Structural characterization of nanopatterned surfaces

In this work, chemically and topographically nanopatterned surfaces were produced by a top-down processing approach for biosensing devices. The nanopatterning was the result of the combination of plasma polymerisation (pp) of biofunctional materials and colloidal lithography techniques. The morphological and chemical properties induced by the plasma deposition-etching treatment were characterised by optical method combining ellipsometry and Fourier Transform Infrared spectroscopy studies. This method supported by atomic force microscopy measurements, allowed the full optical characterization of each step of the top-down process. The optical characterization of the end-up nanopatterned samples demonstrated that the chosen process is able to produce well-defined nanostructured surfaces with controlled chemical and morphological properties.     

Fixed mesh approximation of ordinary differential equations with impulses

When trains of impulse controls are present on the right-hand side of a system of ordinary differential equations, the solution is no longer smooth and contains jumps which can accumulate at several points in the time interval. In technological and physical systems the sum of the absolute value of all the impulses is finite and hence the total variation of the solution is finite. So the solution at best belongs to the space BV of vector functions with bounded variation. Unless variable node methods are used, the loss of smoothness of the solution would a priori make higher-order methods over a fixed mesh inactractive. Indeed in general the order of -convergence is and the nodal rate is . However in the linear case -convergence rate remains but the nodal rate can go up to by using one-step or multistep scheme with a nodal rate up to when the solution belongs to . Proofs are given of error estimates and several numerical experiments confirm the optimality of the estimates. Received March 15, 1996 / Revised version received January 3, 1997     

Sample preparation procedure for the determination of sulphur and trace metals in oil products by the ICP with a minitorch using emulsions

A quick sample preparation method was used for the determination of sulphur and trace metals in oil and oily products by the ICP with a minitorch. Stable aqueous emulsions of oils and oil products were made by using two kinds of emulsifiers (one with low sulphur content, the other sulfonated). Aqueous standard solutions can be used for the preparation of calibration solutions. The contents of S, Al, Cr, Cu, Fe, Mg, Ni and Pb in aqueous emulsions were determined and the results were in good agreement with the composition of oil standard solutions used for control analysis procedure.     

饲料中微量无机砷测定方法的研究

本文提出了用活性炭吸附分离饲料中有机砷化合物的新方法。，有机砷化合物经分离后用ＤＤＴＣ－Ａｇ比色测定１０＾－６级的无机砷。本法操作简便、快速、其测定误差小于平均值的１５％。     

Ab initio potential energy surface and pressure broadening coefficients for the He-CH3F complex

Symmetry-adapted perturbation theory has been applied to compute the He-CH₃F potential with the CH₃F molecule assumed rigid. The potential has a global minimum of −48.9 cm⁻¹ at the center of mass separation of 7.2 bohr with the helium atom lying along the C-F bond on the hydrogen’s side. The computed points were fitted to an analytic energy surface with a correct asymptotic behaviour. This potential has been used to compute the pressure broadening (PB) coefficients for the (j, k) = (0, 0) → (1, 0) and (1, 0) → (2, 0) rotational transitions of CH₃F perturbed by helium for a wide range of temperatures. Close-coupling results are compared with the experimental data of Willey et al. [J. Chem. Phys. 97 (1992) 4723], Beaky et al. [J. Mol. Struct. 352/353 (1995) 245] and infinite order sudden results are compared with those of Grigoriev et al. [J. Mol. Struct. 186 (1997) 48] for the ν₆ band of CH₃F perturbed by helium at room temperature. To our knowledge, present work is the first attempt of making fully ab initio calculations of collisional cross-sections and pressure broadening coefficients for this simple symmetric top system at low and room temperature.     

Infrared and Raman spectroscopic investigation of Eu3+-doped mono and Di-urethanesil hybrid siliceous materials

The general features of two series of sol-gel derived materials, designatedurethanesils (Ut), have been investigated by infrared and Raman spectroscopies with the goal of elucidating the chemical environment of the Eu³⁺ cations. The host frameworks of the two families of ormolytes studied have been represented by m-Ut(350) and d-Ut(300), where m stands for mono, d stands for di, 350 and 300 are the average molecular weights of the organic precursors (poly(ethylene glycol) methyl ether, PEGME, and poly(ethylene glycol), PEG, respectively). The hybrid matrix of the mono-xerogels is composed by a siliceous backbone bonded by means of urethane linkages (-NHC (=O)O-) to pendant methyl end capped oligopolymer chains with approximately 7 oxyethylene units, whereas that of the di-xerogels is based on a siliceous network grafted through urethane groups to both ends of poly(oxyethylene) segments containing about 6 (OCH₂CH₂) repeat units. Both classes of materials have been doped with europium triflate (Eu(CF₃SO₃)₃). The doped samples have been identified by m-Ut(350)_nEu(CF₃SO₃)₃ and d-Ut(300)_nEu(CF₃SO₃), where n is the molar ratio of (OCH₂CH₂) repeat units per Eu³⁺ ion. Materials with n ranging from ∞ to 5 have been analyzed. The spectral data obtained provide evidence that the cations begin to coordinate to the ether oxygen atoms of the oligopolymer chains at n=40 in the mono-urethanesils and at n=10 in the di-urethanesils. In mono-urethanesils samples with n>40 and in di-urethanesils materials with n>10, the Eu³⁺ coordinate exclusively to the carbonyl oxygen atoms of the urethane linkages. Paper presented at the 8th EuroConference on Ionics, Carvoeiro, Algarve, Portugal, Sept. 16–22, 2001.     

The Random Average Process and Random Walk in a Space-Time Random Environment in One Dimension

We study space-time fluctuations around a characteristic line for a one-dimensional interacting system known as the random average process. The state of this system is a real-valued function on the integers. New values of the function are created by averaging previous values with random weights. The fluctuations analyzed occur on the scale n ^1/4, where n is the ratio of macroscopic and microscopic scales in the system. The limits of the fluctuations are described by a family of Gaussian processes. In cases of known product-form invariant distributions, this limit is a two-parameter process whose time marginals are fractional Brownian motions with Hurst parameter 1/4. Along the way we study the limits of quenched mean processes for a random walk in a space-time random environment. These limits also happen at scale n ^1/4 and are described by certain Gaussian processes that we identify. In particular, when we look at a backward quenched mean process, the limit process is the solution of a stochastic heat equation.     

First measurement of the ϱ spectral function in nuclear collisions

The NA60 experiment at the CERN SPS has studied low-mass muon pairs in 158 A GeV In–In collisions. A strong excess of pairs is observed above the yield expected from neutral meson decays. The unprecedented sample size close to 400000 events and the good mass resolution of about 2% made it possible to isolate the excess by subtraction of the decay sources. The shape of the resulting mass spectrum shows some non-trivial centrality dependence, but is largely consistent with a dominant contribution from π⁺π^-→ϱ→μ⁺μ^- annihilation. The associated ϱ spectral function exhibits considerable broadening, but essentially no shift in mass. The p_T-differential mass spectra show the excess to be much stronger at low p_T than at high p_T. The results are compared to theoretical model predictions; they tend to rule out models linking hadron masses directly to the chiral condensate. PACS 25.75.-q; 12.38.Mh; 13.85.Qk     

Aluminum(III) complexes containing O,O chelating ligand

The stoichiometric reactions of trimethylaluminum with 2,6‐(MeOCH₂)₂C₆H₃OH (LH) revealed compounds L₃Al ( 1 ) and L₂AlMe ( 2 ). On the other hand reaction of 1 equiv. of LH with trimethylaluminum did not lead to the formation of complex LAlMe₂ ( 3 ), rather 2 together with Me₃Al were observed as a result of a disproportionation of 3 . Compounds 1 and 2 were characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy and in the case of 1 by X‐ray diffraction. Derivative 2 underwent transmetalation with Ph₃SnOH, giving LSnPh₃ ( 4 ) as the result of a migration of ligand L from the aluminum to the tin atom. The identity of 4 was established by elemental analysis, ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy and ¹H, ¹¹⁹Sn HMBC experiments. The system 2 and B(C₆F₅)₃ in a 1:1 molar ratio was shown to be active in the polymerization of propylene oxide and ε‐caprolactone. Copyright © 2007 John Wiley & Sons, Ltd.