Cobalt(II) complexes with disubstituted 3-aminopyrazole derivative: Mononuclear Co(II) complex with in situ prepared formamidine ligand

In the reaction of Co(NO₃)₂ · 6H₂O with 4-acetyl-3-amino-5-methylpyrazole (aamp) two octahedral Co(II) complexes, [Co(aamp)₂(H₂O)₄](NO₃)₂, 1, and [Co(ampf)(MeOH)₂NO₃]NO₃ (ampf = N,N′-bis(4-acetyl-5-methylpyrazole-3-yl)formamidine), 2, were obtained, depending on the reaction conditions. The presence of water in the reaction system leads to incorporation of water molecules into the crystal lattice and 1 was formed. In an anhydrous environment, due to addition of CH(OEt)₃, the fusion of two aamp was induced through their NH₂-groups, incorporating the methine group of CH(OEt)₃. As a result, complex 2, containing an adenino-mimetic NNO pharmacophore ligand, was obtained. The crystal and molecular structure of both compounds was determined. The coordination of aamp in 1 was achieved through N2 of the pyrazole ring. On the contrary, in 2, an unusual coordination mode of pyrazole is found: one of the pyrazole moieties, due to steric hindrance, coordinates through the oxygen atom of the acetyl group instead of N2. The complexes were characterized by elemental analysis and electronic spectra. For 2 a comprehensive IR spectral analysis is given. The metal-ligand interactions in 2 are analyzed by quantum chemical computations. The desolvation mechanism of both compounds is discussed in detail.     

An adaptive trust region method and its convergence

In this paper, a new trust region subproblem is proposed. The trust radius in the new subproblem adjusts itself adaptively. As a result, an adaptive trust region method is constructed based on the new trust region subproblem. The local and global convergence results of the adaptive trust region method are proved. Numerical results indicate that the new method is very efficient.     

Geometric Hermite interpolation by spatial Pythagorean-hodograph cubics

It is shown that, depending upon the orientation of the end tangents t₀,t₁ relative to the end point displacement vector p=p₁–p₀, the problem of G¹ Hermite interpolation by PH cubic segments may admit zero, one, or two distinct solutions. For cases where two interpolants exist, the bending energy may be used to select among them. In cases where no solution exists, we determine the minimal adjustment of one end tangent that permits a spatial PH cubic Hermite interpolant. The problem of assigning tangents to a sequence of points p₀,...,p_n in R³, compatible with a G¹ piecewise-PH-cubic spline interpolating those points, is also briefly addressed. The performance of these methods, in terms of overall smoothness and shape-preservation properties of the resulting curves, is illustrated by a selection of computed examples.     

Spectral Properties and Solubilization Location of 2'-Ethylhexyl 4-(N,N-Dimethylamino)benzoate in Micelles

在阳离子、非离子和阴离子表面活性剂胶束溶液中,研究了4-(N,N-二甲氨基)苯甲酸2'-乙基己基酯(EHDMAB)的双重荧光和紫外吸收．当EHDMAB增溶在不同的胶束溶液中,紫外吸收增强,在离子型胶束溶液中,可观察到具有较长波长的EHDMAB分子内扭转电荷转移(TICT)荧光,相反,在非离子型胶束溶液中,可观察到具有较短波长TICT荧光,特别是位于阳离子胶束Stern层中的吡啶阳离子可强烈猝灭EHDMAB分子的双重荧光,所吸收的紫外辐射主要通过TICT荧光和非辐射去活化衰减．按照EHDMAB分子TICT荧光在有机溶剂中的极性依赖性,EHDMAB分子的4-(N,N-二甲氨基)在离子型胶束和非离子型胶束中处于不同的极性环境;根据EHDMAB和表面活性剂分子的结构和大小分析,EHDMAB分子的4-(N,N-二甲氨基)应朝向胶束的极性头基团,而2'-乙基己基链则朝向疏水性的胶束内核．动态荧光猝灭测量为EHDMAB分子在不同胶束中的位置进一步提供了佐证．     

Studies on adhesion characteristics and corrosion behaviour of vinyltriethoxysilane/epoxy coating protective system on aluminium

The corrosion stability of vinyltriethoxysilane/epoxy coating protective system on aluminium is strongly related to the strength of bonds forming at the metal/organic coating interface. This article is a study of adhesion, composition, electrochemical and transport properties of epoxy coatings electrodeposited on bare aluminium and aluminium pretreated by vinyltriethoxysilane (VTES) during exposure to 3% NaCl. The VTES film was deposited on aluminium surface from 2% vinyltriethoxysilane solution during 30 s. From the values of adhesion strength (pull-off test), time dependence of pore resistance and coating capacitance of epoxy coating (impedance measurements) and diffusion coefficient of water through epoxy coating (gravimetric liquid sorption measurements), the influence of VTES sublayer on the corrosion stability of the electrodeposited epoxy coating was shown.The work discusses the role of the VTES pretreatment in the enhanced adhesion and corrosion stability of epoxy cataphoretic coating. The electrochemical results showed that the aluminium pretreatment by VTES film improved barrier properties of epoxy coating (greater pore resistance and lower coating capacitance). The lower value of diffusion coefficient of water through epoxy coating indicates the lower porosity, while the smaller adhesion reduction points to better adhesion of epoxy coating on aluminium pretreated by VTES film. The composition of the deposited coatings investigated by XPS enabled the clarification of the bonding mechanism.     

Ultrasonic depolymerization of aqueous polyvinyl alcohol.

Ultrasonication has proved to be a highly advantageous method for depolymerizing macromolecules because it reduces their molecular weight simply by splitting the most susceptible chemical bond without causing any changes in the chemical nature of the polymer. Most of the effects involved in controlling molecular weight can be attributed to the large shear gradients and shock waves generated around collapsing cavitation bubbles. In general, for any polymer degradation process to become acceptable to industry, it is necessary to be able to specify the sonication conditions which lead to a particular relative molar mass distribution. This necessitates the identification of the appropriate irradiation power, temperature, concentration and irradiation time. According to the results of this study the reactors constructed worked well in depolymerization and it was possible to degrade aqueous polyvinyl alcohol (PVA) polymer with ultrasound. The most extensive degradation took place at the lowest frequency used in this study, i.e. 23 kHz, when the input power was above the cavitation threshold and at the lowest test concentration of PVA, i.e. 1% (w/w). Thus this study confirms the general assumption that the shear forces generated by the rapid motion of the solvent following cavitational collapse are responsible for the breakage of the chemical bonds within the polymer. The effect of polymer concentration can be interpreted in terms of the increase in viscosity with concentration, causing the molecules to become less mobile in solution and the velocity gradients around the collapsing bubbles to therefore become smaller.     

Preparation of CdO nanoparticles by mechanochemical reaction

CdO nanoparticles of 43 nm in crystal size were successfully synthesized by the mechanochemical reaction (CdCl₂ + Na₂CO₃) with NaCl as a diluent and subsequent thermal treatment at 700°C for 2 h. The samples were characterized by differential thermal analysis (DTA), thermogravimetric analysis (TGA), X-ray diffraction (XRD) and transmission electron microscopy (TEM). Effect of calcination temperature on the crystal size of CdO nanoparticles was primarily investigated. The apparent activation energy of CdO nanoparticle formation during thermal treatment was calculated to be 12.2 kJ/mol.     

污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能研究

亚甲基蓝和环丙沙星是水体中2种污染物, 对生态环境有潜在危害. 本文以市政剩余活性污泥为原料, 氯化锌为活化剂热解制备污泥基吸附剂, 研究盐酸酸洗浓度、氯化锌浓度、热解温度、热解时间等对污泥基吸附剂吸附水中亚甲基蓝和环丙沙星性能的影响. 结果表明 (1)污泥基吸附剂对亚甲基蓝的吸附性能随盐酸酸洗浓度的增大而增加, 对环丙沙星的吸附性能则随盐酸酸洗浓度的增大呈先降后增趋势, 两者均在1.500mol·L-1盐酸浓度下取得最优值. (2)污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能随氯化锌浓度和热解温度的增加呈先升后降趋势, 在氯化锌浓度为4.0mol·L-1、热解温度为500℃时有最优值; 随着热解时间的延长, 污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能分别在500℃热解70min和80min时有最优值. (3)污泥基吸附剂的最佳制备条件为 氯化锌4.0mol·L-1活化2h、500℃热解70min和80min、1.500mol·L-1盐酸酸洗; 以此制得的污泥基吸附剂对亚甲基蓝和环丙沙星的去除率分别为97.7%和96.4%, 平衡吸附量分别为97.9mg·g-1和3.9mg·g-1, 且污泥基吸附剂对亚甲基蓝和环丙沙星的吸附过程均符合准二级动力学方程.     

A rigorous time domain analysis of gyrotrons

A self-consistent time domain analysis of gyrotrons is presented which allows studying multi-mode, multi-frequency operation. The electromagnetic field in the gyrotron cavity is expanded with respect to complete sets of eigenfunctions so that space charge effects are included in the analysis. Two improvements of the modal expansion inside gyrotron cavities are suggested which significantly increase the accuracy and the numerical efficiency of this method, namely, the removal of the non-uniform convergence of some field series at the coupling apertures and the estimation of the asymptotic values of some slowly converging series related to the modal analysis by a moderate number of cavity eigenfunctions. Discrete Fourier transform is used to obtain the time dependence of the electromagnetic field. The electron beam is described by a set of relativistic single particles. It is demonstrated that the strong numerical requirements of the suggested method can be overcome by using a vector computer. Two gyrotrons are investigated, namely, a low Q 35 GHz TE₀₁- and a 150 GHz TE₀₃-gyrotron. Both oscillation build-up and steady state operation are investigated including mode competition and window reflections. The simulations show that the assumption of a monofrequent steady state operation of gyrotrons, which is made by the commonly used frequency domain methods, is not always justified.     

Prolonged bone marrow T1-relaxation in patients with polycythemia vera

In vitro as well as in vivo studies have shown prolonged T1 relaxation times in patients with acute leukemia. The mechanism behind this finding is not known. In order to evaluate if this was specific for leukemia we examined eight patients with polycythemia vera, representing a condition with a rather benign bone marrow neoplasia. In this group of patients we found prolonged T1 relaxation times but normal T2 relaxation times. This may indicate that the prolonged T1 relaxation time seen in leukemic bone marrow is not due to the malignant cell per se.