Synthesis, characterization, thermal and optical properties of styrene derivatives having pendant p-substituted benzylic ether groups

The derivatives of styrene monomer, 4-chlorophenyl-4-vinylbenzyl ether (M1), 4-methoxyphenyl-4-vinylbenzyl ether (M2), 4-ethylphenyl-4-vinylbenzyl ether (M3) and 1-naphtylphenyl-4-vinylbenzyl ether (M4) were synthesized. The normal free radical polymerization of monomers in 1,4-dioxane were performed by using 2,2′-azobisisobutyronitrile as an initiator at 65 °C. The monomers and their homopolymers were characterized by FT-IR, NMR and elemental analyses measurements. The thermal stability of polymers was investigated by thermogravimetric and differential scanning calorimetric analysis. Thermal degradation activation energies of the polymers were calculated by the Ozawa and Kissinger methods. In addition, photo-stability tests of the polymers under near-UV irradiation were performed.     

Investigation of Some Functionalization Reactions of 4‐Benzoyl‐5‐phenyl‐1‐(4‐methoxyphenyl)‐1H‐pyrazole‐3‐carbonyl Chloride and Their Antimicrobial Activity

The 1H‐pyrazole‐3‐carboxylic acid 1 was converted via reactions of its acid chloride 3 with various asymmetrical disubstituted urea and alcohol derivatives into the corresponding novel 4‐benzoyl‐N‐(N′,N′‐dialkylcarbamyl)‐1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐pyrazole‐3‐carboxamide 4a , b and alkyl 4‐benzoyl‐1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐pyrazole‐3‐carboxylate 7a‐c , respectively, in good yields (57%‐78%). Friedel‐Crafts reactions of 3 with aromatic compouns for 15 min.‐2 h led to the formation of the 4‐3‐diaroyl‐1‐(4‐hydroxyphenyl)‐5‐phenyl‐1H‐pyrazoles 9a‐c , 4‐benzoyl‐1‐(4‐methoxyphenyl)‐3‐aroyl‐5‐phenyl‐1H‐pyrazoles 10a , b and than from the acylation reactions of 9a‐c were obtained the 3,4‐diaroyl‐1‐(4‐acyloxyphenyl)‐5‐phenyl‐1H‐pyrazoles 13a‐d . The structures of all new synthesized compounds were established by NMR experiments such as ¹H, and ¹³C, as well as 2D COSY and IR spectroscopic data, and elemental analyses. All the compounds were evaluated for their antimicrobial activities (agar diffusion method) against eight bacteria and two yeasts.     

Synthesis and characterization of new 4,5-dihydropyrazol-1-yl derivatives

In this study, first, a series of chalcone compounds S1–S6 were synthesized from various acetophenone derivatives (acetophenone, p-methyl acetophenone, and p-methoxy acetophenone) and aromatic aldehyde derivatives (benzaldehyde, p-methyl benzaldehyde, and p-methoxy benzaldehyde) by the Claisen–Schmidt condensation reaction. These S1–S6 compounds were then used in the preparation of 4,5-dihydropyrazol-1-yl derivatives S7–S15. Finally, four new compounds S16–S19 were synthesized from compound (S7, S8, S9, and S12) and 2,4-dinitrophenylhydrazine. Therefore, three known and ten new heterocyclic compounds were synthesized and completely characterized using ¹H NMR, ¹³C NMR, IR, and elemental analysis.     

Synthesis, characterization and some properties of epoxy resins containing azomethine bonding

New epoxy resins were prepared from hydroxyl substituted Schiff base monomers in two steps. The first step is based on the synthesis of hydroxyl substituted Schiff base monomers via condensation reaction. The second step includes the reaction between Schiff base monomers with epichlorohydrine (EPC) to obtain epoxy resins. The structures of resulting compounds were confirmed by FTIR and ¹H-NMR. TG-DTA and DSC measurements were made for thermal characterizations of the compounds. Chemical resistances of the cured epoxy-amine systems in acidic, alkaline and organic solvents were determined for coating applications. HCl (aqueous solution, 10%), NaOH (aqueous solution, 10%), DMSO, DMF, N-methylpyrrolidone, ethanol, THF and acetone were used for corrosion tests. Chemical resistance data show that the synthesized resins have good chemical resistance against various acid, alkaline and common organic solvents.     

Investigation of metal activation of a partially purified polyphenol oxidase enzyme electrode

Biosensors can be developed using different biological materials and immobilization technologies. Enzymes are generally used in biosensor construction, and some enzymes need metal ions or small organic molecules as a cofactor for their activation. Polyphenol oxidases can be activated by several metal ions such as Cu²⁺, Mg²⁺, Zn²⁺, Mn²⁺, and Ni²⁺. In this study, a new measurement method has been developed that is based on the metal ion activation of the polyphenol oxidase enzyme used in the biosensor preparation, especially to determine the concentration of Mg²⁺ ions. Polyphenol oxidase (PPO) (EC 1.10.3.1) was partially purified from potato (Solanum tuberosum) by using (NH₄)₂SO₄ precipitation, dialysis, and lyophylization processes. As a result of this processes, approximately 30-fold purification was achieved for PPO. For construction of the biosensor, the enzyme was immobilized on the dissolved oxygen probe membrane using gelatin and glutaraldehyde (2.5%). Using the biosensor, we obtained responses for catechol in the absence and presence of Mg²⁺ ions. Differences between the biosensor responses were related to the concentration of Mg²⁺ ions. The biosensor response depends linearly on concentration of Mg²⁺ ions between 0.05 and 7.5?mM. In the optimization studies, phosphate buffer (pH 7.0, 50?mM) and 35°C were determined to be the optimum conditions. This project will be a novel biosensor study and it might bring a new term, ‘activation based biosensor’ into the biosensor area.     

The first use of [PdBr2(imidazolidin-2-ylidene)(pyridine)] catalysts in the direct C-H bond arylation of C2-substituted furan and thiophene

Research on Chemical Intermediates - N-Heterocyclic carbene (NHC)-linked PEPPSI-type palladium complexes have recently been used in the direct C-H bond arylation of heteroarenes. However, in most...     

Nafion-graphene composite film modified glassy carbon electrode for voltammetric determination of p-aminophenol

A Nafion-graphene (Nafion-GR) nanocomposite film modified glassy carbon electrode was fabricated by a simple drop-casting method, and used in the electrochemical detection of p-aminophenol (4-AP). Owing to the large surface area, good conductivity of GR and good affinity of Nafion, the sensor exhibited excellent electrocatalytic activity for the oxidation of 4-AP. The electrochemical behaviors of 4-AP on Nafion/GR film modified glassy carbon electrodes were investigated by cyclic voltammetry and differential pulse voltammetry. A calibration curve is constructed in the same matrix, urine, as the unknown samples to be analyzed. The Nafion-GR film modified electrode was linearly dependent on the 4-AP concentration and the linear analytical curve was obtained in the ranges of 0.5–200 μM with differential pulse voltammetry (DPV) and the detection limit was 0.051 μM. The Nafion-graphene nanocomposite modified electrode exhibited good reusability than pure graphene modified GCE. This procedure can be used for the determination of p-aminophenol in the presence of its degradation products and paracetamol. Finally, the proposed method was successfully used to determine p-aminophenol in local tap water samples in urine samples and pharmaceutical preparations.     

Dyeing of cotton with thyme and pomegranate peel

Application of natural dyes for textiles is increasing due to awareness of environment, ecology, and pollution control. The purpose of this study is to determine the color, antimicrobial, and fastness properties of cotton fabrics dyed with thyme and pomegranate peel without a mordanting process. In this way, it was planned to avoid use of metallic mordants (heavy-metal salts) and prevent heavy-metal pollution for ecological production. Additionally, a variety of the most commonly used mordants, namely potassium aluminum sulfate, copper(II) sulfate, iron(II) sulfate, and tin(II) chloride, were used for mordanting of cotton fabrics in order to compare the differently mordanted and unmordanted dyed fabrics’ color efficiencies (K/S) and CIE L ^* a ^* b ^* color values. It was found that mordant type had an effect on color efficiency and the color coordinates of fabrics dyed with both thyme and pomegranate fruit peel. Moreover, the antimicrobial properties of the fabrics only dyed directly with thyme and pomegranate peel without any mordanting process were determined to demonstrate the usability of these natural dye sources without use of any mordanting agents. The obtained antimicrobial activities were compared with undyed samples. Undyed samples showed no antimicrobial activity, whereas significant antimicrobial activity was obtained after the dyeing procedure using thyme and pomegranate peel on unmordanted fabrics. Washing, rubbing, perspiration, and lightfastness properties of dyed fabrics were also evaluated. Thyme and pomegranate fruit peel as natural dye sources revealed sufficient results even for unmordanted samples.     

An experimental and theoretical approach to the molecular structure of 3‐{[4‐(3‐Methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐hydrazono}‐1,3‐dihydro‐ indol‐2‐one

The title molecule, 3‐{[4‐(3‐methyl‐3‐phenyl‐cyclobutyl)‐thiazol‐2‐yl]‐hydrazono}‐1,3‐dihydro‐indol‐2‐one (C₂₂H₂₀N₄O₁S₁), was prepared and characterized by ¹H NMR, ¹³C NMR, IR, UV–visible, and single‐crystal X‐ray diffraction. The compound crystallizes in the monoclinic space group P21 with a = 8.3401(5), b = 5.6976(3), c = 20.8155(14) Å, and β = 95.144(5)°. Molecular geometry from X‐ray experiment and vibrational frequencies of the title compound in the ground state has been calculated using the Hartree–Fock with 6‐31G(d, p) and density functional method (B3LYP) with 6‐31G(d, p) and 6‐311G(d, p) basis sets, and compared with the experimental data. The calculated results show that optimized geometries can well reproduce the crystal structural parameters, and the theoretical vibrational frequencies values show good agreement with experimental data. Density functional theory calculations of the title compound and thermodynamic properties were performed at B3LYP/6‐31G(d, p) level of theory. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012