Numerical analysis of transient laminar forced convection of nanofluids in circular ducts

In this study, forced convection heat transfer characteristics of nanofluids are investigated by numerical analysis of incompressible transient laminar flow in a circular duct under step change in wall temperature and wall heat flux. The thermal responses of the system are obtained by solving energy equation under both transient and steady-state conditions for hydro-dynamically fully-developed flow. In the analyses, temperature dependent thermo-physical properties are also considered. In the numerical analysis, Al₂O₃/water nanofluid is assumed as a homogenous single-phase fluid. For the effective thermal conductivity of nanofluids, Hamilton–Crosser model is used together with a model for Brownian motion in the analysis which takes the effects of temperature and the particle diameter into account. Temperature distributions across the tube for a step jump of wall temperature and also wall heat flux are obtained for various times during the transient calculations at a given location for a constant value of Peclet number and a particle diameter. Variations of thermal conductivity in turn, heat transfer enhancement is obtained at various times as a function of nanoparticle volume fractions, at a given nanoparticle diameter and Peclet number. The results are given under transient and steady-state conditions; steady-state conditions are obtained at larger times and enhancements are found by comparison to the base fluid heat transfer coefficient under the same conditions.     

Energy expressions and free vibration analysis of a rotating Timoshenko beam featuring bending�Cbending-torsion coupling

In this study, free vibration analysis of a uniform, rotating, cantilever Timoshenko beam featuring bending?Cbending-torsion coupling is performed. To the best of the authors?? knowledge, there is no explicit formulation in open literature for rotating Timoshenko beams featuring bending?Cbending-torsion coupling. Therefore, in this study, derivation of the kinetic and the potential energy expressions for the mentioned beam model is carried out in a detailed way by using several explanatory tables and figures. The parameters for the hub radius, rotational speed, rotary inertia, shear deformation and bending?Cbending-torsion coupling are incorporated into the energy expressions. The governing differential equations of motion are obtained by applying the Hamilton??s principle to the derived energy expressions and solved using an efficient mathematical technique, called the differential transform method. The natural frequencies are calculated, and comparisons are made with the results in open literature. Consequently, it is observed that there is a good agreement between the results, which validates the accuracy of the derived formulation and the built beam model.     

New N,S-Derivatives of Nitrodienes from Thioallyl-and Thiodibromopropyl Nitrodienes

Compound 3 and 5a, b were obtained from the reaction of 1,3,4,4-tetrachloro-1-thioallyl-2-nitro-1,3-butadiene (1) with thiomorpholine (2) and piperazine derivatives 4a, b in dichloromethane. The reaction of compound 1 and bromine gave compound 6. Compounds 8 and 10 were obtained from the reaction of 6 with 1-(diphenylmethyl)piperazine (7) and piperidine (9) in dichloromethane. The derivative 13 was synthesized from the reaction of 4-bromo-1,1,3,4-tetrachloro-2-nitro-1,3-butadiene (11) and allylmercaptane (12). Compounds 15 and 16a, b were obtained from the reaction of 1-allyl-4-bromo-1,3,4-trichloro-2-nitro-1,3-butadiene (13) with morpholine (14) and the piperazine derivatives 16a, b, in dichloromethane, respectively.     

Spectroscopic Characterization of <Emphasis Type="Italic">N,N-bis</Emphasis>(2-{[(2,2-Dimethyl-1,3-Dioxolan-4-yl)Methyl]Amino}Ethyl) N′,N′-Dihydroxyethanediimidamide and Its Complexes

A new dioxime ligand, N,N-bis(2-{[(2,2-dimethyl-1,3-dioxolan-4-yl)methyl]amino} ethyl)N′,N′-dihydroxyethanediimidamide (H₂L), and its mononuclear complexes with Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Cd²⁺ are synthesized. H₂L forms transition metal complexes [Co(LH)₂(H₂O)₂] and [M(LH)₂] (M = Ni²⁺, Cu²⁺) with a metal : ligand ratio of 1 : 2. Complexes [M(H₂L)(Cl)₂] (Zn²⁺, Cd²⁺) have a metal : ligand ratio of 1 : 1. The mononuclear Co²⁺, Ni²⁺, and Cu²⁺ complexes indicate that the metal ions coordinate ligand through its two N atoms, as the most of dioximes. In the Co²⁺ complex, two water molecules and in the Zn²⁺ and Cd²⁺ complexes two chloride ions are also coordinated to the metal ion. The structures of these compounds are identified by elemental analyses, IR, ¹H and ¹³C NMR, electronic spectra, magnetic susceptibility measurements, conductivity, and thermogravimetric analysis.__________From Koordinatsionnaya Khimiya, Vol. 31, No. 7, 2005, pp. 540–544.Original English Text Copyright © 2005 by Canpolat, Kaya.The text was submitted by the authors in English.     

Synthesis and evaluation of new pyrazoline‐thiazole derivatives as monoamine oxidase inhibitors

A novel series of 1,3,5‐trisubstituted‐2‐pyrazoline derivatives ( 4a ‐ 4k ) was synthesized and their chemical structures characterized by ¹H NMR, ¹³C NMR, and mass spectroscopy. These compounds were evaluated as inhibitors for of type A and type B monoamine oxidase (MAO) enzymes. The most common inhibitors of MAO enzymes used to treat depression and anxiety such as selegiline and moclobemide drugs were used as reference agents. A result of biological evaluation of these compounds revealed compounds 4c , 4d , and 4? as potent and selective MAO A inhibitors. The most active compound 4? , which is 2,4‐dimethoxy at phenyl ring, showed strong inhibitory activity at MAO A (IC₅₀ of 0.0445 ± 0.0018μM). Furthermore, compounds 4c and 4d showed significant inhibition profile on MAO A with the IC₅₀ values 0.1423 ± 0.0051μM and 0.2148 ± 0.0067μM, respectively.     

Determination of ultra trace arsenic species in water samples by hydride generation atomic absorption spectrometry after cloud point extraction

Cloud point extraction (CPE) methodology has successfully been employed for the preconcentration of ultra-trace arsenic species in aqueous samples prior to hydride generation atomic absorption spectrometry (HGAAS). As(III) has formed an ion-pairing complex with Pyronine B in presence of sodium dodecyl sulfate (SDS) at pH 10.0 and extracted into the non-ionic surfactant, polyethylene glycol tert-octylphenyl ether (Triton X-114). After phase separation, the surfactant-rich phase was diluted with 2 mL of 1 M HCl and 0.5 mL of 3.0% (w/v) Antifoam A. Under the optimized conditions, a preconcentration factor of 60 and a detection limit of 0.008 μg L⁻¹ with a correlation coefficient of 0.9918 was obtained with a calibration curve in the range of 0.03–4.00 μg L⁻¹. The proposed preconcentration procedure was successfully applied to the determination of As(III) ions in certified standard water samples (TMDA-53.3 and NIST 1643e, a low level fortified standard for trace elements) and some real samples including natural drinking water and tap water samples.     

Development of an inexpensive and sensitive method for the determination of low quantity of arsenic species in water samples by CPE-FAAS

The simple and rapid preconcentration technique using cloud point extraction (CPE) was applied for the determination of As(V) and total inorganic arsenic (As(V) plus As(III)) in water samples by means of FAAS. As(V) has formed an ion-pairing complex with Pyronine B in the presence of cetyl pyridinium chloride (CPC) at pH 8.0 and extracted into the non-ionic surfactant Triton X-114, after centrifugation the surfactant-rich phase was separated and diluted with 1.0 mol L⁻¹ HNO₃ in methanol. The proposed method is very versatile and economic because it exclusively used conventional FAAS. After optimization of the CPE conditions, a preconcentration factor of 120, the detection and quantification limits of 1.67 and 5.06 μg L⁻¹ with a correlation coefficient of 0.9978 were obtained from the calibration curve constructed in the range of 5.0-2200 μg L⁻¹. The relative standard deviation, RSD as a measure of precision was less than 4.1% and the recoveries were in the range of 98.2-102.4%, 97.4-101.2% and 97.8-101.1% for As(V), As(III) and total As, respectively. The method was validated by the analysis of standard reference materials, TMDA-53.3 and NIST 1643e and applied to the determination of As(III) and As(V) in some real samples including natural drinking water and tap water samples with satisfactory results. The results obtained (34.70 ± 1.08 μg L⁻¹ and 60.25 ± 1.07 μg L⁻¹) were in good agreement with the certified values (34.20 ± 1.38 μg L⁻¹ and 60.45 ± 1.78 μg L⁻¹).     

Synthesis and characterization of a new dyestuff polymer soluble in alkaline aqueous media

Novel dyestuff polymers were successfully obtained through oxidative polymerization technique. The synthesized Schiff base and its polymer were soluble in alkaline＇aqueous medium and they have various colors in different solutions. Also, it can be said that the synthesized compounds are suitable as coloring agent （dyestuff） for textile applications. Fluorescence properties of the compounds were determined in DMF with different concentrations （mg/L）. Poly-tris（4- aminophenyl）methanol （P-TAPM） has quite high emission and excitation intensity values. Optical and electrochemical band gaps of the polymers were lower than those of the monomers indicating the more conjugated structure of the polymers. The oxidized states of the novel dyestuff compounds were examined by cyclic voltammetry （CV） technique. The solid state conductivity measurements showed that the synthesized polymers were semiconductors when exposed to the iodine vapour their conductivities could be increased. P-TAPM had the highest undoped conductivity. Thermal characterizations of the synthesized compounds were carried out by TG-DTA and DSC methods.     

Square wave voltammetric determination of diafenthiuron and its application to water,soil and insecticide formulation

A square wave cathodic stripping voltammetric (SWCSV) method has been developed for the determination of insecticide diafenthiuron. The procedure is based on controlled accumulation of the insecticide on a static hanging mercury drop electrode (SHMDE) at 0.00?mV (vs. Ag/AgCl) in Britton-Robinson buffer solution (pH 7.0). The insoluble mercury compound was reduced at ?510?mV during the cathodic potential scan. The peak currents were linearly related to insecticide concentration between 30.4 and 3200?µg?L^?1 . The detection and quantification limit were 9.1?µg?L^?1 and 30.4?µg?L^?1, respectively. The proposed analytical procedure was applied to natural water and soil samples. The method was extended to direct determination of diafenthiuron in insecticide formulation Polo® 50 WP and average content of 50.3?±?1.7 (m/m) at 90% confidence level, in close agreement with the 50.0% quoted by the manufacturer. HPLC comparison method indicated that accuracy was in agreement with that obtained by the proposed method.