Effect of carbon black on the thermal properties and flammability of cis-1,4-polyisoprene vulcanizates

The effect of carbon black with various particle sizes and specific surfaces on the thermal properties of the sulphur vulcanizates ofcis-1,4-polyisoprene was studied by means of thermal analysis. It was found that the addition of carbon black does not change the nature of the thermal processes in isoprene rubber vulcanizates essentially, but it distincly affects the positions of the peaks recorded in the DTA curves. The specific surface of carbon black affects the temperature of the first exothermic process and the temperature and rate of destruction of cross-linked polyisoprene. The presence of carbon black brings about a reduction in the flammability ofcis-1,4-polyisoprene vulcanizates. The specific surface of carbon black influences the value of the oxygen index OI.

---

Zusammenfassung Mittels Thermoanalyse wurde der Einfluß von Ruß mit unterschiedlicher Partikelgröße und unterschiedlicher spezifischer Oberfläche auf die thermischen Eigenschaften von Schwefelvulkanisaten von cis-1,4-Polyisopren untersucht. Es wurde festgestellt, daß die Zugabe von Ruß die thermischen Vorgänge in Isoprengummivulkanisaten nicht wesentlich verändert, daß jedoch die Lage der in den DTA-Kurven aufgezeichneten Peaks eindeutig beeinflußt wird. Die spezifische Oberfläche von Ruß beeinflußt die Temperatur des ersten exothermen Vorganges sowie Temperatur und Geschwindigkeit von Abbau des vernetzten Polyisoprenes. Die Gegenwart von Ruß führt eine Verminderung der Entflammbarkeit voncis-1,4-Polyisopren-Vulkanisaten herbei. Die spezifische Oberfläche von Ruß beeinflußt den Wert der Sauerstoffzahl.

     

Electrochemical detector with a 20 nl volume for micro-columns liquid chromatography

Summary A flow-through two electrode wall-jet cell with a platinum measuring electrode and a cell volume of 20 nl has been designed and evaluated. It has been used to detect phenols by reversed phase liquid chromatography using short micro bore columns. The linear dynamic range between the measured current and the concentration is greater than 10³ (1.5×10^–7–5×10^–4 mol/l) and the minimum analyzable amount was found to be 10 pg for pyrocatechol. A negligible broadening in the detector permits the use of micro columns down to 0.5 mm internal diameter, packed with 5 m particles, without any substantial distortion of eluted zones.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Dipole moments and structure of poly(epoxypropylcarbazole)

The mean-square molecular dipole moments 〈μ²〉 of carbazole, N-ethylcarbazole and of the sequence of poly(epoxypropylcarbazole) (PEPCa) oligomers of various molecular weights have been evaluated in solutions of these organic compounds in dioxan. For PEPCa the values of 〈μ²〉 have also been determined in the solid state. On the basis of the experimental results and of molecular mechanics calculations it has been shown that the orientation of the lateral group of PEPCa favors noninteracting racemic dyads. The temperature-dependence of the effective dipole moment of solid PEPCa follows the Onsager theory above 295 K.     

Effect of stabilizers in the thermal treatment of PVC—IX. An investigation of the loss of Ba and Cd stearates from their equimolar mixture during static thermal stress of PVC—IX

Thermal degradation at 180° in air of PVC stabilized with an equimolar mixture of Ba and Cd stearates has been studied. The “unreacted” stearates were separated by filtering tetrahydrofuran solutions of samples. The filtration and thermal degradation were examined by means of infrared spectroscopy in the range 1400–1800 cm^?1. It has been demonstrated that, during the thermal stress, CdCl₂ is accumulated in the sample and that the presence of Ba stearate supports only the consumption of Cd stearate.     

Frequent analytical/experimental problems in lipase-mediated synthesis in solvent-free systems and how to avoid them

Compared with chemical catalysis, enzymatic catalysis is a relatively new topic. Experimental work involving lipases deserves careful attention and accurate procedures still need to be implemented. A rapid but careful survey of published data immediately demonstrates that experiments performed under similar conditions with similar reagents have led to very different results. The aim of this work is to point out the importance of accurate and systematic procedures in order to ensure the reproducibility of experimental data. We strongly believe that different results found by different labs are due to problems detected in the procedures used. Quantification of the immobilisation efficiency of lipase on several supports through UV/visible methods and sampling methods used to obtain correct enzymatic activity values are specifically analysed. After a brief review which demonstrates the big discrepancies found in the literature, original data from Candida rugosa lipase adsorption on polypropylene powder and its use in the solvent-free synthesis of ethyl oleate are introduced in order to exemplify the difficulties found in these kinds of systems. Several procedures described in the literature are assayed and the accuracy of the results obtained is carefully analysed. The aim of the whole analysis performed is that it would be useful for any powdered solid to be used as a support for a lipase in a solvent-free system for any synthesis reaction, especially for those involving a volatile reagent. Throughout this contribution, special emphasis is placed on how catalytic reaction results using enzymes (free and immobilised) are reported so as to allow comparison between published data, something which is usually difficult since very different units are used and often complementary data are not included.     

Estimation scheme for level-dependent uncertainty of analytical result: application for determination of 1-hydroxypyrene in urine

The estimation scheme of uncertainty of determination of 1-hydroxypyrene (1-OHP) in urine was developed analysing the main stages of the analytical procedure: (1) preparation of 1-OHP standards, (2) creation of the calibration curve for the high performance liquid chromatography (HPLC) analysis method with the evaluation of recovery, (3) measuring procedure of aliquot of urine, (4) adjusting the pH of aliquot and hydrolysis with enzyme, (5) solid phase extraction, (6) concentration of the extract, (7) injection of the extract to chromatograph and analysing by the HPLC method, (8) calculation of 1-OHP mass from the calibration curve, (9) calculation of 1-OHP concentration in urine. The evaluation of the uncertainty is based on quantification of individual components. Combined uncertainty was calculated using the law of propagation of uncertainties according to the EURACHEM/CITAC guidelines. Level dependence of the uncertainty arises from the calibration curve. The limits of detection and quantification were found to be equal to 0.03 and 0.1 ng/mL, respectively. The calculated expanded level-dependent uncertainty covers 47–27–25% within the concentration range 0.03–0.1–0.4 ng/mL with the materials and equipment used. These parameters could easily be recalculated according to the proposed scheme if there are some changes in the analysis procedure.     

The hydration of sodium dehydrocholate micelles

The hydration of micellised sodium dehydrocholate molecules was determined by viscosity measurements. It was found that there are 39 water molecules for each micellised surfactant molecule. About ten water molecules may be attributed to the hydration of the sodium carboxylate group. By assignation of two water molecules to each of the three carbonyl groups, the total hydration of a micellised sodium dehydrocholate molecule was estimated as about 16 water molecules. The remaining 23 water molecules per micellised sodium dehydrocholate molecule may be attributed to water trapped in the structure of micelles.     

The polysaccharide extracts from the fungi Coprinus comatus and Coprinellus truncorum do exhibit AChE inhibitory activity

The polysaccharide (PSH) extracts from the edible mushroom species Coprinus comatus and Coprinellus truncorum were screened in liquid for their acetylcholinesterase inhibitory (AChE) activity. Both extracts were found to display inhibition of the aforementioned enzyme reaching similar IC₅₀ values of 0.62 ± 0.07 and 0.61 ± 0.03 mg/mL, respectively. According to the means of FTIR spectroscopy, these PSH extracts mostly contained β-glucans. However, the presence of some proteins and polyphenolics as minor ingredients were also detected. Compared with existing literature data for anti-AChE activity of the sugar samples, the findings within this study may be treated as a profound bioactivity. Consequently, this study puts some light on the possible use of the screened macrofungi in the palliative treatment of Alzheimer’s disease.     

Synthesis and properties of 1-(6-methoxy)-2-benzothiazolyl)-2-pyridones

Substituted ]-(6-methoxy-2-benzothiazolyt)-2-pyridones were prepared from 2-amino-6-methoxybenzathiazate through N-(6-methoxy-2-benzothiazotyl) cyanvorearmileaznd-3-aryl-N-(6-methoxy-2-benzothiazolyt)-2-cyano-2-propenamides. The cyclization of the latter with malonodinitrile in the presence of piperidine gave the corresponding pyridones. The structures of the synthesized compounds were confirmed by¹H NMR and mass spectral data.Department of Organic Chemistry, Mass Spectrometry Laboratory, Slovak Technical University, 812 37 Bratislava, Slovakia. Published in Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1402–1404, October, 1995. Original article submitted August 24, 1995.     

Zur Kenntnis der thermischen Zersetzung von Ammoniumhexafluoroscandat,-titanat,-vanadat und-chromat

Thermal analysis supported by kinetic calculations was applied exhaustively to these compounds. Under dynamic conditions, tetrafluorometallates(III), which as intermediates, could not be isolated, for the first three compounds. In each case, the final step was the pure metal(III) fluoride. Ammonium hexafluorochromate(III) decomposed directly to the pure chromium(III) fluoride. The decomposition rate of all compounds slowed down towards the end, probably for kinetic reasons. Polymorphic transitions of ammonium hexafluorotitanate(III) were observed at 35 and 100°C. Ammoniumhexafluoroscandate(III) underwent polymorphic transition at 47°C. The decomposition patterns for all these compounds were similar. Conditions for the preparation of pure ammonium tetrafluorometallates(III) of Sc, Ti and V are described.