三硼酸锂晶体的生长形态

用自由生长系统研究了三硼酸锂ＬｉＢ_３Ｏ_５（ＬＢＯ）晶体的实际生长形态。实验表明，它的各晶面簇的重要性的顺序为：｛１１０｝＞｛０１１｝＞｛２０１｝＞｛１１１｝。讨论了ＬＢＯ晶体的生长习性与内部结构之间的关系并应用负离子配位多面体理论模型解释了ＬＢＯ晶体的生长形态。     

Hydrothermal Synthesis and Crystal Structure of a Novel Isophthalate-bridged Copper(II) Polymer with Two-dimensional Network Structure: [Cu_2(phen)(ipt)_2]_(2n)·nH_2O (ipt = isophthalate, phen = 1,10-phenanthroline)

1 INTRODUCTION donor due to the presence of the protonated carboxyl group; (d) it can form short bridges via one car- Coordination polymers are of great interest due to boxylato end or long bridges via the benzene ring[7]. their physical properties and potential applications in We believe that coordination functionality of isoph- functional materials[1~3]. Aromatic polycarboxylic acids thalate can lead to interesting structures. In this com- such as 1,2,4,5-benzenetetracarboxylic acid[4],…     

试剂加入次序不同造成镉对肝脂质过氧化的诱导或拮抗作用

采用TBA检测方法，体外观察了CaCl2对大鼠线粒体脂质过氧化产物丙二醛(MDA)生成的毒性作用和对半胱氨酸-Fe^2 诱导的线粒体脂质过氧化的影响。结果表明，1 μmol／L～1mol／L CdCl2均能诱导肝线粒体的脂质过氧化，使MDA含量增加，但只有CdCl2浓度高于1 mmol／L时，诱导作用才与对照组有显著性差异。在Fe^2 -Cd^2 半胱氨酸共同对肝线粒体作用时，由于试剂加入顺序的不同，100～1000 mmol／L CdCl2对线粒体脂质过氧化可产生诱导或拮抗作用。结果提示，CdCl2可直接诱导线粒体脂质过氧化，在做几种金属离子体外协同对肝脂质过氧化影响的实验时，应考虑试剂加入顺序所产生的不同影响。     

新型一维梯状双链配位聚合物{[Cu(malate)(2,2'-bipy)]•3H2O}∞的合成、晶体结构与表征

合成了铜(II)与羟基丁二酸和2,2'-联吡啶形成的配位聚合物{[Cu(malate)(2,2'-bipy)]•3H₂O}_∞ (其中malate＝羟基丁二酸根, 2,2'-bipy＝2,2'-联吡啶), 通过X射线衍射测定了单晶结构, 并进行了元素分析、红外光谱、紫外光谱、热分析等研究. 配合物属单斜晶系, 空间群P2(1)/c; 晶胞参数: a＝0.70132(10) nm, b＝1.9730(3) nm, c＝1.18998(16) nm, β＝94.551(3)°; Z＝2; 最终偏离因子R＝0.0483. 配合物中每个铜(II)原子与来自2,2'-联吡啶的两个氮原子和两个羟基丁二酸根的三个氧原子配位, 形成畸变的三角双锥结构单元. 每个羟基丁二酸根以R构型方式桥联两个三角双锥结构单元, 沿a轴方向无限延伸形成一维链. 两条平行链以面对面的方式重叠, 彼此吡啶环之间存在强的(-(相互作用, 加之C_吡啶环—H…O_羧基弱相互作用形成新颖的梯状双链结构, 比邻的梯状双链又通过分子间O_羟基-H…O_羧基氢键沿a轴方向共同构筑了具有隧道的三维结构.     

Synthesis and Crystal Structure of 1,4-Bis(2-hydroxymethylphenyl)-1,4-dioxabutane

1 INTRODUCTION Macrocyclic ligands and their metal complexes have received much attention due to their applications in ion transport, ion separation and as models in biomimic researches[1~7]. The synthetic methods of macrocyclic ligands and their metal complexes are mainly divided into three kinds[8]. The first one is synthesizing free ligand, then forming the metal complexes; the second is template synthesis; and the third is synthesizing the end-off or side-off precursor ligand, then c…     

Determination of six metals in galician red wines (in northwestern Spain) by capillary electrophoresis

A simple technique is described for the routine simultaneous capillary electrophoretic determination of 6 cations in wine. Separation was achieved on a fused silica capillary column with a UV-Cat-1, alpha-hydroxysobutyric acid and 18-crown-6-ether buffer at pH 4.5 and indirect UV detection at 214 nm. The content of magnesium, sodium, potassium, calcium, manganese, and lithium was determined. The method is quantitative, with recoveries in the 92-102% range, and linear over more than one order of magnitude. The precision is better than 2.5-3.4%. The method is sensible, with detection limits between 0.01 and 0.06 mg/L. Twenty-five red wines with a Certified Brand of Origin from Galicia (north-western Spain) were analyzed by the proposed method. Various wines showed very similar electrophoretic profiles, but significant quantitative differences were observed.     

THF—FER沸石的系列研究—1．晶体结构稳定性

四氢呋喃（THF）-Na2O-SiO2-Al2O3-H2O体系水热合成的THF-FER沸石，经酸交 换-焙烧脱THF（Ⅰ）或焙烧脱THF-酸交换（Ⅱ）的不同方式处理，均可制得低钠H- FER沸石。经XRD，^27Al与^29Si MAS NMR,低温氮吸附等表征证明，通过1273K高温 的热处理和1073K饱和水蒸气下的水热处理，H-FER沸石骨架保持高度稳定。在高温 水蒸气作用下，Si(2Al）容易从骨架上脱离，而Si(1Al）则保持相对稳定，以（Ⅱ ）方法处理，制备的H-FER沸石在水热条件下易产生较多的硅差劲基缺陷。经高温 热和水热处理后，H-FER沸石孔道结构基本保持完美、开放。     

The use of emulsions for the determination of methylmercury and inorganic mercury in fish-eggs oil by cold vapor generation in a flow injection system with atomic absorption spectrometric detection

An on-line time based injection system used in conjunction with cold vapor generation atomic absorption spectrometry and microwave-aided oxidation with potassium persulfate has been developed for the determination of the different mercury species in fish-eggs oil samples. A three-phase surfactant-oil-water emulsion produced an advantageous flow when a peristaltic pump was used to introduce the highly viscous sample into the system. The optimum proportion of the oil-water mixture ratio was 2:3 v/v with a Tween 20 surfactant concentration in the emulsion of 0.008% v/v. Inorganic mercury was determined after reduction with sodium borohydride while total mercury was determined after an oxidation step with persulfate prior to the reduction step to elemental mercury with the same reducing agent. The difference between total and inorganic mercury determined the organomercury content in samples. A linear calibration graph was obtained in the range 0.1-20 micrograms l-1 of Hg2+ by injecting 0.7 ml of samples. The detection limits based on 3 sigma of the blank signals were 0.11 and 0.12 microgram l-1 for total and inorganic mercury, respectively. The relative standard deviation of ten independent measurements were 2.8 and 2.2% for 10 micrograms l-1 and 8.8 and 9.0% for 0.1 microgram l-1 amounts of total and inorganic mercury, respectively. The recoveries of 0.3, 0.6 and 8 micrograms l-1 of inorganic and organic mercury added to fish-eggs oil samples ranged from 93.0 to 94.8% and from 100 to 106%, respectively. Good agreement with those values obtained for total mercury content in real samples by electrothermal atomic absorption spectrometry was also obtained, differences between mean values were < 7%. With the proposed procedure, 22 proteropterous catfish-eggs oil samples from the northwestern coast of Venezuela were measured; while the organic mercury lay in the range 2.0 and 3.3 micrograms l-1, inorganic mercury was not detected.