N,S-Substituted Dienes from Mono(arylthio)substituted- and S-, S,S-Substituted Dienes

Mono(thio)substituted dienes 1a-1b gave compounds 3a-c and 5d-g with piperazine and piperidine derivatives in dichloromethane. Compounds 8 , 9 , and 10 were obtained from the reactions of perchlorobutadiene ( 6 ) with 1,4-butanedithiol ( 7 ) in ethanol in the presence of sodium hydroxide. Compounds 12a-b , 13a-b were obtained from the reactions of perchlorobutadiene ( 6 ) with allylmercaptan (CH 2 =CH--CH 2 --SH) and mercaptoethanol (HO--CH 2 --CH 2 --SH).     

Einige Neue N,S-Substituierte 2-Nitrodienverbindungen Aus Reaktionen Von Mono(p-fluorarylthio)substituierten Dienen Mit Aminen

2-Nitrodiene compound 1 was stirred with p-fluorothiophenol for a long time and compound 3 was obtained. Compound 1 gave bis(thio)substituted 2-nitrodiene compound 4 and tris(thio)substituted compound 5 with 2 moles of p-fluorothiophenol in the presence of NaOH in ethanol. The compounds 9a–g have been prepared from 8a–g and 3. Compound 7 was obtained from the reaction of mono(thio)substituted 2-nitrodiene with morpholine. Compound 3 gives 11a–d in the reaction with piperidines in CH₂Cl₂ (or ether). Compound 13a–b have been obtained from the reaction of compound 3 with primary amines 12a–b. Compound 3 gives 15 and 16 in the reaction with 2,5-dimethylpiperazine in CH₂Cl₂.

     

Swelling Characterization of the Superabsorbent Copolymer in the Petroleum-Based Solvent-Water Mixtures

The crosslinked and porous copolymer grains were synthesized by inverse suspension polymerization of acrylamide. The synthesized copolymer was characterized by Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). It was achieved to absorbed 418 g water by 1 g copolymer after 5 min waiting time. Moreover, it was seen that about 99% of water was absorbed by 1 g copolymer in the solvent water mixtures (300 mL solvent–200 mL distilled water) after 2.5 min waiting time. The diffusion coefficients of the copolymer in the solvent-water mixtures were found between 8.87 · 10⁴ and 10.64 · 10⁴ cm²s^?1. Furthermore, the copolymer in distilled water achieved to reach a high value of the diffusion coefficient (13.2 · 10⁴ cm²s^?1).     

Synthesis and Metal Ion Recognition Properties of a Novel Chiral Calix[4](azoxa)crown-7

A novel chiral calix[4](azoxa)crown-7 (9) has been synthesized and its metal ion recognition properties investigated. The starting reagents, chiral diamine 5 and calix[4]arene diacid chloride derivative 8, were prepared according to literature methods. ¹H and ¹³C NMR data show that 9 exists in a cone conformation. In liquid–liquid extraction experiments, 9 exhibits selectivity for Li⁺ among the other alkali metals and a good extraction ability for transition metal cations, suggesting its potential use in different fields, such as a sensor for ions as well as for chiral molecules.     

Synthesis, characterization, thermal and optical properties of styrene derivatives having pendant p-substituted benzylic ether groups

The derivatives of styrene monomer, 4-chlorophenyl-4-vinylbenzyl ether (M1), 4-methoxyphenyl-4-vinylbenzyl ether (M2), 4-ethylphenyl-4-vinylbenzyl ether (M3) and 1-naphtylphenyl-4-vinylbenzyl ether (M4) were synthesized. The normal free radical polymerization of monomers in 1,4-dioxane were performed by using 2,2′-azobisisobutyronitrile as an initiator at 65 °C. The monomers and their homopolymers were characterized by FT-IR, NMR and elemental analyses measurements. The thermal stability of polymers was investigated by thermogravimetric and differential scanning calorimetric analysis. Thermal degradation activation energies of the polymers were calculated by the Ozawa and Kissinger methods. In addition, photo-stability tests of the polymers under near-UV irradiation were performed.     

A Sensitive and Selective RP-LC Method for the Simultaneous Determination of the Antihypertensive Drugs,Enalapril, Lercanidipine,Nitrendipine and Their Validation

A RP-LC method is presented, which is sensitive and selective for the simultaneous determination of enalapril–lercanidipine and enalapril–nitrendipine binary mixtures in their pharmaceutical dosage forms. The analyte peaks were detected using the LC method with the mobile phase ratio of methanol: water (70:30 v/v, pH 3.0) and a 1.0 mL min⁻¹ flow rate. The detection wavelength was selected at 210 nm using photo diode array detector and column temperature was optimized to 30 °C. Linearity was obtained at different concentration ranges for all working pharmaceutically active compounds between 0.5 and 25 μg mL⁻¹. The proposed methods were extensively validated according to USP 27 requirements and ICH guidelines. The methods were applied to the analysis of pharmaceutical dosage forms containing binary mixtures of enalapril–lercanidipine and enalapril–nitrendipine. Moreover, the proposed methods were applied for the degradation studies of the selected compounds. Degradation studies were conducted using stress conditions such as UV light, acidic and alkaline hydrolysis, oxidation and heat in oven, to evaluate the ability of the separation of the response of standard compounds from their degradation products.

     

Synthesis and characterization of new 4,5-dihydropyrazol-1-yl derivatives

In this study, first, a series of chalcone compounds S1–S6 were synthesized from various acetophenone derivatives (acetophenone, p-methyl acetophenone, and p-methoxy acetophenone) and aromatic aldehyde derivatives (benzaldehyde, p-methyl benzaldehyde, and p-methoxy benzaldehyde) by the Claisen–Schmidt condensation reaction. These S1–S6 compounds were then used in the preparation of 4,5-dihydropyrazol-1-yl derivatives S7–S15. Finally, four new compounds S16–S19 were synthesized from compound (S7, S8, S9, and S12) and 2,4-dinitrophenylhydrazine. Therefore, three known and ten new heterocyclic compounds were synthesized and completely characterized using ¹H NMR, ¹³C NMR, IR, and elemental analysis.     

Synthesis, characterization and some properties of epoxy resins containing azomethine bonding

New epoxy resins were prepared from hydroxyl substituted Schiff base monomers in two steps. The first step is based on the synthesis of hydroxyl substituted Schiff base monomers via condensation reaction. The second step includes the reaction between Schiff base monomers with epichlorohydrine (EPC) to obtain epoxy resins. The structures of resulting compounds were confirmed by FTIR and ¹H-NMR. TG-DTA and DSC measurements were made for thermal characterizations of the compounds. Chemical resistances of the cured epoxy-amine systems in acidic, alkaline and organic solvents were determined for coating applications. HCl (aqueous solution, 10%), NaOH (aqueous solution, 10%), DMSO, DMF, N-methylpyrrolidone, ethanol, THF and acetone were used for corrosion tests. Chemical resistance data show that the synthesized resins have good chemical resistance against various acid, alkaline and common organic solvents.     

Investigation of metal activation of a partially purified polyphenol oxidase enzyme electrode

Biosensors can be developed using different biological materials and immobilization technologies. Enzymes are generally used in biosensor construction, and some enzymes need metal ions or small organic molecules as a cofactor for their activation. Polyphenol oxidases can be activated by several metal ions such as Cu²⁺, Mg²⁺, Zn²⁺, Mn²⁺, and Ni²⁺. In this study, a new measurement method has been developed that is based on the metal ion activation of the polyphenol oxidase enzyme used in the biosensor preparation, especially to determine the concentration of Mg²⁺ ions. Polyphenol oxidase (PPO) (EC 1.10.3.1) was partially purified from potato (Solanum tuberosum) by using (NH₄)₂SO₄ precipitation, dialysis, and lyophylization processes. As a result of this processes, approximately 30-fold purification was achieved for PPO. For construction of the biosensor, the enzyme was immobilized on the dissolved oxygen probe membrane using gelatin and glutaraldehyde (2.5%). Using the biosensor, we obtained responses for catechol in the absence and presence of Mg²⁺ ions. Differences between the biosensor responses were related to the concentration of Mg²⁺ ions. The biosensor response depends linearly on concentration of Mg²⁺ ions between 0.05 and 7.5?mM. In the optimization studies, phosphate buffer (pH 7.0, 50?mM) and 35°C were determined to be the optimum conditions. This project will be a novel biosensor study and it might bring a new term, ‘activation based biosensor’ into the biosensor area.     

Development of a Diamond Nanoparticles-based Nanosensor for Detection and Determination of Antiviral Drug Favipiravir

This study developed a nanosensor for the detection and determination of favipiravir, a presumed drug that has potential therapeutic efficacy in treating COVID-19 patients, from tablets and serum samples. This nanosensor was obtained by adding the optimum amount of diamond nanoparticles into carbon paste. For the determination of favipiravir adsorptive stripping differential pulse (AdSDPV) and adsorptive stripping square wave voltammetry (AdSSWV) were used. Limit of detection values were found as 4.83×10⁻⁹ M and 2.44×10⁻⁷ M for bulk and 5.18×10⁻⁸ M and 4.38×10⁻⁸ M for serum samples using AdSDPV and AdSSWV, respectively. Recovery studies made of the tablet and serum produced satisfactory results.