Determination of Cu(II), Fe(III), Mn(II) and Zn(II) in various samples after preconcentration with Rhizopus oryzae loaded natural cellulose (almond bark)

A procedure for the pre-concentration of Cu(II), Fe(III), Mn(II) and Zn(II) is described utilising a minicolumn of natural cellulose (almond bark) modified with fungus (Rhizopus oryzae) prior to their determination by high-resolution continuum source flame atomic absorption spectrometry (HR-CS FAAS). The optimum pre-concentration conditions such as pH and flow rate for the analytes have been investigated. The analytes were quantitatively retained on the column between pH 6 and 8. Elution was made with 10 mL 1 M HCl solution. Under the optimum conditions, recoveries were found as 97 ± 3%, 96 ± 3%, 98 ± 3% and 94 ± 2% for Cu(II), Fe(III), Mn(II) and Zn(II), respectively, at 95% confidence level. The detection limits obtained from preconcentration of 50 mL of blank solutions (n = 11) were 1.6, 1.8, 2.8 and 1.2 µg L^?1 for Cu(II), Fe(III), Mn(II) and Zn(II), respectively. Relative standard deviations (RSD) of the recoveries for five replicate analyses were lower than 3%. The proposed method was validated by analysing certified reference materials (Peach Leaves SRM 1547 and Fish Tissue IAEA-407). Determination of the Cu(II), Fe(III), Mn(II) and Zn(II) in K?z?l?rmak River water, green beans, beans leave and tomato leaves and fish (Tinca tinca) tissue samples was performed by the proposed method.     

Voltammetric sensing of triclosan in the presence of cetyltrimethylammonium bromide using a cathodically pretreated boron-doped diamond electrode

ABSTRACT

In the present study, a simple, cheap and sensitive electrochemical method based on a cathodically pretreated boron-doped diamond (CPT-BDD) electrode is described for the detection of triclosan with the cationic surfactant (cetyltrimethylammonium bromide, CTAB) media. The oxidation of triclosan was irreversible and exhibited an adsorption controlled process. The sensitivity of the adsorptive stripping voltammetric measurements was significantly improved with addition of CTAB. Using square-wave stripping mode, a linear response was obtained for triclosan determination in Britton-Robinson buffer solution at pH 9.0 containing 2.5 × 10^?4 M CTAB at around + 0.67 V (vs. Ag/AgCl) (after 30 s accumulation at open-circuit condition). The method could be used in the range of 0.01–1.0 μg mL^?1 (3.5 × 10^?8–3.5 × 10^?6 M), with a detection limit of 0.0023 μg mL^?1 (7.9 × 10^?9 M). The feasibility of the proposed method for the determination of triclosan in water samples was checked in spiked tap water.     

Preparation and characterization of PEPPSI-palladium N-heterocyclic carbene complexes using benzimidazolium salts catalyzed Suzuki–Miyaura cross coupling reaction and their antitumor and antimicrobial activities

New palladium complexes were efficiently synthesized from the reaction of benzimidazolium salts 2a–e, potassium carbonate (K₂CO₃) and palladium chloride (PdCl₂) in pyridine (for 3a–e). The catalytic activity of these complexes in a catalytic system including palladium complexes and K₂CO₃ in DMF-H₂O was evaluated in Suzuki–Miyaura cross-coupling reactions of aryl bromides and chlorides with phenylboronic acid. Our novel complexes show excellent catalytic activities with high turnover numbers (TON) and high turnover frequencies (TOF) (e.g. for the Suzuki–Miyaura reaction: TON up to 370 and TOF up to 123.3?h^?1). Both benzimidazolium salts 2a–e and complexes 3 have been characterized using spectroscopic data and elemental analysis. The antimicrobial activity of the N-heterocyclic carbene palladium complexes 3a–e varies with the nature of the ligands. Also, the IC₅₀ values of both, complexes (3a–e) and benzimidazoles 2a–e, have been determined. In addition, the new palladium complexes were screened for their antitumor activity. Complexes 3e and 3d exhibited the highest antitumor effect with IC₅₀ values 6.85?μg/mL against MCF-7 and 10.75?μg/mL against T47D, respectively.     

Polymerization of N-Vinylcaprolactam and Characterization of Poly(N-Vinylcaprolactam)

Poly(N-vinylcaprolactam), PNVCL, is a nonionic, nontoxic, water soluble, thermally sensitive and biocompatible polymer. It contains hydrophilic carboxylic and amide groups with hydrophobic carbon-carbon backbone suitable for biomedical applications. In this study, N-vinylcaprolactam was polymerized by free radical polymerization at 50, 60 and 70°C. The synthesized polymers were white powder, soluble in water and common organic solvents. The percent conversion vs. time plot is almost linear up to about 60% conversion without induction period. The activation energy of polymerization was calculated as 108.4 kJ/mol from the Arrhenius plot. FTIR and NMR results showed that polymerization takes place by opening of carbon-carbon double bond without any change in the caprolactam ring. Polymer was characterized by FTIR, ¹H-NMR and ¹³C -NMR, DSC, TGA and XRD techniques. The DSC thermogram of monomer has shown a melting point at 37.3°C. The polymer has T_g value at 1.8°C and softening temperature at 68.8°C. It was determined from the X-Ray powder pattern that the polymerization proceed in the b-crystallographic axis direction.     

Detection of melamine in milk by surface-enhanced Raman spectroscopy coupled with magnetic and Raman-labeled nanoparticles

A new method based on surface-enhanced Raman spectroscopy (SERS) has been developed for sensitive and rapid detection of melamine. Spherical magnetic-core gold-shell nanoparticles (AuNPs) and rod-shaped gold nanoparticles (nanorods) labeled with a Raman-active compound were used to form a complex with the melamine molecules. 5,5'-Dithiobis(2-nitrobenzoic acid) was used as Raman-active compound because it is readily adsorbed by a gold nanoparticle surface forming a self-assembled monolayer (SAM) and has strong Raman scattering at 1330 cm(-1), because of the symmetric NO(2) stretch. The calibration curve was obtained by plotting Raman band area at 1330 cm(-1) against melamine concentration. A linear relationship was obtained with a high determination coefficient (R(2)=0.997). The method was validated for linearity, sensitivity, precision (intra-day and inter-day repeatability), and recovery. In the model system, the limits of detection (LOD) and quantification (LOQ) were 0.38 and 1.27 mg L(-1), respectively. For melamine-spiked milk samples, LOD and LOQ values were 0.39 mg L(-1) and 1.30 mg L(-1), respectively. Intra and inter-day precision were 3.73 and 4.94 %, respectively. This method was applied to samples of skimmed milk that had been spiked with melamine at different concentrations. The recovery of the method was 95-109 % in the concentration range 2-15 mg L(-1), and average RSD was 1.71 %. Total analysis time was less than 15 min.     

The Synthesis of Novel S-, S,S-, S,S,S-, and N,S-Substituted Nitrodienes from Polyhalonitrodienes and Thiols

Abstract

The novel S-, S,S-, and S,S,S-substituted nitrobutadienes were synthesized from the reactions of 2-nitrobutadiene compounds with some thiols. The new N,S-substituted nitrobutadienes were obtained from the reaction of the mono-thiosubstituted butadienes with morpholine, thiomorpholine, homopiperazine, and piperazine derivatives. The structures of new compounds were determined by spectroscopic techniques.

GRAPHICAL ABSTRACT      

Synthesis,Characterization, and Spectroscopic Properties of Hexa(4-Bromo-2-Formyl-Phenoxy)Cyclotriphosphazene and Hexa(4-Chloro-2-Formyl-Phenoxy)Cyclotriphosphazene and Fully Substituted Cyclotriphosphazene Derivatives Bearing a Schiff Base at Room Temperature

Abstract

Hexa(4-bromo-2-formyl-phenoxy)cyclotriphosphazene (2) and hexa(4-chloro-2- formyl-phenoxy)cyclotriphosphazene (3) were obtained from the reactions of hexachloro- cyclotriphosphazene (1) with 5-bromosalicylaldehyde and 5-chlorosalicylaldehyde in the presence of (C₂H₅)₃N and K₂CO₃ at room temperature, respectively. The new two organocyclotriphosphazenes bearing formyl groups were reacted with 4-cyano aniline, 2-phenyl aniline, 4-aceto aniline, 5-chloro-2-hydroxy aniline, 2-hydroxy aniline, 4-hydroxy aniline, 2-(4-morpholino)ethyl amine, 4-carboxy aniline, 4-carbomoyl aniline, 2-mercapto aniline, and 5-amino isoquonoline to prepare cyclotriphosphazene derivatives containing a Schiff base at room temperature. However, fully phenoxy-substituted cyclotriphosphazenes containing a Schiff base were isolated from the reactions of the compound 2 and 3 with 5-chloro-2-hydroxy aniline, 2-hydroxy aniline, 4-hydroxy aniline, and 2-(4-morpholino)ethyl amine. The structures of the synthesized compounds were characterized by elemental analysis, IR, and NMR (¹H, ¹³C, ³¹P) spectroscopy. According to the results of the analysis, all synthesized compounds were found to be fully substituted organocyclotriphosphazenes, such as hexa[4-bromo-2-(5-chloro-2-hydroxy-pheyliminomethyl)phenoxy]cyclotriphosphaze (2a). All cyclotriphosphazene derivatives synthesized gave fluorescence emission peaks in range between 300 nm and 410 nm.     

Phosphorus-Nitrogen Compounds: Part 25. Syntheses,Spectroscopic, Structural and Electrochemical Investigations,Antimicrobial Activities,and DNA Interactions of Ferrocenyldiaminocyclotriphosphazenes

Abstract

The condensation reactions of hexachlorocyclotriphosphazene (N₃P₃Cl₆) with mono (1 and 2) and bisferrocenyldiamines (3–5 and 7) resulted in the formation of tetrachloro mono- (8 and 9) and bisferrocenylspirocyclotriphosphazenes (10–13). In addition the tetramorpholino mono- (8a and 9a) and bisferrocenylphosphazenes (10a–12a) were obtained from the reactions of the corresponding tetrachlorophosphazenes (8–12) with excess morpholine. The structures of all the phosphazenes were determined using FTIR, MS, ¹H, ¹³C, and ³¹P NMR and 2-dimensional NMR techniques. The structures of 9a and 13 were determined by single crystal X-ray diffraction techniques. Cyclic voltammetric investigations of compounds 8a, 9a, and 11a revealed that ferrocene redox centers undergo reversible oxidation. These ferrocenylphosphazenes appear to be quite robust electrochemically. Interactions between the compounds 8a, 9a, 11a, and 12a and pBR322 plasmid DNA were investigated by agarose gel electrophoresis.

[Supplementary materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfer, and Silicon and the Related Elements for the following free supplemental files: Additional text and figures.]     

DIBUTADIENYL PIPERAZINE,DIBUTADIENYL HOMOPIPERAZINES AND BUTADIENYL-SUBSTITUTED PIPERIDINES FROM MONOSUBSTITUTED HALODIENES

Compounds 3a–k were obtained from the reactions of compounds 1a–k with homopiperazine (2) in CH ₂ Cl ₂ . Compounds 1a–b, 1d–f, and 1h–l gave compounds 5a–b, 5d–f, and 5h–l with 2-methylpiperazine (4) in dichloromethane. Compounds 7c and 9c were obtained from the reactions of compound 1c with 4-ethoxycarbonyl piperazine (6) and 4-piperidinol (8) in CH ₂ Cl ₂ . Compounds 1a and 1f gave compounds 11a and 11f with 4-methylpiperazine (10), and compound 13f was obtained from the reactions of compound 1f with 4-methylpiperidine (12) in CH ₂ Cl ₂ .     

EPR study of gamma irradiated N-methyl taurine (C3H9NO3S) and sodium hydrogen sulphate monohydrate (NaHSO3·H2O) single crystals

EPR study of gamma irradiated C(3)H(9)NO(3)S and NaHSO(3).H(2)O single crystals have been carried out at room temperature. There is one site for the radicals in C(3)H(9)NO(3)S and two magnetically distinct sites for the radicals in NaHSO(3). The observed lines in the EPR spectra have been attributed to the species of SO(3)(-) and RH radicals for N-methyl taurine, and to the SO(3)(-) and OH radicals for sodium hydrogen sulfate monohydrate single crystals. The principal values of the g for SO(3)(-), the hyperfine values of RH and OH proton splitting have been calculated and discussed.