Ethanol/water pulp enzymatic pretreatment: Chemical and FTIR-PCA analyses

Pulps obtained from ethanol/water cooking of sugarcane bagasse were treated at different times using xylanase enzyme obtained from Thermomyces lanuginosus IOC-4145 or commercially (Cartazyme HS, Sandoz Products Ltd.). The enzyme dosage was 18 IU per g of dry pulp and the time varied from 4 h to 12 h. When xylanase from T. lanuginosus was used, the kappa number and viscosity improved independently of the processing time used (4 h, 8 h, and 12 h). After chemical evaluation, the obtained pulps were classified using Fourier Transformed Infra-Red Spectroscopy and Principal Component Analysis. The results showed that the first three principal components explained more than 90 % of the total variance of the pulp spectra.     

Cooperative effects in phospholipid monolayers induced by a peptide from HIV-1 capsid protein

The study of interactions between biological molecules and model membranes is essential for the understanding of a number of physiological mechanisms involved in viral infections and dissemination. In this paper, the analysis of the interaction between a peptide from the p24 protein of Human Immunodeficiency Virus type 1 (HIV-1) and a phospholipid monolayer has pointed to a cooperative response in which very small amounts of peptide p24-1 (e.g. 0.05 mol%) can lead to measurable effects. Monolayer surface pressure and surface potential isotherms were affected for peptide concentrations as low as 0.05 mol%, with saturation at 0.5 mol%. The expansion effect from p24-1 is confirmed by changes in morphology of the monolayers using Brewster angle microscopy. Even though p24-1 is disordered in aqueous solutions, the interaction with dipalmitoyl phosphatidylcholine (DPPC) causes it to adopt an alpha-helix structure, as shown by circular dichroism (CD) data for multilamellar vesicles (MLV). The expansion of the phospholipid monolayer in a cooperative way may imply that p24-1 has potential antiviral activity, by participating in the cell rupture, with no need of specific receptors in the membrane.     

Decomposition of protonated noradrenaline and normetanephrine assisted by NH2 migration studied by electrospray tandem mass spectrometry and molecular orbital calculations

As part of a research program on neurotransmitters in a biological fluid, the fragmentations characterising catecholamines protonated under electrospray ionisation (ESI) conditions, under low collision energy in a triple-quadrupole mass spectrometer, were investigated. The decompositions of protonated noradrenaline (VH) and normetanephrine (VIH) were studied. Both precursor ions eliminate first H2O at very low collision energy, and the fragmentations of [MH-H2O]+ occur at higher collision energy. The breakdown graphs of [MH-H2O]+ ions, with collision energy varying from 0-40 eV in the laboratory frame, are presented. [VIH-H2O]+ ions lose competitively NH3 and CH3OH. For [VH-H2O]+ the loss of NH3 is dominant while H2O is eliminated at very low abundance at all collision energies. All of these secondary fragmentations are followed at higher collision energies by elimination of CO. These fragmentations are interpreted by means of ab initio calculations up to the B3LYP/6-311+G(2d,2p) level of theory. The elimination of H2O requires first the isomerisation of N-protonated forms, chosen as energy references, to O-protonated forms. The isomerisation barriers are calculated to be lower than 81 kJ/mol above the N-protonated forms. The elimination of NH3 from [MH-H2O]+ requires first the migration, via a cyclisation, of the amine function from the linear chain to the aromatic ring in order to prevent the formation of unstable disubstituted carbocations in the ring. The barriers associated with the loss of NH3 are located 220 and 233 kJ/mol above VH and 219 kJ/mol above VIH. The energy barrier for the loss of ROH is located 236 and 228 kJ/mol above VH and VIH, respectively. The absence of ions corresponding to [VH-2H2O]+ is due to a parasitic mechanism with an activation barrier lower than 236 kJ/mol that leads to a stable species unable to fragment, thus preventing the second loss of H2O. Losses of CO following the secondary fragmentations involve activation barriers higher than 330 kJ/mol.     

Spectrophotometric determination of samarium(III) with chrome azurol S in the presence of cetylpyridinium chloride

A sensitive, simple method for the determination of trace amounts of samarium by spectrophotometry is described based on the formation of the samarium-chrome azurol S (CAS) complex in micellar medium. The molar absorptivities of the complexes at pH 7.5 at 505 nm were 3.6x10(4) and 1.4x10(5) l mol(-1) cm(-1) for water media and cetylpyridinium chloride (CPC), respectively. Beer's law is obeyed from 0.05-2 mg l(-1) of samarium at 505 nm as Sm-CAS-CPC complex. Optimal conditions such as reagent amounts, and pH for the samarium determination were reported. The effects of foreign ions were also investigated. The proposed method was successfully applied to the determination of samarium contents in synthetic samples.     

Vapor‐Phase Reaction of Citronellal over Mesoporous Molecular Sieves MCM‐41 and Zeolites

The vapor‐phase reaction of citronellal (CTN) at 220 °C and atmospheric pressure has been studied using mesoporous molecular sieves and zeolites in a fixed‐bed reactor. The primary products included isopulegol (IPG), menthone, and pulegol with subsequent reactions to form cyclic hydrocarbons. The CTN conversion and the product selectivity depend on the acidity and the textural property of catalysts. Lewis and/or Brönsted acid sites are essential for catalyzing this reaction. An increase of SiO₂/Al₂O₃ mol ratio diminishes the acid amount of all catalysts and enhances both the surface area and the structural order of MCM‐41. The catalytic activity follows the order of MCM‐41 > HZSM‐5 > Hβ > USY, in accordance with the relative total acid amount except that of MCM‐41. Despite its low acidity, Si‐MCM‐41 exhibits the best catalytic performance due to its uniform mesopores, large surface area and good stability; the CTN conversion and the IPG yield attain 91.9% and 58.6%, respectively, after at least 25 h time‐on‐stream.     

Osteoprotegerin is present on the membrane of osteoclasts isolated from mouse long bones

Osteoprotegerin (OPG), a member of the tumor necrosis factor receptor superfamily, is known to inhibit osteoclastogenesis by acting as a soluble decoy receptor for the receptor activator of NF-kappaB ligand (RANKL). We report the presence of OPG on the membrane of osteoclasts and the possibility of the direct action of OPG on them. Highly pure osteoclast precursors were isolated from mouse long bones and induced to differentiate into mature osteoclasts by M-CSF and soluble RANKL (sRANKL). The presence of OPG on the membrane of these cells was confirmed by western blotting and immunostaining. Furthermore, sRANKL was found to be bound to the OPG on the osteoclast precursors. These results suggest that OPG might have a new role during the differentiation of osteoclasts beyond its role as a soluble decoy receptor. The mechanism of the existence of OPG on osteoclast precursors remains to be found.     

Selective transport of cesium ion in polymeric CTA membrane containing calixcrown ethers

A series of calixcrown ethers for which the cavity size of the crown ring is varied from crown-6 to crown-7 to crown-8 were examined for the transport abilities toward alkali metal ions. These ligands were incorporated into supported liquid membranes (SLMs) and into polymer inclusion membranes (PIMs) composed of cellulose triacetate (CTA) as a support and 2-nitrophenyl octyl ether (NPOE) and tris(2-butoxyethyl) phosphate (TBEP) as a plasticizer. In both membrane systems, calixcrown-6 showed the best selectivity toward a cesium ion over other alkali metal ions. The polymeric CTA membrane showed more rapid transport rate as well as higher durability than did the SLMs.     

Electron-stimulated desorption from ionic crystal surfaces

Inelastic interactions of electrons with surfaces of ionic crystals result in emission of various particles such as ions, atoms and molecules. We will review such electron-stimulated desorption processes for the particular class of ionic crystals, namely for alkali halides. In this case, a dominant fraction of the emission is in the form of halogen and alkali atoms characterized by a thermal (Maxwellian) spectrum of translational energies. For several alkali halides (potassium and rubidium chlorides, bromides, and iodides), however, a significant part of the halogen atoms is ejected with nonthermal energies, i.e. energies of the order of 0.1 eV. The results of recent systematic studies of angular-resolved kinetic energy distributions of the emitted particles will be reported and current views on the electronic mechanisms of desorption will be described. In particular, it will be shown that the ESD mechanism can be understood in terms of the model involving a surface localisation of the so called “hot-holes” created by electron bombardment of alkali halides. A role of hot holes in ESD processes will further be discussed in relation to very recent experimental results obtained for the KBr crystals doped with In impurities which act as efficient hole traps.     

Synthesis and molecular structure of methyl 4-O-methyl-alpha-D-glucopyranuronate

A method for the preparation of methyl 4-O-methyl-alpha-D-glucopyranuronate and its single crystal X-ray structure determination are reported. The molecule adopts an almost ideal (4)C1 ((degree)C3) conformation.     

Surface Characterization of Sepiolite by Inverse Gas Chromatography

Inverse gas chromatography (IGC) was applied to characterize the surface of sepiolite. The adsorption thermodynamic parameters (the standard enthalpy (ΔH ⁰), entropy (ΔS ⁰) and free energy of adsorption (ΔG ⁰)), the dispersive component of the surface energy (γ _S ^d ), and the acid/base character of sepiolite surface were estimated by using the retention time of different non-polar and polar probes at infinite dilution region. The specific free energy of adsorption (ΔG ^sp ), the specific enthalpy of adsorption (ΔH ^sp ), and the specific entropy of adsorption (ΔS ^sp ) of polar probes on sepiolite were determined. ΔH ^sp were correlated with the donor and modified acceptor numbers of the probes to quantify the acidic K _A and the basic K _D parameters of the sepiolite surface. The values obtained for the parameters K _A and K _D indicated an acidic character for sepiolite surface.