Interaction of Sodium Dodecyl Sulfate with Poly(ethyleneimine) in Bulk Solution and at the Air-Solution Interface

Interaction of sodium dodecyl sulfate (SDS) with the cationic polyelectrolyte poly(ethyleneimine) (PEI) was investigated in this study. Turbidity measurements were performed in order to analyze the interaction and complex formation in bulk solution as a function of polymer concentration and pH. Surface tension measurements were made to investigate the properties of SDS/PEI/water mixtures at air/solution interface. Results revealed that SDS/PEI complexes form in solution depending on the surfactant and polymer concentration. A decrease was observed in surface tension values in the presence of SDS/PEI mixtures compared to the values of pure SDS solutions. Both solution and interfacial properties exhibited pH dependent behavior. A shift was seen in the critical micelle concentration of SDS solutions as a function of PEI concentration and solution pH. Monovalent and divalent salt additions showed some influence on the interfacial properties of SDS solutions in the presence of PEI.     

Cloud point extraction of aluminum (III) in water samples and determination by electrothermal atomic absorption spectrometry,flame atomic absorption spectrometry and UV-visible spectrophotometry

Cloud point extraction was applied as a preconcentration step for the determination of trace level of Al(III) in water samples with electrothermal atomic absorption spectrometry (ETAAS), flame atomic absorption spectrometry (FAAS) and UV-visible spectrophotometry. The aluminum was extracted as aluminum-Eriochrome Cyanine R (ECR) complex, at pH 6 by micelles of the non-ionic surfactant octylphenoxypolyethoxyethanol (Triton X-114). The investigations showed that the same CPE procedure can be used for different detection techniques. The results obtained from these techniques were evaluated. Under the optimal conditions, limit of detection obtained with ETAAS, FAAS and UV-visible spectrophotometry were 0.03 ng mL^?1, 0.06 µg mL^?1 and 0.01 µg mL^?1, respectively. The accuracy of the procedure was tested by analysing certified reference material. The method was successfully applied to determination of aluminum in water samples and dialysis fluid.     

Selective back-extraction and preconcentration of zinc(II) from metal-1,3,5-triketone extracts prior to its determination by flame atomic absorption spectrometry

A simple back-extraction method was developed for the separation and preconcentration of trace levels of zinc from different matrices. Ethyl-2-(4-methoxybenzoyl)-3-(4-methoxyphenyl)-3-oxopropanoylcarbamate (EMPC) was used as a new complexing agent for the extraction of zinc(II) from the aqueous sample phase to the methyl isobutyl ketone (MIBK) phase as Zn(EMPC)₂ complexes. The Zn(II) can be selectively stripped with 1?mL of 0.5?mol?L^?1 HCl from Mⁿ⁺(EMPC)_n complexes [Ag(I), Al(III), Cd(II), Cr(III), Cu(II), Fe(II), Fe(III), Mn(II), Ni(II), Pb(II) and Pd(II)] which dissolved in MIBK phase. Some experimental parameters, which are important for the whole extraction process, including pH, sample volume, shaking time, amount of the EMPC reagent, amount of MIBK, ionic strength, and type of back-extractant were investigated. The recovery for Zn(II) was greater than 95%. The detection limit of the method was found to be 0.2?µg?L ^{? 1} and the relative standard deviation as 6.4%. The concentrations of Zn(II) in the certified reference materials (LGC6019 river water and NIST-1547 peach leaves) by the presented method were in good agreement with the certified values. The proposed method was succesfully applied to the determination of zinc in some natural waters, rice, hair, soil, and tea samples.     

Synthesis of melamine based polymer complexes and their thermal degradations and magnetic properties

In this study, new polymer Fe(III) and Cr(III) complexes were synthesized. These polymer complexes were characterized by using elemental analysis, FT-IR spectroscopy, MS, thermal analyses and magnetic susceptibility measurement technics. Their thermal degradations were investigated, and co-polymerization was compared to aliphatic polymerization by using 1,2-dibromomethylbenzene and o-phenylenedialdehyde. Finally, metal ratios of the complexes were determined by using atomic absorption spectroscopy. The complexes are distorted octahedral low-spin (S = 1/2) Fe(III) and distorted octahedral (S = 3/2) Cr(III) bridged by COO^? and catechol groups.     

The uranium recovery from aqueous solutions using amidoxime modified cellulose derivatives. IV. Recovery of uranium by amidoximated hydroxypropyl methylcellulose

Amidoxime modified hydroxypropyl methylcellulose (HPMC) films (HPMC-g-AO) were used for the recovery of uranium from aqueous solutions by a complexation process. The adsorption experiments were carried out by immersion of a certain amount of films in UO₂ ²⁺ solutions (resultant pH 4.1) ranging in concentration from 100 to 1,000 ppm. The effect of temperature (25–50 °C) on the adsorption capacity of HPMC-g-AO was investigated at the optimized time. The adsorption kinetics and the thermodynamics as well as the adsorption capacity of HPMC-g-AO films were investigated. The adsorption capacity was found as 765 mg UO₂ ²⁺/g dry film. The kinetic and the thermodynamic parameters (i.e. activation energy, enthalpy, entropy and Gibbs free energy) for the interaction of UO₂ ²⁺ with HPMC-g-AO were calculated based on known basic relations. The results showed that adsorption occurred through strong electrostatic interactions with an enthalpy of ?36.5 kJ/mol. The desorption of UO₂ ²⁺ were investigated using different desorption agents such as EDTA, HCl, NaHCO₃, and NaOH. After the 2 weeks treatment period, the highest desorption yield were found as 23 % with NaHCO₃.     

Synthesis of thio- and furan-fused heterocycles: furopyranone,furopyrrolone, and thienopyrrolone derivatives

We report herein the synthesis of a novel class of compounds, ethyl 4-oxo-4H-furo[3,2-c]pyran-6-yl carbonate, (7E)-7-[(dimethylamino)methylene]-4H-furo[3,2-c]pyran-4,6(7H)-dione, 5-oxo-N-phenyl-2,5-dihydro-4H-furo[3,2-b]pyrrole-4-carboxamide, and 5-oxo-N-phenyl-5,6-dihydro-4H-thieno[3,2-b]pyrrole-4-carboxamide starting from the corresponding acid derivatives. Intramolecular cyclization in the presence of thionyl chloride formed the target fused ring systems. Additional transformation was seen in the cyclization of furan-fused heterocycle. A mechanism was proposed based on experimental and computational findings.     

Asymmetric aldol addition of α-azido ketones to ethyl pyruvate mediated by a cinchona-based bifunctional urea catalyst

The first asymmetric synthesis of ethyl 4-aryl-3-azido-2-hydroxy-2-methyl-4-oxobutanoates via a cinchona organocatalyst induced aldol addition of α-azido ketones to ethyl pyruvate has been developed. The coupling reaction under optimized conditions was carried out to furnish tetrafunctionalized synthons with enantioselectivities of up to 91:9 and enriched diastereoselectivities of up to 95:5 (syn:anti).     

New fatty acid derivatives based on barbiturates and other cyclic β-dicarbonyl compounds and an acyl migration

The use of DCC, triethylamine and 4-dimethylaminopyridine in dichloromethane provides a general and standard one-pot procedure for the O-acylation of cyclic β-dicarbonyl compound derivatives (1) with palmitic and stearic acids which have long hydrocarbon tails, to synthesis of new type of fatty acid derivative in good to excellent yields. Structure elucidation was carried out by FT-IR, ¹H NMR and ¹³C NMR spectroscopy techniques. The acyl migration was also found in results and the corresponding structure was characterized by X-ray crystallography. A proposed mechanism was discussed for the formation of products.     

Unique charge-separated intermolecular and eight-membered intramolecular H-bonds in bis-(thio)barbiturates

Reaction of symmetrical and unsymmetrical (thio)barbituric acids with aldehydes in the presence of triethylamine afforded a new form of bis-(thio)barbiturate containing charge-separated inter- and eight-membered intramolecular H-bonds. The reaction products were obtained as bis-(thio)barbiturates containing eight-membered intramolecular H-bond in the presence of l-(+)-tartaric acid (TA). The intramolecular H-bond strength (kcal/mol) and corresponding pKa value for 4ab′ were estimated to be 37 kcal/mol and ?1.3, respectively.     

A new Approach for the Voltammetric Sensing of the Phytoestrogen Genistein at a Non-modified Boron-doped Diamond Electrode

An effective electrochemical sensor was constructed using an unmodified boron-doped diamond electrode for determination of genistein by square-wave voltammetry. Cyclic voltammetric investigations of genistein with HClO₄ solution indicated that irreversible behavior, adsorption-controlled and well-defined two oxidation peaks at about +0.92 (P_A1) & +1.27 V (P_A2). pH, as well as supporting electrolytes, are important in genistein oxidations. Quantification analyses of genistein were conducted using its two oxidation peaks. Using optimized experiments as well as instrumental conditions, the current response with genistein was proportionately linear in the concentrations range of 0.1 to 50.0 μg mL⁻¹ (3.7×10⁻⁷−1.9×10⁻⁴ mol L⁻¹), by the detection limit of 0.023 μg mL⁻¹ (8.5×10⁻⁸ mol L⁻¹) for P_A1 and 0.028 μg mL⁻¹ (1.1×10⁻⁷ mol L⁻¹) for P_A2 in 0.1 mol L⁻¹ HClO₄ solution (in the open circuit condition at 30 s accumulation time). Ultimately, the developed method was effectively applied to detect genistein in model human urine samples by using its second oxidation peak (P_A2).