Regular Liesegang patterns and precipitation waves in an open system

We investigate the regular and moving Liesegang pattern formation phenomena in an open system. First, simulations have been performed at fixed coupling between the reactive medium and the reservoir, later this control parameter was varied during the simulations resulting in various phenomena. We predicted and monitored for the first time various--dynamically changing--precipitation structures and a spatial hysteresis phenomenon, which is beyond the scope of the Turing instability. The dynamics of the reaction is well detectable using specific quantities: the total amount of precipitate and its center of gravity.     

Sorption of caesium and strontium on clinoptilolite-and mordenite-containing sedimentary rocks

The sorption of caesium and strontium from its aqueous solutions by ten clinoptilolite-and mordenite-containing sedimentary materials from Slovakia, Bulgaria, Ukraine and Greece was investigated by batch-type procedure and radiotracer techniques. The concentration of the solutions, that were performed in and without the presence of competing cations (0.005 mol·dm⁻³ KCl) varied between 1·10⁻⁴ and 5·10⁻² mol·dm⁻³. The uptake and distribution coefficient (K _d ) values determined for the materials of the different origin, were correlated with their mineralogical composition and gross cation exchange capacity (CEC). The identification of the specific uptake sites was attempted on the basis of the sorption isotherms and the content of exchangeable cations. The experimental results provide information on the suitability of the individual materials for the treatment of radioactive wastes and their application as backfills in potential nuclear waste repositories.     

Energy Recovery from Municipal Solid Waste in Small Communities

The heating values of municipal solid waste generated in three towns with a population of less than 50 000, situated in Galicia (Spain), were measured with a static bomb calorimeter. Samples of raw refuse were burnt either as received or after sorting of the different combustible components. A study was made of samples from controlled and uncontrolled landfills. The calorific values were compared with those corresponding to a commercial residual derived fuel in order to study the possibility of using municipal solid waste as a source of recovered energy. This revised version was published online in July 2006 with corrections to the Cover Date.     

Determination of physical properties of bitumens by use of near-infrared spectroscopy with neural networks. Joint modelling of linear and non-linear parameters

The fact that bitumens behave as non-Newtonian fluids results in non-linear relationships between their near-infrared (NIR) spectra and the physico-chemical properties that define their consistency (viz. penetration and viscosity). Determining such properties using linear calibration techniques [e.g. partial least-squares regression (PLSR)] entails the previous transformation of the original variables by use of non-linear functions and employing the transformed variables to construct the models. Other properties of bitumens such as density and composition exhibit linear relationships with their NIR spectra. Artificial neural networks (ANNs) enable modelling of systems with a non-linear property-spectrum relationship; also, they allow one to determine several properties of a sample with a single model, so they are effective alternatives to linear calibration methods. In this work, the ability of ANNs simultaneously to determine both linear and non-linear parameters for bitumens without the need previously to transform the original variables was assessed. Based on the results, ANNs allow the simultaneous determination of several linear and non-linear physical properties typical of bitumens.     

High-performance liquid chromatographic separation of gangliosides, combined with immunological detection and fast atom bombardment mass spectrometric characterization

A complete strategy for the isolation of individual mono- and disialogangliosides has been elaborated. We have used straight-phase silica gel chromatography or partitioning to obtain a crude ganglioside fraction. This fraction was then peracetylated and run through a second silica gel column. After anion-exchange chromatography the gangliosides were separated by straight-phase high-performance liquid chromatography with chloroform-methanol-water mixtures as eluting solvents. The method is suitable for preparative isolation of gangliosides and subsequent structural characterization by thin-layer chromatography-enzyme-linked immunosorbent assay, fast atom bombardment mass spectrometry and/or gas chromatography-mass spectrometry, which is demonstrated by several examples, including the separation of GalNAc-II3NeuAc-GgOse4Cer from GalNAc-isoII3NeuAc-GgOse4Cer.     

Charge transfer across a polymer gel/liquid interface: determination of ionophores

An electrochemical method for the determination of the ionophores monensin and lasalocid was developed, based on the polarization of an agar gel/nitrobenzene electrolyte interface. The measured current corresponding to the facilitated ion transfer across this interface is directly proportional to the concentration of an ionophore dissolved in the organic phase. Using cyclic voltammetry in a three-electrode system the detection limit for both ionophores is about 3 × 10^?5 M.     

Thermal properties of hydrated lanthanum and yttrium polyvanadates

The study of thermal properties of La(HV₆O₁₆)₃.19.5H₂O and Y(HV₆O₁₆)₃.22H₂O showed, that the dehydration of both compounds is discontinuous. After release of last water amount, the parent structure is destabilized and products of thermal decomposition, V₂O₅ and corresponding orthovanadates, start to be formed. The decomposition of La(HV₆O₁₆)₃.19.5H₂O results in formation of V₂O₅ and LaVO₄, the temperatures of crystallization of which differ. The decomposition products of yttrium salt crystallize simultaneously. All compounds formed melt at 685°C. By crystallization of the melt, the mixtures V₂O₅-LaVO₄ and V₂O₅-YVO₄, respectively, are formed which are stable up to 1000°C.     

Inexpensive device for measurements with ion-selective and pH electrodes

The design and construction of a simple device for measuring ionic concentrations (or pH) with ion-selective electrodes are described. The automated system includes a special electronic circuit with an operational amplifier, a signal conditioner and a personalcomputer. A digital multimeter can be used if automation is not required. The results obtained in tests with iodide-, chloride- and nitrate-selective electrodes and glass electrodes show very good agreement with those obtained with sophisticated commercial apparatus.     

Esterification of C1−C8 carboxylic acids to n-butyl esters in aqueous solutions for their gas chromatographic analysis

Summary The esterification of C₁–C₈ fatty acid in aqueous solutions and in the presence of sulfuric or hydrochloric acid and with n-butanol is described. It has been established that the esterification can be used for the quantitative determination of these fatty acids in the concentration ratio range of [H₂O]/[n-BuOH]=0.01–5.3. In the concentration ratio range of 0.01–0.8 the water present does not interfere. In the concentration range of above 0.8 anhydrous sodium sulfate is used for binding the water, in the amount of [Na₂SO₄.anh.]/[H₂O]0.2.     

Conformational behaviour of 2,2′-bipyrrole

The rotational potential around the interannular bond in 2,2-bipyrrole has been calculated making use of standard minimal STO-3G and split valence 4-31G basis sets. Geometrical optimization concerning the most significant interannular internal parameters has been performed with both basis sets. The trans conformer is predicted to be more stable than the cis. The minimal basis set predicts the existence of a cisoid-gauche minimum which after limited optimization becomes very shallow and it seems to be an artifact of the rigid rotor approximation. At 4-31G level, both the trans and cis conformers represent maxima in the potential curve and two gauche minima appear at =46.0° and =147.6°, the latter being the absolute minimum. The absolute maximum of the potential curve corresponds to the cis conformer.