Three-Component Reaction of Triphenylphosphine,Acetylenic Esters,and Arylsulfonyl Hydrazides or Aryl Hydrazines: An Efficient One-Pot Synthesis of Stable β-Nitrogen-Substituted Phosphorus Ylides

The three-component reaction between dialkyl acetylenedicarboxylates and triphenylphosphine in the presence of arylsulfonyl hydrazides or aryl hydrazines produces highly functionalized, salt-free phosphorus ylides in excellent yields.     

On the fractional-order extended Kalman filter and its application to chaotic cryptography in noisy environment

In this paper via a novel method of discretized continuous-time Kalman filter, the problem of synchronization and cryptography in fractional-order systems has been investigated in presence of noisy environment for process and output signals. The fractional-order Kalman filter equation, applicable for linear systems, and its extension called the extended Kalman filter, which can be used for nonlinear systems, are derived. The result is utilized for chaos synchronization with the aim of cryptography while the transmitter system is fractional-order, and both the transmitter and transmission channel are noisy. The fractional-order stochastic chaotic Chen system is then presented to apply the proposed method for chaotic signal cryptography. The results show the effectiveness of the proposed method.     

Influences of Different Enzymatic Treatment on Denim Garment

In current study, the effects of different enzymatic treatment including acid cellulases, neutral cellulases, and combination of laccases with cellulases on denim garment were investigated. The color changes of different samples were compared by colorimetric indices for the garment surface and back and also white pocket. Abrasion resistance, tensile strength, and crease recovery angle of the samples were measured within the standard methods. Also, surfaces of the treated samples were observed by SEM. The results showed that the combination of laccases with cellulases help to improve the lightness and decrease staining on both back of garment and on white pocket.     

On the fuzzy minimum entropy control to stabilize the unstable fixed points of chaotic maps

This paper presents a fuzzy algorithm for controlling chaos in nonlinear systems via minimum entropy approach. The proposed fuzzy logic algorithm is used to minimize the Shannon entropy of a chaotic dynamics. The fuzzy laws are determined in such a way that the entropy function descends until the chaotic trajectory of the system is replaced by a regular one. The Logistic and the Henon maps as two discrete chaotic systems, and the Duffing equation as a continuous one are used to validate the proposed scheme and show the effectiveness of the control method in chaotic dynamical systems.     

Green synthesis of isatin-based compounds

Research on Chemical Intermediates - Isatin and related derivatives are synthetically versatile substrates. These compounds can form a wide range of heterocyclic structures. These characteristics...     

Preparation of uniform TiO2 nanostructure film on 316L stainless steel by sol-gel dip coating

Sol was prepared by the mixing of tetra-η-butyle titanat, ethyl aceto acetate, and ethanol in an optimized condition. Polished 316L specimens were coated with the sol by dip-coating method. The influences of drying condition, withdrawal speed, calcination temperature, addition of dispersant, and pH of sol on TiO₂ nanostructure coating were investigated. Choosing of alcohol as drying atmosphere hindered the crack formation. The relation between coating thickness and withdrawal speed was evaluated. The optimum temperature to create a uniform distribution of nanoparticles of anatase was derived as 400 °C. Average roughness of coating was found about 10.61 nm by AFM analysis. Dispersant addition promoted formation of a uniform film as well as prevention of agglomeration. Acidic sol provided smaller particles than neutral sol.     

Density and viscosity of 1-butyl-3-methylimidazolium nitrate with ethanol, 1-propanol, or 1-butanol at several temperatures

Densities and viscosities of 1-butyl-3-methylimidazolium nitrate [Bmim][NO₃], and its binaries with alcohol (ethanol, 1-propanol, or 1-butanol) were measured at different temperatures. The densities and viscosities of pure ionic liquid were correlated successfully by empirical equations. The Vogel–Fulcher–Tammann equations can fit the experimental data of viscosities for pure IL. Excess molar volume and viscosity deviations were calculated for the binaries. The excess molar volumes have negative deviations from the ideal solution.     

Influence of synthesis and operating parameters on silicalite-1 membrane properties

The present study deals with the synthesis of nanostructured silicalite-1 membranes on porous α-Al₂O₃ supports by a hydrothermal method. Different parameters including the synthesis conditions (temperature and alkalinity) and operating conditions (temperature and pressure) were investigated. The membranes were characterized by X-ray diffraction and scanning electron microscopy techniques. The optimum synthesis temperature and alkalinity were determined to be 160 °C and pH = 11, respectively. The permeability of CO₂ and CH₄ through the optimized membrane was determined by the pressure drop method. The results revealed that the main effective separation mechanism was adsorption. The permeation of CO₂ and CH₄ declined with increasing temperature, whereas high feed pressures enhanced the single gas flux. The CO₂ and CH₄ permeability values at 30 °C and 2 bar were 1.62 × 10^?7 and 2.07 × 10^?7 mol m^?2 s^?1 Pa^?1, respectively. Furthermore, the response surface methodology analysis confirmed the significance of all the variables and the proposed model. Excellent correlation between the experimental and predicted data (R² = 0.99) was obtained, confirming that response surface methodology is a powerful tool for modeling nanostructured silicalite-1 membrane processes.     

Magnetically recoverable AlFe/Te nanocomposite as a new catalyst for the facile esterification reaction under neat conditions

In this work, a new Fe₃O₄/AlFe/Te nanocomposite was synthesized by a one‐step sol–gel method. The Fe₃O₄ magnetic nanoparticles (MNPs) were prepared and then mixed with aluminum telluride (Al₂Te₃) in an alkali medium to produce the desired catalyst. After characterization of the Fe₃O₄/AlFe/Te nanocomposite by SEM, TEM, EDS, XRD, and ICP analyses, it was used in the esterification reaction. This heterogeneous catalyst showed high catalytic activity in the esterification of commercially available carboxylic acids with various alcohols to produce the desired esters at high conversions under neat conditions. The Fe₃O₄/AlFe/Te nanocomposites were separated from the reaction mixture via an external magnet and re‐used 8 times without significant loss of catalytic activity.