Copper(II) complexes with pyridine-2,6-dicarboxylic acid from the oxidation of copper(I) iodide

Via an oxidation reaction of Cu(I) iodide with pyridine-2,6-dicarboxylic acid (H₂L) in DMF three copper(II) complexes, [(CH₃)₂NH₂]₂[CuL₂] (1), K₂[CuL₂]?H₂L?H₂O (2) and [Cu(L)(H₂O)]_n (3), were synthesized and characterized. The structures of 1–3 were determined by single crystal X-ray diffraction studies. In-situ DMF decomposition produces dimethylamine base under solvothermal conditions and a proton transfer reaction takes place for the complex formation of 1. 3-D networks are stabilized in 1 and 2 via hydrogen bonds. Complex 3 is a 1-D coordination polymer with Cu-O semi-coordination bonds. Thermal decomposition of the complexes results in the corresponding metal oxides. Also, the electrochemical behavior of 1 was determined to be a metal-centered and diffusion-controlled, one-electron reduction process.     

Sol–gel synthesis of IPTES and D10H consisting fluorinated silane system for hydrophobic applications

In this study, new fluorinated silane system was prepared by adding hydroxyl terminated Fluorolink D10H oligomer to 3-isocyanatopropyltrietoxysilane. The obtained silane system was independently composed with 3-Glycidyloxypropyltrimethoxysilane and 3-Glycidyloxy-propyltriethoxysilane. Then the prepared two different coating solutions were applied to glass surface by spin-coating method. The chemical bonding between groups in system was investigated by FTIR analysis. The elemental composition of coatings was determined by using EDX analysis. Their structure and surface properties were analyzed by scanning electron microscopy, atomic force microscopy, contact angle measurement and UV–vis spectrophotometer. The amounts of fluorine on the coatings prepared with IPTES-D10H-GLYEO and IPTES-D10H-GLYMO were 33 and 34 %wt, respectively. Transparent coatings with smooth surface and uniform thickness were obtained. The coatings had nanoscale roughness. The contact angles of coatings for water were range from 103° to 110°, and for n-hexadecane were range from 59° to 62°.     

Synthesis,structural, spectral,thermal and comparative biological activity studies of [V<Subscript>2</Subscript>O<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>]

The hydrothermal reaction of a mixture of V₂O₅, VCl₃, 2,5-pyridinedicarboxylic acid and diluted H₂SO₄ for 68 h at 180°C gives a blue colored solution which yields prismatic blue crystals of IV ₂ ^IV O₂(SO₄)₂(H₂O)₆] (1) in 32% yield (based on V). Complex 1 was investigated by means of elemental analysis (C, H and S), TGA, FT-IR, manganometric titration, Single Crystal X-ray Diffraction Methods and also comparative antimicrobial activities. Crystal data for the compound: monoclinic space group P2₁/c and unit cell parameters are a = 7.3850(12) Å, b = 7.3990(7) Å, c = 12.229(2) Å, β = 108.976(12)° and Z = 2. Although structure of 1 as a natural mineral has been previously determined, this work covers new preparation method and full characterization of 1 along with comparison of antibacterial activity between 1 and the commercial vanadium(IV) oxide sulfate hydrate compounds, VOSO₄ · xH₂O (Riedel-de Haën and Alfa Aesar brand names). 1 was evaluated for the antimicrobial activity against gram-positive, gram-negative bacteria, yeasts and mould compared with the commercial VOSO₄ · xH₂O compounds. 1 showed weak activity against bacteria Bacillus cereus, Nocardia asteroides and yeast Candida albicans. A good antimicrobial activity was recorded against Cirtobacter freundii (15 mm). There are only a few reproducible well-defined vanadium(IV) starting materials to use for exploring the synthesis of new materials. VCl₄, VO(acac)₂, VOSO₄ · xH₂O and [V(IV)OSO₄(H₂O)₄] · SO₄ · [H₂N(C₂H₄)₂NH₂] are common starting materials for such applications. In addition to these compounds, 1 can be used as an oxovanadium precursor.     

Electrical and interface state density properties of polyaniline–poly-3-methyl thiophene blend/p-Si Schottky barrier diode

We have formed conjugated polymeric aniline–thiophene organic material on p-Si substrate by adding polyaniline–poly-3-methyl thiophene blend solution in acetonitrile on top of a p-Si substrate and then evaporating the solvent. It has been seen that the forward bias current–voltage (I–V) characteristics of polyaniline–poly-3-methyl thiophene blend/p-Si/Al with a barrier height value of 0.60 eV and an ideality factor value of 3.37 showed rectifying behaviour at room temperature. The polyaniline–poly-3-methyl thiophene blend/p-Si/Al Schottky barrier diode showed non-ideal I–V behaviour with the value of ideality factor greater than unity that could be ascribed to the interfacial layer, interface states and series resistance. Furthermore, Cheung's functions and modified Norde's function were used to extract the diode parameters including ideality factor, barrier height and series resistance. It has been seen that there is a good agreement between the barrier height values from all methods. However, the values of series resistance obtained from Cheung's functions is higher than the values obtained from Norde's functions. The energy distribution of interface states density, determined from forward bias current–voltage (I–V) characteristic technique at room temperature, increases exponentially with bias from 2.81 × 10¹⁶ cm^?2 eV^?1 in (0.73–E_v) eV to 1.14 × 10¹⁷ cm^?2 eV^?1 in (0.48–E_v) eV.     

Synthesis, spectroscopic and electrochemical characteristics of a novel Schiff-base from saccharin and tryptophan

In the present work, a novel Schiff-base was synthesized by the reaction of saccharin with tryptophan and characterized by elemental analysis as well as UV-Vis, FT-IR, ¹H NMR spectroscopic data. The voltammetric behavior of Schiff-base was also studied on the hanging mercury drop electrode (HMDE) by using Square-Wave Voltammetry (SWV) and Cyclic Voltammetry (CV) techniques. The voltammograms of the Schiff-base exhibited two irreversible reduction peaks in Britton-Robinson buffer (pH 7.0–10.0) for the potential range from 0.0 V to ?1.4 V. These peaks which appeared at more positive potentials than the reduction peaks of tryptophan and saccharin, may be assigned to the cathodic reductions of C-N⁺ and >C=N- moieties of Schiffbase.     

Numerical simulation of partially coherent broadband optical imaging using the finite-difference time-domain method

Rigorous numerical modeling of optical systems has attracted interest in diverse research areas ranging from biophotonics to photolithography. We report the full-vector electromagnetic numerical simulation of a broadband optical imaging system with partially coherent and unpolarized illumination. The scattering of light from the sample is calculated using the finite-difference time-domain (FDTD) numerical method. Geometrical optics principles are applied to the scattered light to obtain the intensity distribution at the image plane. Multilayered object spaces are also supported by our algorithm. For the first time, numerical FDTD calculations are directly compared to and shown to agree well with broadband experimental microscopy results.     

Palladium(II)?NHC complexes containing benzimidazole ligand as a catalyst for C?N bond formation

The reaction of 2‐(2‐bromoethyl)‐1,3‐dioxane with 1‐alkylbenzimidazole derivatives results in the formation of the new benzimidazolium salts (1). The reaction of Pd(OAc)₂ with 1,3‐dialkylbenzimidazolium salts (1a–c) yields palladium N‐heterocyclic carbene (NHC) complexes (2a–c). All synthesized compounds were characterized by ¹H NMR, ¹³ C NMR, IR and elemental analysis techniques which support the proposed structures. As catalysts, these new palladium complexes offer a simple and efficient methodology for the synthesis of triarylamines and secondary amines from anilines and amines and in a single step with potassium tertiary butoxide as a base. Copyright © 2010 John Wiley & Sons, Ltd.     

Chloro-Bridged Dimeric Cadmium(II)-Isothiocyanate Complex with a Tridentate NNN Type Ligand: Synthesis,X-ray Structure,Thermal Analysis

Abstract  

The dinuclear cadmium(II) complex with 2,6-bis(3,4,5-trimethyl-N-pyrazolyl)pyridine (btmpp) has been synthesized, and characterized by single crystal X-ray diffraction, IR, UV–Vis and TGA–DTA methods. Cd atoms are located in a distorted octahedral environment in the complex. The complex crystalizes in monoclinic space group C 2/c, with unit cell dimensions a = 20.5636(12) Å, b = 14.0167(13) Å, c = 15.6598(11) Å, β = 113.425(5)o, V = 4141.7(5) Å³. There are two intermolecular and a intramolecular hydrogen bonds interactions in crystal.     

Paçäeëeèèe èçotoèob kèeëopoäa pekthÔèkaèèeіі Moëekóëÿphoão kèeëopoäa

Es wurde eine Laboreinrichtung zur kontiniuerlichen Aktivierungsanalyse strömender, Flüssigkeiten entworfen und gebaut. Die Einrichtung bestecht aus dem Vorratsbehälter für die Probelösung, der Aktivierungskammer, einer Pu-Be-Neutronenquelle, der Meβkammer, der Meβeinrichtung, einer Laborpumpe und einem Strömungsmesser. Die vorläufigen Versuche bewiesen, daβ mit der gebauten Einrichtung die Bestimmung von Vanadium, Silber and Kobalt möglich ist.     

A novel approach for strong S-Box generation algorithm design based on chaotic scaled Zhongtang system

Nonlinear Dynamics - Substitution Box (S-Box) is one of the most significant structures used to create an encryption which is strong and resistant against attacks in block encryption algorithms....