Synthesis and fluorescent properties of some new unsymmetricbis-benzothiazolyl furans and thiophenes

Summary Some newmono- andbis-benzothiazolyl compounds with furan or thiophene nuclei were synthesized by multistep reactions from the corresponding furan and thiophene aldehydes. The data obtained from emission spectra show a large influence of the benzothiazole rings on the relative quantum efficiency of the compounds under investigation.

---

Synthese und Fluoreszenzeigenschaften von neuen unsymmetrischenbis-Benzothiazolylfuranen und thiophenen

Zusammenfassung Einige neuebis-Benzothiazolylverbindungen mit einem Furan- bzw. Thiophenenring wurden in einer mehrstufigen Reaktion dargestellt. Die Fluoreszenzdaten der untersuchten Verbindungen zeigen einen großen Einfluß der Benzothiazolringe auf die relative Fluoreszenzquantenausbeute.

     

Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Summary. Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.     

Coulometrische Wismutometrie

Zusammenfassung Durch elektrolytische Oxydation einer Bi-Anode in gesättigter NaCl-Lösung können Bi³⁺-Ionen in Lösung gebracht werden. Dieser Prozeß ermöglicht die coulometrische Bestimmung anwesender Anionen, die schwerlösliche Bi-Verbindungen bilden.Es wurden Semimikro- und Mikrobestimmungen von Phosphationen durch elektrolytisch erzeugte Bi³⁺-Ionen bei konstanter Stromstärke ausgeführt. Die Endpunktbestimmung erfolgte amperometrisch bei konstantem Potential mit einer Indikatorelektrode — tropfende Quecksilberelektrode — und mit einer gesättigten Kalomelelektrode als Bezugselektrode. Die coulometrische Wismutometrie bietet eine weitere Möglichkeit der coulometrischen Eichung volumetrischer Lösungen im Sinne des seinerzeitigen Vorschlags vonTutundi.

---

Summary Bi³⁺ ions can be brought into solution through electrolytic oxidation of a Bi-anode in saturated NaCl solution. This process makes possible the coulometric determination of the anions present that yield difficulty soluble bismuth compounds.Semimicro- and micro-determinations of phosphate ions were made via Bi³⁺-ions produced electrolytically at constant current strength. The endpoint was determined amperometrically at constant potential with an indicator electrode-dropping mercury electrode-and with a saturated calomel electrode as reference electrode. The coulometric bismuthometry affords a further possibility of the coulometric standardization of volumetric solutions in the sense of the proposal previously advanced byTutundi.

---

Résumé On peut utiliser les ions Bi³⁺ en solution par oxydation électrolytique d'une anode en bismuth, en solution de chlorure de sodium saturée. Ce procédé permet le dosage coulométrique des anions présents qui forment des composés peu solubles avec le bismuth.On a mis au point le dosage semimicro et micro des ions phosphates par les ions Bi³⁺ formés électrolytiquement sous intensité constante. On détermine par ampérométrie le point équivalent à potentiel constant à l'aide d'une électrode indicatrice — électrode de mercure à goutte pendante —et avec une électrode au calomel saturée comme électrode de référence. La «bismuthométrie» coulométrique offre de grandes possibilités pour l'étalonnage coulométrique de solutions volumétriques, suivant l'idée queTutundi a émise en son temps.

---

---

Vorgetragen beim Symposium für analytische Chemie in Graz, 29. September bis 1. Oktober 1965.

---

Wir danken Herrn Dipl.-Ing.Vladimir Pantovi für seine Hilfe bei unserer experimentellen Arbeit.     

PMR-Spektren einiger Alkoxy-9-chlor-6-nitroacridine

The spectra of some 9-chloro-6-nitroacridines with methoxy substituents in position 1,4; 2,4; 3,4; 2,3; and ethoxy substituents in positions 1, 2, 3, were recorded. The influence of electron releasing alkoxy groups and electron withdrawing nitro groups on chemical shifts of protons in the 9-chloroacridinic cycle was discussed and PMR parameters were determined, comparatively with those of acridine and 9-chloroacridine. Good agreement between calculated and experimental values is observed. The spectrum of 9-chloro-1,2,3-triethoxyacridine shows for the four protons of the ringC. (H-5, H-6, H-7, H-8) anAMNX coupling pattern whose parameters were determined.     

Competitive adsorption and desorption of a bi-solute mixture: effect of activated carbon type

This study aims to clarify the effects of carbon activation type and physical form on the extent of adsorption capacity and desorption capacity of a bi-solute mixture of phenol and 2-chlorophenol (2-CP). For this purpose, two different PACs; thermally activated Norit SA4 and chemically activated Norit CA1, and their granular countertypes with similar physical characteristics, thermally activated Norit PKDA and chemically activated Norit CAgran, were used. The thermally activated carbons were better adsorbers for phenol and 2-CP compared with chemically activated carbons, but adsorption was more reversible in the latter case. 2-CP was adsorbed preferentially by each type of activated carbon, but adsorption of phenol was strongly suppressed in the presence of 2-CP. The simplified ideal adsorbed solution (SIAS) model underestimated the 2-CP loadings and overestimated the phenol loadings. However, the improved and modified forms of the SIAS model could better predict the competitive adsorption. The type of carbon activation was decisive in the application of these models. For each activated carbon type, phenol was desorbed more readily in the bi-solute case, but desorption of 2-CP was less compared with single-solute. This was attributed to higher energies of 2-CP adsorption.     

Partial Least-Squares Study of the Effects of Organic Modifier and Physicochemical Properties on the Retention of Some Thiazoles

JPC – Journal of Planar Chromatography – Modern TLC - Reversed-phase (RP) HPTLC with aqueous ammonia-organic modifier (acetonitrile, dioxane, acetone) mobile phases has been used to...     

Stereochemistry of cyclic ether formation—II : Intramolecular cyclisation of secondary aliphatic alcohols to tetrahydrofuran-type ethers

The mechanism and stereochemistry of δ-C atom functionalisation in the reactions of secondary straight-chain aliphatic alcohols with lead tetraacetate, ceric ammonium nitrate, and heavy metal (Pb⁴⁺, Hg²⁺, Ag⁺) salts (AcO)^?1, O^2?, CO₃^2?-halogen (I₂, Br₂, Cl₂) combinations are discussed. By demonstrating the intermediacy of 5-bromo-2-hexanol, it was confirmed that the dark silver oxidebromine induced cyclisation of 2-hexanol (and alcohols in general) involves (as the other hypohalite reactions) intramolecular 1,5-hydrogen abstraction by alkoxy radicals and formation of δ-bromohydrins. A novel and simple procedure for obtaining tetrahydrofurans from alcohols by way of the hypochlorite reaction, using silver or mercuric salts and chlorine, is described.     

Synthesis and polymerization of racemic and optically active β-substituted β-propiolactones. II: β-monosubstituted and β-disubstituted monomers and polymers with different optical purities

β-(trichloromethyl)-β-propiolactone (CCl₃-PL), β-(trifluoromethyl,methyl)-β-propiolactone (CF₃, Me-PL) and β-(trifluoromethyl,ethyl)-β-propiolactone (CF₃,Et-PL) have been obtained by the reaction of ketene with chloral, 1,1,1-trifluoroacetone and 1,1,1-trifluorobutanone, respectively. Chiral catalysis lead to optically active monomers. The enantiomeric excess of the lactones has been measured by ¹H-NMR spectroscopy, in the presence of 2,2,2-trifluoro-1-(9-anthryl)ethanol or an europium chiral shift reagent. Polymerizations have been carried out in bulk or in toluene, at 60°C or 80°C, using mainly organometallic initiators. The Polymers become insoluble and crystalline at enantiomeric excesses over 80% for CCl₃-PL and 70% for CF₃,Me-PL. Melting temperatures were recorded from 238 to 268°C for poly(CCl₃-PL) and from 78 to 100°C for poly(CF₃,Me-PL), depending upon the molecular weight and the enantiomeric excess. The ¹³C-NMR specroscopy of poly(CCL₃-PL) indicates that the polymerization of the corresponding lactone leads to polymers of increasing degrees of isotacticity with the enantiomeric excess of the monomer.     

Improvement of electron capture efficiency by resonant excitation

A novel pulse sequence improving the efficiency for electron capture dissociation (ECD) of an unmodified Fourier transform ion cyclotron resonance (FTICR) mass spectrometer by more than an order of magnitude is presented. Commercially available FTICR instruments are usually equipped with a filament-based electron source producing an electron beam that has a rather small cross section. An ideal overlap between the rotating ion cloud and the electron beam appears to be a prerequisite for a high ECD efficiency. A reduced interception of the ion cloud and the electron beam is probably due to the contribution of the magnetron motion to the trajectory of the ions, resulting in a precession about the z-axis of the instrument. By increasing the kinetic energy and therefore increasing the cyclotron radii of the precursor ions by resonant excitation, the overlap of the rotating ion cloud with the electron beam is improved. By use of this protocol the efficiency of electron capture is substantially increased and consequently the acquisition time of ECD spectra is reduced significantly. The capability of resonant excitation of the precursor ions during the irradiation with electrons is demonstrated for standard peptides. This approach is particularly valuable for analysis and characterization of O-glycosylated peptides. In addition to amino acid sequence information, the attachment site of the labile glycan moiety is determined, and also radical-site-induced fragmentations of the glycosidic bonds are observed.     

Some new ring-D seco steroids

The Beckmann fragmentation product, 3-methoxy-17-oxo-16,17-secoestra-1,3,5(10)-trien-16-nitrile (2) has been reduced by LAH giving the expected 3-methoxy-17-hydroxy-16,17-secoestra-1,3,5(10-trien-16-amine hydrochloride (3) and 3-methoxy-17-oxa-D-homoestra-1,3,5(10)-trien-16-ol (4), by a presumed neighbouring group participation of 17-OH group in the intermediary formed 16-imino derivative (A). The structure of 4 has been proved by an alternative synthetic route by reducing 3-methoxy-17-oxa-D-homoestra-1,3,5(10)-trien-16-one (7) with di-iso-butylaluminium hydride.