Pressure effect on grain boundary wetting at various temperatures

Bicrystals of Fe-6 at.% Si alloy containing <001> 5 tilt grain boundaries with a deposited zinc layer have been annealed at various hydrostatic pressure at four temperatures between 700° and 905°C. After the anneals the dihedral angle of the grain boundary groove formed at the site of the grain boundary intersection with the solid-melt interphase boundary has been measured. The transition from complete to incomplete wetting of the grain boundary by the zinc-rich melt (dewetting phase transition) has been found to occur as the pressure increased at all temperatures studied. The temperature dependence of the dewetting transition pressure p _w has been determined. That dependence has a minimum at a temperature of 790°C, which is close to the peritectic temperature in the Fe–Zn system (782°C). A thermodynamic analysis of the wetting phenomena in the two-component system, based on Becker's regular solution model for the surface tension of the interphase boundary, explains the minimum in the p _w (T) dependence.     

Atom-transfer radical polymerization of poly(ethylene oxide) macromonomers in aqueous media

Soluble comb-shaped and swelling network polymers based on monomethacrylate (M = 2080) and bismethacrylate (M = 4000) poly(ethylene oxide) macromonomers, have been synthesized by the controlled atom-transfer radical polymerization in aqueous media. PEG 2000 methyl ether ethyl-2-bromoisobutyrate and 2-bromoisobutyrate, in combination with CuBr, CuBr₂, and 2,2′-bipyridyl, have been used as initiators. The length of the main chain of comb-shaped polymers, as estimated with multidetector chromatography, is in good agreement with the calculated values in the 15–20 range at M _w /M _n = 1.42–1.89. The polymerization of the methacrylate macromonomer proceeds at a high rate and with a nearly quantitative conversion. The replacement of 10–80 mol % CuBr with CuBr₂ appreciably decelerates polymerization and decreases polydispersity to 1.14–1.21, while the experimental and calculated values of chain lengths remain equal. This finding indicates a higher level of process control. The polymer networks thus prepared manifest Gaussian elastic behavior, as is evident from the relationship between the elastic modulus G and the swelling degree Q that is consistent with the classical prediction G ～ Q ^m , where m = ?1/3. Within the framework of the accepted model of networks of this type, this fact suggests the short length of polymethacrylate chains. In addition, the relationship between the time of attainment of the gelation point and the composition of the initiation system agrees with the atomtransfer controlled polymerization mechanism. The efficiencies of various radical polymerization methods for controlling the network structure are compared.     

Electroanalysis of Norepinephrine at Bare Gold Electrode Pure and Modified with Gold Nanoparticles and S‐Functionalized Self‐Assembled Layers in Aqueous Solution

Gold nanoparticles (Au‐NPs), cystamine (CA) and 3,3′‐dithiodipropionic acid (DTDPA) modified gold bare electrodes were applied in voltammetric sensors for simultaneous detection of norepinephrine (NEP), ascorbic (AA) and uric (UA) acids. A linear relationship between norepinephrine concentration and current response was obtained in the range of 0.1 μM to 600 μM M with the detection limit ≤0.091 μM for the electrodes modified at 2D template and in the range of 0.1 μM to 700 μM M with the detection limit ≤0.087 μM for the electrodes modified at 3D template The results have shown that using modified electrodes it is possible to perform electrochemical analysis of norepinephrine without interference of ascorbic and uric acids, whose presence is the major limitation in norepinephrine determination at a bare gold electrode. The modified SAMs electrodes show good selectivity, sensitivity, reproducibility and high stability.     

Model studies of the optical rotation,and theoretical determination of its sign for β‐pinene and trans‐pinane

We have carried out extensive studies on the basis set dependence of the calculated specific optical rotation (OR) in molecules at the level of the time–dependent Hartree–Fock and density functional approximations. To reach the limits of the basis set saturation, we have devised an artificial model, the asymmetrically deformed (chiral) methane (CM) molecule. This small system permits to use basis sets which are prohibitively large for real chiral molecules and yet shows all the important features of the basis set dependence of the OR values. The convergence of the OR has been studied with n‐aug‐cc‐pVXZ basis sets of Dunning up to the 6–ζ. In a parallel series of calculations, we have used the recently developed large polarized (LPolX) basis sets. The relatively small LPolX sets have been shown to be competitive to very large n‐aug‐cc‐pVXZ basis sets. The conclusions reached in calculations of OR in CM concerning the usefulness of LPolX basis sets have been further tested on (S)‐methyloxirane and (S)‐fluoro‐oxirane. The smallest set of the LPolX family (LPol–ds) has been found to yield OR values of similar quality as those obtained with much larger Dunning's aug‐cc‐pVQZ basis set. These results have encouraged us to carry out the OR calculations with LPol–ds basis sets for systems as large as β‐pinene and trans‐pinane. In both cases, our calculations have lead to the correct sign of the OR value in these molecules. This makes the relatively small LPol–ds basis sets likely to be useful in OR calculations for large molecules. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

Stability of Ibuprofen in its Inclusion Complex with β-Cyclodextrin

The ibuprofen--cyclodextrin inclusion complex was prepared by theco-precipitation method. The identity of the obtained product was verified by X-ray and thermogravimetric techniques. The effect of -cyclodextrin on the stability of ibuprofen was analysed.     

Revisiting Thin-Layer Chromatography as a Lipophilicity Determination Tool. Part III — A Study on CN Adsorbent Layers

JPC – Journal of Planar Chromatography – Modern TLC -     

On the relation between the solvent parameters and the physical properties of methyl-4,6-O-benzylidene-α-d-glucopyranoside organogels

This paper reports the mechanisms of gel formation, the thermal properties and the microstructures of the networks of the gels composed of methyl-4,6-O-benzylidene-α-d-glucopyranoside and selected organic solvents: p-xylene, benzene, toluene, diphenyl ether and tetraethoxysilane. The Fourier transform infrared measurements together with simulation spectra, the air bath method and Polarized Optical Microscopy were employed in our studies. The experimental data show that the solvent has an influence on the microstructure of the gel network but there is no predictable influence of the solvent polarity on the shape of the formed gelator aggregates and correspondingly on the fibrous assemblies as revealed by the different microstructure of the gel network. Independently of the solvent polarity, the studied gelator, like other methyl-4,6-O-benzylidene derivatives of monosaccharides, formed gels through the formation of a hydrogen-bond network. The solvent parameters, such as the dielectric constant, Hildebrand solubility parameter, the polarity scale E_T and the Kamlet–Taft parameters were considered to quantify solvent effects on the gelation. The conclusions about the correlations are of interest but only to this particular sugar based gels.     

Inorganic Sol-Gel Preparation of Medium Sized Microparticles of Li2TiO3 from TiCl4 as Tritium Breeding Material for Fusion Reactors

Microspheres of Li₂TiO₃ were fabricated by a classical, inorganic sol-gel process from commercially available TiCl₄. Elaborated process consists of the following main steps: (1) dissolving of TiCl₄ in concentrated aqueous HCl and addition of LiOH; (2) formation of sol emulsion in 2-ethylhexanol-1 containing the surfactant SPAN-80 (EH); (3) gelation of emulsion drops by extraction of water with partially dehydrated EH; (4) impregnation of gel to Li:Ti molar ratio MR = 2; (5) thermal treatment at 1200°C in order to receive chloride free product. This temperature can be significantly lowered (to 750°C) by dechlorination starting solution TiCl₄ by chemical treatment of the with nitric acid to form of nitrate-stabilized titania sols. Tritium release from sol-gel made Li₂TiO₃ microspheres were found very close to that observed for other traditional materials, however for the first sample process starts slightly earlier.     

Hydrogen‐Bonding in Aminocatalysis: From Proline and Beyond

This Concept article summarizes recent progress in the field of hydrogen‐bonding aminocatalysis using proline‐derived systems. The aminocatalysts available in the literature are categorized by the incorporated hydrogen‐bonding scaffold and its mode of recognition. Both mono‐ and double‐hydrogen‐bonding motifs are discussed and examples of their application in asymmetric synthesis are given.     

Calorimetry in testing waste materials from the brown coal combustion

The calorimetric measurements were applied in testing the wastes collected from different furnaces in electric power plants as materials to be used in civil engineering. The fly ash materials were collected from two power stations based on different brown coal deposits and working with conventional and fluidized bed installation. The reactivity of high calcium fly ash from sub-bituminous coal combustion has been proved in calorimetric, conductometric, chemical shrinkage, and rheological measurements before their practical implementation on larger scale. Highly soluble components of fly ash contribute to the hydration products and structure formation, followed by setting and hardening of fly ash–cement mixture. These results have been the base of research project aimed in the innovative solutions dealing with the management of deposits of wastes generated as a result of coal combustion. The standardization and potential use on larger scale of these materials, necessary from the environmental point of view, seems to be the question of nearest future.