光学薄膜氧气传感器研究进展

光学薄膜氧气传感器具有检测精度高、选择性好、抗干扰能力强等优点,近年来日益得到人们的广泛重视,研究工作也在不断深化和拓展,展现出十分广阔的应用前景。本文按光学薄膜氧气传感器的制备方法分类扼要综述了光学薄膜氧气传感器的研究现状,并展望了其研究前景。     

Isolation of xylose reductase gene ofPichia stipitis and its expression inSaccharomyces cerevisiae

Applied Biochemistry and Biotechnology - A NADPH/NADH-dependent xylose reductase gene was isolated from the xylose-assimilating yeast,Pichia stipitis. DNA sequence analysis showed that the gene...     

Determination of iodide in drinking water by isotope dilution analysis

The most suitable way of determination iodine-deficiency is to measure iodine concentrations in water and urine. For this reason, a method that can determine iodide concentrations in drinking water and suitable for routine analysis, is developed. Water samples have been collected from four Aegean localities: Izmir, Salihli, Ödemis and Tire situated in the western Turkey. The method is based on substochiometric isotope dilution analysis. Iodile concentrations vary within 9.86–85.14 μg/l ranges in the analyzed samples. Mean value is 44.92±22.07 μg/l.     

Quantum calculations of vibrational harmonic energy transfer in collinear collisions of X2Y2 + A and X2Y2 + A2

Quantum calculations of translational-vibrational energy transfer in atom-four-atom and diatom-four-atom collinear collisions are reported. Energy transfer shows a strong dependence on the reduced mass of the collision system and on whether the incoming particle is an atom or a molecule. Atom-molecule collisions are more efficient for energy transfer purposes.     

茜素荷移分光光度法测定泛酸钙

泛酸又名遍多酸，是人和动物所必需的一种B族维生素，作为辅酶A的一个重要组成部分参与体内新陈代谢，特别是对脂肪的合成与代谢起着十分重要的作用，近年来作为营养增补剂，广泛应用于医药、食品和饲料工业。商品泛酸通常制成钙盐即泛酸钙，目前已报道的分析方法主要有微生物测定法、酶联免疫法和高效液相色谱法以及以测定泛酸水解后的产物β-丙氨酸为基础建立起来的离子交换层析分光光度法和茚三酮分光光度法等，     

Thermosensitive mucoadhesive gel formulation loaded with 5-Fu: cyclodextrin complex for HPV-induced cervical cancer

Human Papilloma Virus (HPV) infections are the major cause of cervical cancers. To achieve a better therapeutic efficacy and patient compliance in the treatment for HPV-induced cervical cancers, anticancer agent 5-fluorouracil has been formulated in a vaginal gel using the thermosensitive polymer Pluronic^® F127 together with alternative mucoadhesive polymers e.g., hyaluronic acid, Carbopol 934 and hydroxypropylmethylcellulose. To increase its aqueous solubility and to achieve the complete release of 5-FU from the gel, the drug was incorporated as its inclusion complex with 1:1 molar ratio with either β-cyclodextrin or hydroxypropyl-β-cyclodextrin. Following the characterization of drug:CD complexes, thermosensitive gel formulations containing different mucoadhesive polymers and the drug in free or complexed form were characterized in vitro by determining the gelation temperature and the rheological behavior of different formulations along with the in vitro release profiles of these formulations in pH 5.5 citrate buffer. It was observed that complexation with cyclodextrin accelerated the release of 5-FU with the exception of formulation containing Carbopol 934 as mucoadhesive polymer. As far as rheological properties are concerned, favorable thermosensitive in situ gelling properties were obtained with formulations containing HPMC as mucoadhesive polymer. Complete release of 5-FU from gels were obtained with both complexes of β-CD and HP-β-CD and cytotoxicity studies against HeLa human cervical carcinoma cells demonstrated that 1% 5-FU:CD complexes were equally effective as 1% free 5-FU indicating better therapeutic efficacy with lower dose.     

Study on labeling conditions of125I-synkavit by the iodogen method

Labeling conditions of synkavit (2-methyl-1,4-naphthoquinol disodium phosphate) with iodine-125 have been studied. In this study, labeling temperature, reaction time, successive using of iodogen coated tubes, iodogen amount and synkavit concentrations have been determined to get optimum conditions for maximum labeling. Final results showed that when the labeling temperature, reaction time, synkavit concentration, and iodogen amount were, at room temperature, 15 min (in the case of successive using of three iodogen coated tubes), 2 mg ml^–1 and 5 mg, respectively; labeling yield was 90% and specific activities of the order of 555 GBq mmol^–1 (15 Ci mmol^–1) have been obtained.     

COPOLYMERS OF 2-ACRYLAMIDO-2-METHYL-1-PROPANESULFONIC ACID/MALEIC ACID： SYNTHESIS, CHARACTERIZATION AND ANTIMICROBIAL ACTIVITY

2-Acrylamido-2-methy1-1-propanesulfonic acid(AMPS),and maleic acid(MA)copolymerized with different feed ratios using N,N-dimethylformamide as a solvent and benzoyl peroxide(Bz_2O_2)as an initiator at 70℃.Structure and composition of copolymers for a wide range of monomer feed were determined by elemental analysis(content of N for AMPS-units).Monomer reactivity ratios for AMPS(M_1)-MA(M_2)pair were determined by the application of conventional linearization methods such as Fineman-Ross(F-R),Kelen-Tüd(?)s(KT)and Extended Kelen-Tüds(EKT)and a nonlinear error invariable model method using a computer program RREVM.The characterizations were done by Fourier transform infrared spectroscopy(FTIR),differential scanning calorimetry(DSC)thermal gravimetry analysis(TGA),and and X-ray diffraction.The antimicrobial effects of polymers were also tested on various bacteria,and yeast.     

trans‐Diaquabis(3‐hydroxybenzoato‐κO1)bis(nicotinamide‐κN1)copper(II)

The title compound, [Cu(C₇H₅O₃)₂(C₆H₆N₂O)₂(H₂O)₂], is a two‐dimensional hydrogen‐bonded supramolecular complex. The Cu^II ion resides on a centre of symmetry and is in an octahedral coordination environment comprising two pyridine N atoms, two carboxylate O atoms and two O atoms from water molecules. Intermolecular N—H...O and O—H...O hydrogen bonds produce R₂²(4), R₂²(8) and R₂²(15) rings which lead to one‐dimensional polymeric chains. An extensive two‐dimensional network of N—H...O and O—H...O hydrogen bonds and C—H...π interactions are responsible for crystal stabilization.     

Single-walled carbon nanotube-based coaxial nanowires: synthesis, characterization, and electrical properties

We report herein the template-directed synthesis, characterization, and electric properties of single-walled carbon nanotube- (SWNT-) based coaxial nanowires, that is, core (SWNT)-shell (conducting polypyrrole and polyaniline) nanowires. The SWNTs were first dispersed in aqueous solutions containing cationic surfactant cetyltrimethylammonium bromide (CTAB) or nonionic surfactant poly(ethylene glycol) mono-p-nonyl phenyl ether (O pi-10). Each individual nanotube (or small bundle) was then encased in its own micellelike envelope with hydrophobic surfactant groups orientated toward the nanotube and hydrophilic groups orientated toward the solution. And thus a hydrophobic region within the micelle/SWNT (called a micelle/SWNT hybrid template) was formed. Insertion and growth of pyrrole or aniline monomers in this hybrid template, upon removal of the surfactant, produce coaxial structures with a SWNT center and conducting polypyrrole or polyaniline coating. Raman and Fourier transform infrared (FTIR) spectroscopy and scanning (SEM) and transmission (TEM) electron microscopy were used to characterize the composition and the structures of these coaxial nanowires. The results revealed that the micellar molecules used could affect the surface morphologies of the resulting coaxial nanowires but not the molecular structures of the corresponding conducting polymers. Electric properties testing indicated that the SWNTs played the key roles in the conducting polymer/SWNT composites during electron transfer in the temperature range 77 K to room temperature. Compared with the SWNT network embedded in the conducting polymers, the composites within which SWNTs were coated perfectly by the identical conducting polymers exhibited higher barrier heights during electron transfer.