Solubility and Stability of Some Pharmaceuticals in Natural Deep Eutectic Solvents-Based Formulations

Some medicines are poorly soluble in water. For tube feeding and parenteral administration, liquid formulations are required. The discovery of natural deep eutectic solvents (NADES) opened the way to potential applications for liquid drug formulations. NADES consists of a mixture of two or more simple natural products such as sugars, amino acids, organic acids, choline/betaine, and poly-alcohols in certain molar ratios. A series of NADES with a water content of 0–30% (w/w) was screened for the ability to solubilize (in a stable way) some poorly water-soluble pharmaceuticals at a concentration of 5 mg/mL. The results showed that NADES selectively dissolved the tested drugs. Some mixtures of choline-based NADES, acid-neutral or sugars-based NADES could dissolve chloral hydrate (dissociated in water), ranitidine·HCl (polymorphism), and methylphenidate (water insoluble), at a concentration of up to 250 mg/mL, the highest concentration tested. Whereas a mixture of lactic-acid–propyleneglycol could dissolve spironolacton and trimethoprim at a concentration up to 50 and 100 mg/mL, respectively. The results showed that NADES are promising solvents for formulation of poorly water-soluble medicines for the development of parenteral and tube feeding administration of non-water-soluble medicines. The chemical stability and bioavailability of these drug in NADES needs further studies.     

Morphological characterization of elastin-mimetic block copolymers utilizing cryo- and cryoetch-HRSEM.

Elastin-mimetic block copolymers were produced by genetic engineering. Genetically driven synthesis permitted control of the final physiochemical characteristics of the block copolymers. We designed BB and BAB block copolymers in which the A-block was hydrophilic and the B-block was hydrophobic. By designing the copolymers in this manner, it was proposed that they would self-assemble into micellar aggregates that, at high concentration, would form thermoreversible hydrogels. To analyze the three-dimensional fine surface morphology of the copolymers, to the resolution level of a few nanometers, we employed cryo-HRSEM. This method provided vast expanses of the specimen in its frozen hydrated state for survey. In our initial cryo-HRSEM studies, we observed the protein filaments and micelles surrounded by lakes of vitreous ice. Upon examination at low and intermediate magnifications, there was an extensive honeycomb-like filamentous network. To delineate the fine morphology of the hydrogel network at high magnification and to greater depths, we cryoetched away unbound water from the sample surface, in high vacuum, prior to chromium deposition. By using this technique, we were able to visualize for characterization purposes the fine fibril networks formed from the micellar aggregates over the surface of the hydrogel.     

Hydrogen bonding in redox-modulated molecular recognition. An experimental and theoretical investigation

Two receptors, a diaminotriazine derivative (DAT) and diamidopyridine (DAP), are complementary to the electroactive naphthalimide (N) through three-point hydrogen bonding. The association constants of the two receptors were evaluated for both the fully oxidized and the radical anion forms of N. In the oxidized state, the two receptors displayed identical binding constants. Diamidopyridine, however, lowers the reduction potential of naphthalimide to a far greater extent than does diaminotriazine, indicating a greater affinity for diamidopyridine by naphthalimide in the radical anion form. This behavior was mirrored by EPR experiments that showed small deviations from the hyperfine coupling pattern of N(red) in the presence of DAT, with greater effects seen for the N(red).DAP complex. Computational simulations using the UB3LYP/6-311+G(d,p)//UHF/6-31G(d) hybrid gave theoretical hyperfine constants in good quantitative agreement with the experimental results. Using this correlation, we determined that electrostatics and hydrogen bond polarizability play key roles in controlling redox-modulated molecular recognition.     

Enzyme electrokinetics: electrochemical studies of the anaerobic interconversions between active and inactive states of Allochromatium vinosum [NiFe]-hydrogenase

The cycling between active and inactive states of the catalytic center of [NiFe]-hydrogenase from Allochromatium vinosum has been investigated by dynamic electrochemical techniques. Adsorbed on a rotating disk pyrolytic graphite "edge" electrode, the enzyme is highly electroactive: this allows precise manipulations of the complex redox chemistry and facilitates quantitative measurements of the interconversions between active catalytic states and the inactive oxidized form Ni(r) (also called Ni-B or "ready") as functions of pH, H(2) partial pressure, temperature, and electrode potential. Cyclic voltammograms for catalytic H(2) oxidation (current is directly related to turnover rate) are highly asymmetric (except at pH > 8 and high temperature) due to inactivation being much slower than activation. Controlled potential-step experiments show that the rate of oxidative inactivation increases at high pH but is independent of potential, whereas the rate of reductive activation increases as the potential becomes more negative. Indeed, at 45 degrees C, activation takes just a few seconds at -288 mV. The cyclic asymmetry arises because interconversion is a two-stage reaction, as expected if the reduced inactive Ni(r)-S state is an intermediate. The rate of inactivation depends on a chemical process (rearrangement and uptake of a ligand) that is independent of potential, but sensitive to pH, while activation is driven by an electron-transfer process, Ni(III) to Ni(II), that responds directly to the driving force. The potentials at which fast activation occurs under different conditions have been analyzed to yield the potential-pH dependence and the corresponding entropies and enthalpies. The reduced (active) enzyme shows a pK of 7.6; thus, when a one-electron process is assumed, reductive activation at pH < 7 involves a net uptake of one proton (or release of one hydroxide), whereas, at pH > 8, there is no net exchange of protons with solvent. Activation is favored by a large positive entropy, consistent with the release of a ligand and/or relaxation of the structure around the active site.     

Poly(butyl methacrylate-g-methoxypoly(ethylene glycol)) and poly(methyl methacrylate-g-methoxypoly(ethylene glycol)) graft copolymers: preparation and aqueous solution properties

A series of water-soluble, amphiphilic graft copolymers has been prepared by free-radical copolymerization of methoxypoly(ethylene glycol) macromonomers, with either methyl methacrylate or butyl methacrylate as the comonomers, in water/ethanol solvent mixtures. Lower molecular weight copolymers were obtained by increasing the concentration of the initiator, azobisisobutyronitrile (AIBN), used in the polymerization reaction. However, the route used also led to the formation of significant quantities of tetramethylsuccinodinitrile, a toxic byproduct resulting from the cage reaction of AIBN. Static fluorescence measurements using pyrene as a probe, along with 1H NMR experiments, showed that the graft copolymers form aggregates in water at very low concentrations (approximately 0.01 g l(-1)) with the pendant hydrophilic graft chains forming a stabilizing shell around the hydrophobic backbone. An increase in the hydrophile-lipophile balance of the graft copolymers was found to lead to smaller aggregates with lower aggregation numbers and highly swollen hydrophilic shells, as revealed by small angle neutron scattering (SANS).     

In-lens cryo-high resolution scanning electron microscopy: methodologies for molecular imaging of self-assembled organic hydrogels.

The micro- and nanoarchitectures of water-swollen hydrogels were routinely analyzed in three dimensions at very high resolution by two cryopreparation methods that provide stable low-temperature specimens for in-lens high magnification recordings. Gemini surfactants (gS), poly-N-isopropylacrylamides (p-NIP Am), and elastin-mimetic di- (db-E) and triblock (tb-E) copolymer proteins that form hydrogels have been routinely analyzed to the sub-10-nm level in a single day. After they were quench or high pressure frozen, samples in bulk planchets were subsequently chromium coated and observed at low temperature in an in-lens field emission SEM. Pre-equilibrated planchets (4-40 degrees C) that hold 5-10 microl of hydrogel facilitate dynamic morphological studies above and below their transition temperatures. Rapidly frozen samples were fractured under liquid nitrogen, low-temperature metal coated, and observed in-lens to assess the dispersion characteristics of micelles and fragile colloidal assemblies within bulk frozen water. Utilizing the same planchet freezing system, the cryoetch-HRSEM technique removed bulk frozen water from the hydrogel matrix by low-temperature, high-vacuum sublimation. The remaining frozen solid-state sample faithfully represented the hydrogel matrix. Cryo- and cryoetch-HRSEM provided vast vistas of hydrogels at low and intermediate magnifications whereas high magnification recordings and anaglyphs (stereo images) provided a three-dimensional prospective and measurements on a molecular level.     

The pyridyl-tag strategy applied to the hydrocarbon/perfluorocarbon phase-switching of a porphyrin and a fullerene

A new hydrocarbon/perfluorocarbon phase-switching strategy based on coordination of pyridyl-tagged molecules to a highly fluorinated dicopper-carboxylate complex possessing two accessible axial coordination sites is described. When a chloroform solution of the tetrapyridyl-substituted porphyrin 3 (0.1 mM, 2 mL) is layered on a perfluorodecalin solution of 2 (3.25 mM, 1.5 mL), complete extraction of the porphyrin into the fluorous phase is observed after 30 min of stirring. Quantitative release of both the porphyrin and 2 is achieved simply by adding excess THF to the biphasic system, the THF acting as a pyridine competing ligand. The recovered perfluorocarbon solution containing 2 can be reused for another complexation with the same efficiency. The scope of this approach is emphasized by the phase-switching of a dipyridyl-substituted fullerene, another example of a molecule for which solubilization in perfluorocarbons is very challenging.     

Oxidation of organic sulfides by vanadium haloperoxidase model complexes

In addition to halide oxidation, the vanadium haloperoxidases are capable of oxidizing sulfides to sulfoxides. Four vanadium complexes with tripodal amine ligands, K[VO(O(2))(heida)] (1), VO(2)(bpg) (2), K[VO(2)(ada)] (3), and K(2)[VO(O(2))(nta)] (4), previously shown to perform bromide oxidation (Colpas, G. J.; Hamstra, B. J.; Kampf, J. W.; Pecoraro, V. L. J. Am. Chem. Soc. 1996, 118, 3469-3477), have now been shown to oxidize aryl alkyl sulfides to the corresponding sulfoxides. The oxidation was observed by the disappearance of thioanisole's ultraviolet absorption at 290 nm, by the change in the aromatic region of the (1)H NMR spectrum of the sulfides, and by changes in the complexes' (51)V NMR spectra. The amount of methyl phenyl sulfide oxidized in 3 h was 1000 equiv (per metal complex). The oxidation product is almost exclusively sulfoxide, with very little sulfone (less than 3% over a 3 h experiment) formed. This is consistent with an electrophilic oxidation mechanism, as had been proposed for oxidation of bromide by 1-4. The rate was found to be first order in substrate concentration, similar to the rate law observed for bromide oxidation. Unlike the bromide oxidation, the equivalent of acid required for peroxovanadium complex activation is not consumed. The complexes 1-4 are not reactive with styrene or cyclooctene. The relevance of these reactions to the mechanism of the vanadium haloperoxidases and, more generally, peroxovanadium oxygenation of sulfides will be discussed.