Thermal properties of flame retardant viscose fibers

This paper discusses the problem of the thermal properties of flame retarding additives based on phosphazene derivatives and of the commercial agents TomflamB, FlammexT23P and StockhausenW-20949, as well as of flame resistant viscose fibers containing the above agents. Results of this investigation showed the action of FlammexT23P, StockhausenW-20949 and phosphazene derivatives at lower temperature. TomflamB acted within a much wider range of temperatures. The flame retardant additives applied to viscose fibers change the thermal properties of the fiber material.     

Determination of retained austenite in bearing steel

M?ssbauer effect experiments in scattering geometry were performed for gauging plates and bearings in order to measure the retained austenite content. The results, obtained from numerical calculations of Mössbauer spectra are compared with the X-ray diffraction measurements. A simple three point Mössbauer effect technique is applied in order to decrease the time of measurements in the industrial use.     

Solid-state structure of polypeptide-based rod-coil block copolymers: Folding of helices

This work compares the solid-state structures of films made from a polystyrene-poly(Z-L-lysine) (1) and a polystyrene-poly(-benzyl-L-glutamate) (2) block copolymer, both having virtually the same numbers of repeating units and block length ratios. Small-angle X-ray scattering (SAXS) revealed a hexagonal-in-undulated lamellar morphology for both films. The long-period and the thickness of layers obtained for 2 were by a factor of three smaller as compared to 1, indicating that PBLGlu helices were folded twice, whereas PZLLys helices were fully stretched. Another difference shows up in the packing of helices, the level of ordering being considerably lower in 2. This might be due to spatial restrictions in the proper alignment of back-folded helical segments.     

High energy,large momentum transfer amplitudes: The sum of ladder diagrams inΦ 3 theory

We perform summation of ladder diagrams in the high energy, large momentum limit. This leads to new results for both perturbative and non-perturbative approaches. In particular, an explicit expression for any diagram's contribution is given, the non-perturbative form of asymptotically non-analytic terms is found and representation of amplitude as a series of Regge poles is presented.Supported in part by Polish Ministery of National Education, grant no. CPBP 01.03     

Ergodic Properties of the Quantum Geodesic Flow on Tori

We study ergodic averages for a class of pseudodifferential operators on the flatN-dimensional torus with respect to the Schrödinger evolution. The later can be consider a quantization of the geodesic flow on . We prove that, up to semi-classically negligible corrections, such ergodic averages are translationally invariant operators.Mathematics Subject Classifications (2000) 58J50, 58J40, 81S10.     

Designing strategy to enhance mode selectivity of higher-output oxide-confined vertical-cavity surface-emitting lasers

Performance of modern oxide-confined (OC) vertical-cavity surface-emitting diode lasers (VCSEL s) is more sensitive to the construction details than in the case of other VCSEL s. In particular, a stable single-fundamental-mode operation is difficult to be achieved in these VCSEL s especially in higher-output large-size continuous-wave (cw) operating devices at higher temperatures. In the present paper, an operation of OC VCSEL s has been investigated with the aid of the comprehensive fully self-consistent model using the (GaIn)(NAs)/GaAs quantum-well VCSEL with two oxide apertures as a typical example. A new approach is proposed to enhance cw RT single-fundamental-mode low-threshold operation in higher-output OC VCSEL s. One of their oxide apertures should be shifted to the node position of the resonator standing wave where it is working as the electrical aperture only. Then diameters of both apertures may be changed independently giving an additional degree of freedom for VCSEL designing, which enables their optimisation. While the larger-diameter optical aperture placed in the anti-node position creates an efficient radial waveguiding effect, the smaller-diameter electrical aperture enhances a more uniform current injection into the VCSEL active region. Due to combining influence of both the apertures, the single-fundamental-mode operation is predicted in a large device with the 10-m-diameter active region even for 80 K active-region temperature increase over RT of the ambient. An impact of intentional detuning at room-temperature (RT) of VCSEL active-region gain spectrum towards shorter wavelengths with respect to the resonator mode improves mode selectivity is also analysed. PACS  42.55.Px; 02.60.Cb; 85.60.Bt     

3D MR imaging of dental cavities-an in vitro study

A 3D spin-echo (3D SE) pulse sequence was used on a 4.7 T research MRI system to produce images of extracted human first molar tooth placed in CuSO4 water solution. The maximal resolution achieved was 35 x 63 x 300 microm3 in read and two phase directions, respectively. The high-intensity signal from water in solution together with the lack of signal from mineralized tooth tissue produce very good contrast allowing to visualize topography of outer and inner surfaces of the tooth. The 3D MR data were median filtered, binarized and then divided into separate segments corresponding to the inner tooth cavities and the hard tooth tissue. The topography of the root canals was visualized and the canals volume was calculated. The presented technique may be used for quantitative analysis of the root canal cavities shape and volume. The results of such an analysis may be applied for estimation of the quality of the impressional mapping methods in restorative dentistry or as an alternative non-impressional 3D mapping method.     

Novel Method for HPLC Analysis of Triterpenic Acids Using 9-Anthryldiazomethane Derivatization and Fluorescence Detection

Triterpenic acids are a group of secondary plant metabolites which are part of the cuticular waxes covering fruits, leaves, and flowers. To date, quantitative analysis of these compounds has often been conducted using high-performance liquid chromatography coupled with spectrophotometric detection or mass spectrometry; however, these methods have some major drawbacks. This paper reports a new method of analysis implementing derivatization with 9-anthryldiazomethane and fluorescence detection. The method consists of the extraction of analytes from a matrix, purification with anion exchanging SPE columns, and an optional step of the alkaline hydrolysis of triterpenic acid esters. The paper also describes a fast and easy method for the synthesis of the derivatization agent. The detection limits of the method presented are approximately 100-fold lower than in a similar method using ultraviolet spectrophotometry as the mode of detection. The recovery and repeatability of the method are at satisfactory levels.