Preparation and characterization of Co(II), Ni(II) and Cu(II) complexes of a ligand containing 1,3,4-thiadiazole groups

(1R,2R)-1,2-bis-(5-amino-1,3,4-thiadiazole-2-yl)ethane-1,2-diol (L) has been prepared by the reaction of thiosemicarbazide with (2R,3R)-(+)-tartaric acid (I) and phosphorous oxychloride, and its complexes with Co(II), Ni(II) and Cu(II) have been obtained. The structures of the ligand and its complexes have been established by i. r., ¹H- and ¹³C-n.m.r. spectra, u.v.–vis–nir spectroscopy, elemental analyses, T.g.-D.t.a. and magnetic susceptibility measurements.     

New 6-(4-Bromophenyl)-imidazo[2,1-b]thiazole Derivatives: Synthesis and Antimicrobial Activity

Summary.  New 4-alkyl/aryl-1-((6-(4-bromophenyl)-imidazo[2,1-b]thiazol-3-yl)-acetyl)-3-thiosemicarbazides and 3-alkyl/aryl-2-(((6-(4-bromophenyl)-imidazo[2,1-b]thiazol-3-yl)-acetyl)-hydrazono)-4-thiazolidinones were synthesized from 6-(4-bromophenyl)-imidazo[2,1-b]thiazole-3-acetic acid hydrazide. Their structures were elucidated by elemental analyses and spectroscopic data. All compounds were tested for antibacterial and antifungal activities. The antimicrobial activities of the compounds were assessed by the microbroth dilution technique. The compounds were also evaluated for antituberculosis activity against Mycobacterium tuberculosis H₃₇Rv (ATCC 27294); they exhibited varying degrees of inhibition in the in vitro primary screening at 6.25 μg · cm⁻³. The most active compound was 3-(4-nitrophenyl)-2-(((6-(4-bromophenyl)-imidazo[2,1-b]thiazol-3-yl)-acetyl)-hydrazono)-4-thiazolidinone. Corresponding author. E-mail: nurayulusoy@yahoo.com Received December 10, 2001. Accepted (revised) March 1, 2002     

The Synthesis of Novel Methotrexate-like Compounds

Summary. Methotrexate (MTX) is a folate antagonist used in treatment of several chronic inflammatory and neoplastic conditions. In this study, new MTX-like compounds that may-be potential anticancer agents were synthesized and their structures were determined by IR, UV, GC-MS, ¹H NMR, and ¹³C NMR spectra. Also, in this study, a series structurally related to MTX or folate analogous compounds were evaluated whether they have inhibitory properties on the dihydrofolate reductase activity (DHFR).     

Co(II), Ni(II) and Cu(II) complexes of 1,4-di-(1-hydroxyimino-2-phenyl-2-oxo-ethylamino)benzene

The ligand has been prepared from ω-chloroisonitrosoacetophenone and 1,4-phenylenediamine in the presence of NaHCO₃. The ligand have a C=O group and an –NH–R group adjacent to the oxime group. The Ni(II), Cu(II) and Co(II) complexes of the synthesized ligand were prepared and their structures were identified using FTIR, UV-Vis spectral data, elemental analysis, thermal analysis and magnetic moment measurements. The metal-ligand ratios were found to be 3:2. The ligands were found to coordinate to the metal ions via the oxime nitrogen, oxime oxygen, one of the carbonyl group and amide nitrogen atoms. Thermal analyses data reveals that the water in the complexes was found to be non-coordinated to the metal ions. In the trinuclear structures, the metals have the tetrahedral environments.     

Alcohol-soluble functional vic-dioxime bearing alcoholhexylsulfanyl moieties: preparation, spectroscopy and electrochemistry

A new alcohol soluble functionalized vic-dioxime, bis-[(1-hydroxyhexyl)-(8,9-hydroxyimino)-7,10-dithiahexacosane (LH₂), and its alcohol-soluble mono and dinuclear complexes (Ni^II, Cu^II, Co^II, Mn^II, Pd^II and UO ₂ ^II ) have been prepared from 6-mercapto-1-hexanol and (E,E)-dichloroglyoxime under high dilution basic conditions. Reactive polyalcohol moieties appended at the periphery of the oxime containing two different heteroatoms (S-, O-), serve as a weak exocyclic binding sites for Pd^II and Ag^I metal ions and also provide solubility for the vic-dioxime complexes in low molecular-weight alcohols. Both mono-nuclear (LH)₂M and homodinuclear (LH)₂(UO₂)₂(OH)₂ and heterotrinuclear (LH)₂MM ₂ ^′ Xn, where M = Co^II M′ = Pd^II, X = Cl⁻, n = 4 and Ag^I X = NO ₃ ⁻ , n = 2) complexes have been obtained with a 1:2, 2:2, 3:2 metal/ligand ratio, respectively. Electronic spectra of the modified vic-dioximes exhibit monitorable changes in UV. All mono and dinuclear-complexes are soluble in common organic solvents. The elemental analysis, ¹H-n.m.r, i.r., u.v–vis, and f.a.b.–m.s data and by cyclic and differential pulse voltammetry measurements are presented.     

Voltammetric methods of reboxetine analysis and the mechanism of its electrode reactions

Reboxetine (RBX) electrochemical redox behavior at hanging mercury drop (HMDE) and glassy carbon electrodes (GCE) was studied in various pH Britton-Robinson universal buffers using cyclic voltammetry and square-wave voltammetry. RBX was reduced at the HMDE and oxidized at the GCE with reversible adsorption controlled and irreversible diffusion controlled processes respectively. The anodic peak is due to the amine and the cathodic peak may correspond to oxygen protonation. An oxidation reaction mechanism is proposed. The linear relation between peak currents and RBX concentration allowed simple, sensitive, precise and inexpensive voltammetric procedures to be developed. The limit of detection was 0.04 µM RBX. The procedures were successfully applied to human urine and RBX tablet assay. Therapeutic RBX concentrations in human serum were not detected due to strong drug-protein binding. Using bovine serum albumin, the methods were used to investigate the effect of serum protein binding on RBX determination.      

Optimization of chemical and instrumental parameters in hydride generation laser-induced breakdown spectrometry for the determination of arsenic,antimony, lead and germanium in aqueous samples

A laser induced breakdown spectrometry hyphenated with on-line continuous flow hydride generation sample introduction system, HG-LIBS, has been used for the determination of arsenic, antimony, lead and germanium in aqueous environments. Optimum chemical and instrumental parameters governing chemical hydride generation, laser plasma formation and detection were investigated for each element under argon and nitrogen atmosphere. Arsenic, antimony and germanium have presented strong enhancement in signal strength under argon atmosphere while lead has shown no sensitivity to ambient gas type. Detection limits of 1.1 mg L⁻¹, 1.0 mg L⁻¹, 1.3 mg L⁻¹ and 0.2 mg L⁻¹ were obtained for As, Sb, Pb and Ge, respectively. Up to 77 times enhancement in detection limit of Pb were obtained, compared to the result obtained from the direct analysis of liquids by LIBS. Applicability of the technique to real water samples was tested through spiking experiments and recoveries higher than 80% were obtained. Results demonstrate that, HG-LIBS approach is suitable for quantitative analysis of toxic elements and sufficiently fast for real time continuous monitoring in aqueous environments.     

Investigation of Some Functionalization Reactions of 4‐Benzoyl‐5‐phenyl‐1‐(4‐methoxyphenyl)‐1H‐pyrazole‐3‐carbonyl Chloride and Their Antimicrobial Activity

The 1H‐pyrazole‐3‐carboxylic acid 1 was converted via reactions of its acid chloride 3 with various asymmetrical disubstituted urea and alcohol derivatives into the corresponding novel 4‐benzoyl‐N‐(N′,N′‐dialkylcarbamyl)‐1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐pyrazole‐3‐carboxamide 4a , b and alkyl 4‐benzoyl‐1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐pyrazole‐3‐carboxylate 7a‐c , respectively, in good yields (57%‐78%). Friedel‐Crafts reactions of 3 with aromatic compouns for 15 min.‐2 h led to the formation of the 4‐3‐diaroyl‐1‐(4‐hydroxyphenyl)‐5‐phenyl‐1H‐pyrazoles 9a‐c , 4‐benzoyl‐1‐(4‐methoxyphenyl)‐3‐aroyl‐5‐phenyl‐1H‐pyrazoles 10a , b and than from the acylation reactions of 9a‐c were obtained the 3,4‐diaroyl‐1‐(4‐acyloxyphenyl)‐5‐phenyl‐1H‐pyrazoles 13a‐d . The structures of all new synthesized compounds were established by NMR experiments such as ¹H, and ¹³C, as well as 2D COSY and IR spectroscopic data, and elemental analyses. All the compounds were evaluated for their antimicrobial activities (agar diffusion method) against eight bacteria and two yeasts.     

The Pharmacokinetic Profiles of Pre-Operative Prophylactic Cefepime Application in Pregnant and Non-Pregnant Women Undergoing Surgical Interventions Using a Fully Validated Liquid Chromatographic Method

Pregnancy alters pharmacokinetic profile of many drugs, because of altering body volume and metabolism rate. Therefore, dosage rates and concentrations of drugs must be controlled during pregnancy. Here, we identified the pharmacokinetic profile of pre-operatively given cefepime in caesarean section and gynecological operations using a simple, rapid, cost-effective and valid liquid chromatographic method. The chromatographic separation was performed using 40 mM, pH 3.2 phosphate buffer containing 6 % methanol as mobile phase at 0.30 mL min^?1 flow rate. Gradient elution with methanol was applied to get shorter analysis time without any interference from plasma endogens. During analyses, temperature of column, autosampler and detector were set as 30, 10 and 40 °C, respectively. The detection wavelength was 260 nm and ceftizoxime was used as internal standard. At the optimum conditions, the cefepime analysis from plasma samples was completed in 7 min. Cefepime was extracted from plasma samples using perchloric acid with a very high recovery rate (99.3 %). The method was fully validated according to the Food and Drug Administration guidelines for bioanalytical method validation, and found to be selective, linear, repeatable, reproducible and robust. After validation studies, the method was applied to five caesarean-sectioned and four non-pregnant sectioned women treated with pre-operative, prophylactic single intravenous dose of cefepime (1 g Maxipime^®) in order to determine pharmacokinetic profile of cefepime. Peak serum concentrations of cefepime in caesarean-sectioned women at the arterial port after infusion was 70.11 ± 10.74 μg mL^?1. The mean elimination half-life, volume of distribution and calculated area under the concentration–time curve (AUC)_0–∞ were 1.10 ± 0.23 h, 14.22 ± 2.29 L and 101.55 ± 10.99 μg h mL^?1 for caesarean-sectioned women; and 1.14 ± 0.21 h, 14.76 ± 2.92 L and 104.71 ± 36.34 μg h mL^?1 for non-pregnant sectioned women, respectively. The area under curve, elimination half-life, maximum plasma concentration and the mean distribution volume of cefepime were not changed in case of pregnancy.     

Synthesis of 2,3‐Dihydro‐4H‐furo[3,2‐c] chromen‐4‐ones and 2,3‐Dihydronaphtho[2,3‐b]furan‐4,9‐diones by the Radical Cyclizations of Hydroxyenones with Electron-Rich Alkenes using Manganese(III) Acetate

We have obtained dihydrofurans 3a–j in the radical cyclization of 4‐hydroxycoumarin 1a and 2‐hydroxy‐1,4‐naphtoquinone 1b with electron rich alkenes 2a–i by manganese(III) acetate. Methods A and B, which have different molar ratios were studied comparatively in these reactions, and we observed that method B (molar ratio 2:1:3) gave the best results. Treatment of 4‐hydroxycoumarin 1a and electron rich alkenes 2a–e gave 2,3‐dihydro‐4H‐furo[3,2‐c]chromen‐4‐ones 3a–e in 36–86% yields by the method B. Under the same conditions, the reactions of 2‐hydroxy‐1,4‐naphtaquinone 1b with conjugated alkenes 2b and 2f–i afforded 2,3‐dihydronaphtho[2,3‐b]furan‐4,9‐diones 3f–j in an excellent yields.