Hypernuclear production with a strong spin-flip

A kinematically correct treatment of the full transition amplitude for many-body hypernuclear production is presented. By an example of (⁺, K⁺) reaction, effects of the spin-flip amplitude and its interference with the spin-non-flip amplitude are demonstrated and specified for ¹² C.Dedicated to Academician Václav Votruba on the occasion of his eightieth birthday.The discussions with many colleagues are appreciated, in particular those with R. Mach, L. Majling and T. Motoba were of much use.     

Sensitised decomposition of microcystin-LR using UV radiation

UV radiation was applied to degrade cyanobacterial hepatotoxin, microcystin-LR in the presence of phycocyanin as a model natural sensitiser. The concentrations of both the toxin and the pigment used in the experiments were higher by several orders of magnitude than found in the environment. The photoreaction parameters were optimised. The process was found to be of limited use for water treatment due to its low efficacy. Additionally, pronounced UV-induced bleaching of the pigment significantly reducing the photoreaction rates of the toxin was observed for the highest UV radiation intensities applied.     

Diphenyldichlorophosphonium trichloride-chlorine solvate 1:1, [PPh2Cl2]+Cl(3)(-).Cl2: an ionic form of diphenyltrichlorophosphorane. Crystal structures of [PPh2Cl2]+Cl(3)(-).Cl2 and [(PPh2Cl2)+]2[InCl5](2-)

An ionic form of diphenyltrichlorophosphorane, namely, diphenyldichlorophosphonium trichloride isolated as a dichlorine solvate (1), was obtained by treating PPh(2)Cl(3) with excess chlorine. The identity of this species was established by single-crystal X-ray analysis and (31)P, (1)H, and (35)Cl NMR and Raman spectra. Bis(diphenyldichlorophosphonium) pentachloroindate (2) was obtained by the reaction of diphenyltrichlorophosphorane with indium trichloride in dichloromethane for comparison purposes. Its identity was determined by (31)P NMR spectra and single-crystal X-ray analysis.     

Reliable evaluation of temperature-independent parameters in correlation of vapour–liquid equilibrium data

A new algorithm/program has been elaborated for simultaneous processing of different sets of vapour–liquid equilibrium data. The program was tested with six binary hexane + isomeric pentanol systems, each of them measured at three different isobaric conditions and one isothermal system of tert-butyl-methyl-ether + 2-methyl-2-propanol measured at three different temperatures. The correlation uses the maximum likelihood method, taking into account real behaviour of vapour phase. The parameters obtained are valid within the whole temperature range of the data, and are consistent in comparison with those obtained from individual correlations of isobars or isotherms. Results are presented for the Wilson and NRTL equations.     

Bonding Properties of a Novel Inorganometallic Complex, Ru(SnPh(3))(2)(CO)(2)(iPr-DAB) (iPr-DAB = N,N'-Diisopropyl-1,4-diaza-1,3-butadiene), and its Stable Radical-Anion, Studied by UV-Vis, IR, and EPR Spectroscopy, (Spectro-) Electrochemistry, and Density Functional Calculations

Ru(SnPh(3))(2)(CO)(2)(iPr-DAB) was synthesized and characterized by UV-vis, IR, (1)H NMR, (13)C NMR, (119)Sn NMR, and mass (FAB(+)) spectroscopies and by single-crystal X-ray diffraction, which proved the presence of a nearly linear Sn-Ru-Sn unit. Crystals of Ru(SnPh(3))(2)(CO)(2)(iPr-DAB).3.5C(6)H(6) form in the triclinic space group P&onemacr; in a unit cell of dimensions a = 11.662(6) ?, b = 13.902(3) ?, c = 19.643(2) ?, alpha = 71.24(2) degrees, beta = 86.91(4) degrees, gamma = 77.89(3) degrees, and V = 2946(3) ?(3). One-electron reduction of Ru(SnPh(3))(2)(CO)(2)(iPr-DAB) produces the stable radical-anion [Ru(SnPh(3))(2)(CO)(2)(iPr-DAB)](*-) that was characterized by IR, and UV-vis spectroelectrochemistry. Its EPR spectrum shows a signal at g = 1.9960 with well resolved Sn, Ru, and iPr-DAB (H, N) hyperfine couplings. DFT-MO calculations on the model compound Ru(SnH(3))(2)(CO)(2)(H-DAB) reveal that the HOMO is mainly of sigma(Sn-Ru-Sn) character mixed strongly with the lowest pi orbital of the H-DAB ligand. The LUMO (SOMO in the reduced complex) should be viewed as predominantly pi(H-DAB) with an admixture of the sigma(Sn-Ru-Sn) orbital. Accordingly, the lowest-energy absorption band of the neutral species will mainly belong to the sigma(Sn-Ru-Sn)-->pi(iPr-DAB) charge transfer transition. The intrinsic strength of the Ru-Sn bond and the delocalized character of the three-center four-electron Sn-Ru-Sn sigma-bond account for the inherent stability of the radical anion.     

Polyethene with pendant fullerene moieties

Polyethene with fullerene moieties pendant on short-chain branches was prepared by the catalytic copolymerization of ethene and a fullerene-containing vinylic comonomer, yielding polyethene copolymers containing up to 25 wt% of C60.     

Intercalation of Dyes Containing SO3H Groups into Zn–Al Layered Double Hydroxide

The intercalates of Naphthol Yellow S, Tropaeolin 000, and Tropaeolin 00 were prepared by heating [Zn_0.67Al_0.33(OH)₂](CO₃)_0.165 · 0.5H₂O with acidic forms of the dye solutions in an open reaction vessel. The intercalates were characterized by chemical and thermal analysis, X-ray powder diffraction and UV–VIS spectroscopy. A possible arrangement of the dye molecules in the intercalates was suggested on the basis of their chemical compositions and interlayer distances, by taking into account van der Waals dimensions of the guest molecules and by assuming that the structure of the host layers is not changed during the intercalation process.     

Dynamic imaging of single DNA-protein interactions using atomic force microscopy

Atomic force microscopy (AFM) imaging of static DNA-protein complexes, in air and in liquid, can be used to directly obtain quantitative and qualitative information on the structure of different complexes. For example, DNA length, the location of preferential binding sites for proteins and bending of DNA as a result of the complexation can all be measured. Recording consecutive AFM images of DNA and protein molecules under conditions that they are still able to move and interact, or dynamic AFM imaging, however, can reveal information on the dynamic aspects of the interactions between these molecules. Here, an overview is given of the technical challenges that need to be considered for successful dynamic AFM imaging studies of individual DNA-protein interactions. Necessary technical improvements to the AFM set-up and the development of new sample preparation methods are described in this paper.     

Study on the electroreduction of In(III) ions at gold from acidic bromide solutions by the rotating ring-disc electrode technique

The mechanism of the indium electrodeposition on gold from acidic KBr solutions has been investigated by means of the rotating ring-disc electrode technique. The measurements showed that the overall electrode reaction In(III) + 3 e In consists of two successive charge transfer steps, i.e. In(III) + 2 e In(I) and In(I) + e In, with soluble monovalent indium as an intermediate. The current efficiency for In(I) generation under steady-state conditions is 100% in the case of low disc current densities. The disproportionation of In(I) in the bulk of solution occurs in slightly acidified solutions,pH=2, in addition to the In(I) electrochemical reduction. Based on the ring current transients, it was established that the two-electron transfer step is preceded by the formation of a thin passive film of indium metal.

---

Untersuchung der elektrochemischen Reduktion von In(III)-Ionen an Gold in sauren Bromidlösungen mit der rotierenden Ring-Scheiben-Elektrode

Zusammenfassung Mit Hilfe der rotierenden Ring-Scheiben-Elektrode wurde der Mechanismus der kathodischen Abscheidung von Indium auf Gold in sauren KBr-Lösungen untersucht. Aus den Messungen folgt, daß die Bruttoreaktion In(III) + 3e In über zwei aufeinanderfolgende Durchtrittsreaktionen, In(III) + 2 e In(I) und In(I) + e In, mit löslichem einwertigem Indium als Zwischenprodukt abläuft. Bei kleinen Stromdichten werden die In(I)-Ionen mit 100%iger Stromausbeute erzeugt. In schwächer sauren Lösungen (pH=2) konnte außer der elektrochemischen Reduktion von In(I) zusätzlich dessen Disproportionierung innerhalb der Lösung ermittelt werden. Auf Grund der Ringstrom-Zeit-Kurven wurde auch festgestellt, daß die Bildung von einer dünnen In-Metallschicht, die ein passives Verhalten aufweist, dem Zweielektronenübergang vorangegangen ist.