吸收光谱光路的设计与误差

固体、液体和气体物质的吸收光谱是大学普物、光学专业的一个基本实验．如何在普通的设备和实验条件下，较为准确地测量吸收系数？本文从朗伯定律出发，介绍一种“对数测量法”光路．并对实验中出现的“负吸收系数”等误差作了分析．文中还介绍了消除材料样品对探测光的反射误差的固体、液体样品架．     

The geometry structures and electronic properties of Li_mB_n(m+n=12) clusters

The geometric structures, electronic properties, total and binding energies, harmonic frequencies, the highest occupied molecular orbital to the lowest unoccupied molecular orbital energy gaps, and the vertical ionization potential energies of small LimBn （m＋ n = 12） clusters were investigated by the density functional theory B3LYP with a 6-31 I＋G （2d, 2p） basis set. All the calculations were performed using the Gaussian09 program. For the study of the LimBn clusters, the global minimum of the B 12 cluster was chosen as the starting point and the boron atoms were gradually replaced by Li atoms. The results showed that as the number of Li atoms increased, the stability of the LimBn cluster decreased and the physical and chemical properties became more active. In addition, on average there was a large charge transfer from the Li atoms to the B atoms.     

高分辨率空间相机精密热控设计及验证

基于波像差分配理论,提出了某高分辨率空间相机的热控指标.在分析相机空间外热流环境的基础上,进行了热控方案设计,并利用热分析软件进行了高低温工况下的瞬态热分析.结合热平衡试验验证了热设计的有效性和正确性.     

二元整系数多项式因式分解的一种理论和算法

我们发现可以把二元多项式盾成系数为一元多项式的一元多项式来进行分解，据此，本文建立了二元整系数多项式因式分解的一种理论，提出了一个完整的分解二元整系数多项式的算法。这个算法还能很自然地推广成分解多元整系数多项式的算法。     

超强激光-等离子体相互作用过程中的辐射阻尼效应

基于包含辐射阻尼效应的电子运动方程,通过坐标变换,分析了圆极化和线极化超强激光在等离子体中传播时,辐射阻尼效应对电子运动的影响。结果表明:两种极化情况下,辐射阻尼效应都随等离子体密度的增大而增强;在圆极化激光中,激光强度在1023~1026 W/cm2范围(对应于不同的等离子体密度)时,辐射阻尼效应将对电子的运动产生显著的反作用,而对于线极化激光,只有当激光强度远大于极限光强时,辐射阻尼效应才对电子的运动有明显的作用。     

非自治刚性随机微分方程正则EM分裂方法的收敛性和稳定性

本文研究了数值求解非自治随机微分方程的正则Euler-Maruyama分裂（CEMS）方法,该方程的漂移项系数带有刚性且允许超线性增长,扩散项系数满足全局Lipschitz条件.首先,证明了CEMS方法的强收敛性及收敛速度.其次,证明了在适当条件下CEMS方法是均方稳定的.进一步,利用离散半鞅收敛定理,研究了CEMS方法的几乎必然指数稳定性.结果表明,CEMS方法在漂移系数的刚性部分满足单边Lipschitz条件下可保持几乎必然指数稳定性.最后通过数值实验,检验了CEMS方法的有效性并证实了我们的理论结果.     

X射线光谱数据处理平台的优化设计

在低计数率背景下X射线谱的高精度测量受X射线流的统计涨落影响,统计涨落决定了给定探测器能量分辨率的理论极限,而其他因素的影响则可以通过适当的噪声滤除和电子技术来降低.以往关于能量分辨率的研究大多利用谱反卷积对获取到的能谱进行后处理,从而降低特征峰的半高宽(FW H M).这些后处理方法是基于将获取到的能谱建模为输入能谱...     

k圈图的最大Laplace分离度

设$ G $是一个$ n $阶$ k $圈图, $ k $圈图为边数等于顶点数加$ k-1 $的简单连通图。$ \mu_{1}(G) $、$ \mu_{2}(G) $分别记为图$ G $的Laplace矩阵的最大特征值和次大特征值, 图$ G $的Laplace分离度定义为$ S_{L}(G)=\mu_{1}(G)-\mu_{2}(G) $。本文研究了给定阶数的$ k $圈图的最大Laplace分离度, 并刻画了相应的极图, 其结果推广了已有当$ k=1, 2, 3 $时的结论。     

Experimental study on laser cleaning of paint layer on white marble surface北大核心CSCD

In order to effectively remove the surface paint of the cultural relic of white marble, the area extrapolation method and laser-induced plasma spectroscopy (LIPS) method were used to obtain the ablation threshold power of the gold, silver paint layer and white marble surface. On the basis of this, the optimal laser power for removing paint without damaging the white marble substrate was determined. The image processing method was used to study the cleaning degree and variation trend of cleaning rate of the gold and silver paint on the surface of 10 mm×10 mm white marble by laser cleaning, and the optimal laser spot overlap rate and the optimal cleaning times were obtained. Finally, the image processing method was used to evaluate the cleaning effect of laser cleaning of paint layer on the white marble surface. More than 93% of the cleaning degree shows that the synergistic use of the area extrapolation method, LIPS method and image processing method can effectively improve the laser cleaning efficiency of the paint layer on white marble surface. Copyright ©2022 Journal of Applied Optics. All rights reserved.     

一项从CAA到CAD的工作 ～正交优化法与SPICE相结合

电子电路的计算机辅助设计方法是促进电子技术发展的一种有效工具。本文介绍如何将行之有效的正交优化法与国际盛行的模拟电子电路的分析程序ＳＰＩＣＥ相结合，形成了ＡＣＯＤ软件，将ＣＡＡ扩展为ＣＡＤ。