Synthesis and deprotonation of 2-(pyridyl)phenols and 2-(pyridyl)anilines

2-(2- and 3-Pyridyl)anilines (1, 2), 2,2-dimethyl-N-[2-(2- and 3-pyridyl)phenyl]propanamides (3, 4), and 2-, 3- and 4-(2-methoxyphenyl)pyridines (7-9) are readily synthesized using cross-coupling reactions. Whereas the amines 1, 2 undergo side reactions, the corresponding amides 3, 4 are deprotonated with lithium 2,2,6,6-tetramethylpiperidide (LTMP): the compound 3 at C6' under in situ quenching, and the compound 4 at C4'. When the ether 7 is subjected to the same reagent, lithiation occurs at C6'.     

A general strategy for the diastereoselective synthesis of 2,6-diaryl-3,7-dioxabicyclo[3.3.0]octane lignans

A strategy for the stereoselective synthesis of all the possible diastereoisomers of the 2,6-diaryl-3,7-dioxabicyclo[3.3.0]octane (furofuran) lignans from a single dihydrofuran precursor is described. The key steps involve a diastereocontrolled templated cationic cyclization followed by stereoselective reduction of the resulting methyl glycoside.     

An insight into the aromaticity of fullerene anions: experimental evidence for diamagnetic ring currents in the five-membered rings of C(60)(6-) and C(70)(6-)

Reduction of the two "closed" [6,6] methanofullerenes, [6,6]C(61)H(2) (1) and [6,6]C(71)H(2) (5), to the corresponding hexaanions with lithium metal causes the bridgehead-bridgehead bonds to open, at least partially, and this change gives rise to diamagnetic ring currents in the resulting homoconjugated six-membered rings (6-MRs). These new ring currents shield the overlying hydrogen atoms on the methylene bridge and induce upfield shifts of 1.60 and 0.11 ppm in their (1)H NMR resonances, respectively. Analogous reduction of the already "open" [5,6]methanofullerenes, [5,6]C(61)H(2) (2) and [5,6]C(71)H(2) (3 and 4), only slightly enhances the shielding of the hydrogen atoms over the homoconjugated 6-MRs (upfield shifts of 0.13, 0.68, and 0.14 ppm, respectively) but leads to exceptionally strong diamagnetic ring currents in the homoconjugated five- membered rings (5-MRs), as evidenced by dramatic shielding of the hydrogen atoms situated over them (upfield shift of 5.01, 6.78, and 1.63 ppm, respectively). The strongest shielding is seen for the hydrogen atom sitting over the 5-MR at the pole of C(71)H(2)(6)(-) (delta = -0.255 ppm) indicating that the excess charge density is concentrated at the poles.     

Isotachophoretic analysis of the dihydrofolate reductase reaction in the presence of methotrexate and ascorbic acid

The antifolate methotrexate (MTX) is widely used in cancer chemotherapy. In this study, we show that MTX (MTX-Glu1) and MTX-polyglutamates (MTX-Glu2-5) strongly inhibited the growth of the leukemic cell line MOLT-4. This effect, however, was mitigated by ascorbic acid. We investigated whether ascorbic acid is able to reduce dihydrofolic acid (DHF) to tetrahydrofolic acid (THF) directly or by circumventing the MTX inhibition of dihydrofolate reductase (DHFR). The inhibition of this NADPH-dependent reduction of DHF by MTX-Glun in the absence or presence of ascorbate, was determined by analytical isotachophoresis. Using 0.01 M HCl/histidine, pH 6.0, as a leading electrolyte (L) and 0.005 M 2-(N-morpholino)ethanesulfonic acid (MES)/histidine, pH 6.0, as a terminating electrolyte (T), MTX-Glun derivatives including MTX-Glu1 could be easily separated, whereas the quantitative estimation of THF was not possible. A quantitative characterization of the DHFR reaction by measuring NADPH, NADP+ and ascorbate was achieved with another system (L: 0.01 M HCI/beta-alanine, pH 3.73; T: 0.01 M caproic acid, pH 3.27). Nanomolar concentrations of MTX-Glu1-5 inhibited consumption of NADPH and production of NADP+. Ascorbic acid was not able to reduce DHF, neither directly nor after inhibition of DHFR by MTX. However, ascorbic acid seemed to diminish the oxidation of THF and this may account for its capacity to reduce the inhibitory effect of MTX on MOLT-4 cells.     

Minimal number of chromatographic test parameters for the characterisation of reversed-phase liquid chromatographic stationary phases

This paper focuses on the classification or differentiation of RP-HPLC columns based on measured chromatographic properties. A chemometric study has been conducted on a published data set consisting of 85 RP-HPLC columns and on a data set consisting of 47 self-tested columns. Principal component analysis enables determination of the number of parameters necessary for a rational differentiation. The results show that reducing the number of parameters for such differentiation still allows classification of the columns just as a higher number did. It is shown that three test parameters produce a classification similar to that obtained with five parameters.     

L X-ray production cross sections, average L shell fluorescence yield and intensity ratios in heavy elements

L X-ray fluorescence cross sections, and intensity ratios were measured for elements in the 70￡Z￡92 atomic range at the excitation energy 59.5 keV using a Si(Li) detector. Furthermore, L X-ray fluorescence cross sections and intensity ratios were calculated for elements in the same range. The average L shell fluorescence yields were derived using experimental L X-ray fluorescence cross sections and theoretical photoionization cross sections. The obtained results were compared with other experimental and theoretical values. This revised version was published online in August 2006 with corrections to the Cover Date.     

Direct determination of sulfite in food samples by a biosensor based on plant tissue homogenate

In the work described here, a biosensor was developed for the determination of sulfite in food. Malva vulgaris tissue homogenate containing sulfite oxidase enzyme was used as the biological material. M. vulgaris tissue homogenate was crosslinked with gelatin using glutaraldehyde and fixed on a pretreated Teflon membrane. Sulfite was enzymatically converted to sulfate in the presence of the dissolved oxygen, which was monitored amperometrically. Sulfite determination was carried out by standard curves, which were obtained by the measurement of consumed oxygen level related to sulfite concentration. Several operational parameters had been investigated: the amounts of plant tissue homogenate and gelatin, percentage of glutaraldehyde, optimum pH and temperature. Also, some characterization studies were done. There was linearity in the range between 0.2 and 1.8 mM at 35 °C and pH 7.5. The results of real sample analysis obtained with the biosensor agreed well with the enzymatic reference method using spectrophotometric detection.     

Radionuclides in a sediment trap and bottom sediment samples from the eastern Turkish coast of the Black Sea

Summary Radionuclide (¹³⁷Cs, ²³⁸U, ²³²Th and ⁴⁰K) concentrations were determined in a sediment trap and bottom sediment samples collected from a station at the eastern Turkish coast of the Black Sea. The specific activity of the ¹³⁷Cs radionuclide in the settling particles ranged from 0.04±0.01 to 0.10±0.02 Bq^. g^-1dry weight. The calculated flux rate of the ¹³⁷Cs was between 0.37 and 2.59 Bq^. m^-2. d^-1in the sampling periods of 2002 and 2003. The ¹³⁷Cs concentration in the bottom sediment profile were between 0.039±0.013-9.083±0.017 Bq^. g^-1dry weight in the same station. The vertical profile of the radionuclides suggests that they have little mobility during the 17 years after the Chernobyl accident.     

Nonequilibrium synthesis and assembly of hybrid inorganic-protein nanostructures using an engineered DNA binding protein

We show that a protein with no intrinsic inorganic synthesis activity can be endowed with the ability to control the formation of inorganic nanostructures under thermodynamically unfavorable (nonequilibrium) conditions, reproducing a key feature of biological hard-tissue growth and assembly. The nonequilibrium synthesis of Cu(2)O nanoparticles is accomplished using an engineered derivative of the DNA-binding protein TraI in a room-temperature precursor electrolyte. The functional TraI derivative (TraIi1753::CN225) is engineered to possess a cysteine-constrained 12-residue Cu(2)O binding sequence, designated CN225, that is inserted into a permissive site in TraI. When TraIi1753::CN225 is included in the precursor electrolyte, stable Cu(2)O nanoparticles form, even though the concentrations of [Cu(+)] and [OH(-)] are at 5% of the solubility product (K(sp,Cu2O)). Negative control experiments verify that Cu(2)O formation is controlled by inclusion of the CN225 binding sequence. Transmission electron microscopy and electron diffraction reveal a core-shell structure for the nonequilibrium nanoparticles: a 2 nm Cu(2)O core is surrounded by an adsorbed protein shell. Quantitative protein adsorption studies show that the unexpected stability of Cu(2)O is imparted by the nanomolar surface binding affinity of TraIi1753::CN225 for Cu(2)O (K(d) = 1.2 x 10(-)(8) M), which provides favorable interfacial energetics (-45 kJ/mol) for the core-shell configuration. The protein shell retains the DNA-binding traits of TraI, as evidenced by the spontaneous organization of nanoparticles onto circular double-stranded DNA.