活性, 但是稳定性差; 而当CaO摩尔分数低于30%时, Ca^2＋进入ZrO₂晶格, CaO与ZrO₂形成连续固溶体, 并且随着CaO含量的增加, 晶格氧的电荷密度增加, 催化剂的碱性增强, 使得CaO-ZrO₂催化剂在碳酸丙烯酯和甲醇酯交换合成碳酸二甲酯过程中获得了高活性和高稳定性.     

小分子配体诱导合成N,N-二苄基二硫代氨基甲酸镉(II)配合物及晶体结构

4,4'-联吡啶与二苄基二硫代氨基甲酸镉配合物[Cd(DBTC)₂]₂ (1)反应得到加合物[Cd(DBTC)₂(4,4'-bipy)] (2) (DBTC＝N,N-二苄基二硫代氨基甲酸), 通过晶体结构分析及红外光谱等研究其结构与性质. 结果表明: 引入小分子配体会破坏[Cd(DBTC)₂]₂ (1)的二聚结构, 加入吡啶则得到单核的吡啶加合物[Cd(DBTC)₂py] (3), 而引入4,4'-联吡啶后其结构变为新型的一维链状结构的配位聚合物2, 这种结构在二硫代氨基甲酸金属配合物中少见报道. 也比较了不同配体如吡啶及4,4'-联吡啶对Cd(II)及Zn(II)配合物结构的影响.     

大气条件下O3与乙炔反应速率常数的测定

O₃是对流层大气中一种重要的氧化剂, 其与反应活性气体的反应是大气对流层中重要的反应过程, 对于研究空气污染的对策有重要意义. 我们使用自行建设的烟雾箱模拟反应装置, 结合O₃分析仪和气相色谱研究了O₃和乙炔的反应. 研究测得O₃和乙炔在室温下(15 ℃)反应的4次实验的速率常数的平均值为4.13×10^－21 cm³•molecule^－1•s^－1, 其变动系数为7%. 与文献中采用其它方法得到的实验值相吻合. 所得结果表明, 我们测定的反应速率常数有较高的精密度, 我们所建的大气反应烟雾箱模拟系统是可靠的, 可以用于大气O₃浓度条件下O₃的其它大气化学反应过程的深入研究, 为进一步深入研究大气中其它重要反应活性气体的化学反应提供了一定的基础.     

Synthesis and Characterization of Fluoro- and Chloro- bimetallic Alkoxides as Precursors for Luminescent Metal Oxide Materials via Sol-Gel Technique

Heterobimetallic alkoxides are broadly recognized as versatile precursors for luminescence materials, and efforts are being made to develop novel routes by applying the concept of geometrical molecular design, for their synthesis and to design a single source precursor suited to photoluminescent materials. Novel and new series of bimetallic alkoxides has been prepared by metathesis route. They exhibit a lower sensitivity towards hydrolysis and so they are easier to handle as compared to other alkoxides. All the compounds were characterized by elemental analysis, FT-IR and multinuclear NMR spectroscopies. FT-IR revealed that the molecular structure of these metal alkoxides was retained to a large extent in 4 ： 1 halogenated alcohol-benzene solution. The heteronuclear NMR spectroscopy provided useful information about chemical shifts for better understanding the likely structure based on interactions with their coordinate metals. The mass spectra show similar types of fragmentation pattern. SEM-EDS analyses showed consistency with the formulation. XRD patterns show an enhanced homogeneity at high temperature. TGA measurements show that thermal decomposition occured in steps that depended entirely on the chemical compositions and the synthesis routes. SEM observation reveals that the morphology and particle size strongly depend on synthesis routes for their precursors.     

气态CF_2CIBr的紫外光解离

本文研究了气态CF_2ClBr在253.7nm紫外光照下的光解离过程及光氧化机理.CF_2ClBr-O_2体系光解离的主要产物CF_2O,Cl_2和Br_2,另外还有少量的CO_2,SiF_4生成;该体系中CF_2ClBr的解离为一级反应,光解离速率常数为1.89×10~(-5)s~(-1);CF_2ClBr的表观量子产率近似为1.在这些基础上讨论了光解离过程及光氧化机理.     

BaCe0.8Ho0.2O3-a陶瓷的性质与应用

Ceramic BaCe0.8Ho0.2O3-α with orthorhombic perovskite structure was prepared by conventional solid state reaction, and its conductivity and ionic transport number were measured by ac impedance spectroscopy and gas concentration cell methods in the temperature range of 600-1000 ℃ in wet hydrogen and wet air, respectively. Using the ceramics as solid electrolyte and porous platinum as electrodes, the hydrogen-air fuel cell was constructed, and the cell performance at temperature from 600-1000 ℃ was examined. The results indicate that the specimen was a pure protonic conductor with the protonic transport number of 1 at temperature from 600-900 ℃ in wet hydrogen, a mixed conductor of proton and electron with the protonic transport number of 0.99 at 1000 ℃. The electronic conduction could be neglected in this case, thus the total conductivity in wet hydrogen was approximately regarded as protonic conductivity. In wet air, the specimen was a mixed conductor of proton, oxide ion and electron hole. The protonic transport numbers were 0.01-0.09, and the oxide-ionic transport numbers were 0.27-0.32. The oxide ionic conductivity was increased with the increase of temperature, but the protonic conductivity displayed a maximum at 900 ℃, due to the combined increase in mobility and depletion of the carriers. The fuel cell could work stably. At 1000 ℃, the maximum short-circuit current density and power output density were 346 mA/cm^2 and 80 mW/cm^2, respectively.     

基于一次性薄层色谱电极高选择电化学发光分析法测定Ni(II)的研究

基于一种新的电极制作方法, 研制了具有薄层色谱分离功能的一次性薄层色谱电极. 结合该电极的分离、保留分析物于电极表面一定空间区域的色谱分离能力与电极表面电化学发光信号的空间分辨能力, 实现了分析物的高效分离与原位高灵敏度电化学发光(ECL)检测, 建立了电化学发光分析方法与薄层色谱分离方法联用的新技术. 并以Ni^2＋离子为代表探讨了这一方法的可行性和分析特性. 在最佳的实验条件下, 该方法测定Ni^2＋离子的线性范围为5.0× 10^－9～5.0×10^－6 g/mL, 检出限为1.5×10^－9 g/mL, 相对标准偏差为2.8% (c＝1.0×10^－6 g/mL, n＝11).     

新型吡啶[2',1': 5,1]吡唑[4, 3-d]嘧啶-4-酮类化合物的合成及其对PDE5酶的抑制活性研究

设计、合成出了新型吡啶并吡唑并嘧啶酮类化合物。目标化合物的生物活性评价结果显示，该类化合物对血小板中的PDE5酶具有较强的拟制活性，但略弱于西地那非。     

离子液体BMIBF4性质的研究

用最大气泡法和韦氏天平法, 在278.15～343.15 K范围内测定了离子液体BMIBF₄的表面张力和密度; 讨论了这个离子液体的体积性质和表面性质; 根据离子个头大又极不对称的特点, 提出了离子液体的空隙模型. 根据空隙模型计算的离子液体恒压热膨胀系数与实验值相比, 偏差在10%左右.