Preparation and Characterization of Activated Carbon from Microwave and Conventional Heated Almond Shells Using Phosphoric Acid Activation

Activated carbon production from almond shells using phosphoric acid activation agent was achieved by applying both conventional heating and microwave heating in succession. The morphology and surface properties of activated carbon were studied using thermogravimetric and differential gravimetric analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy, and Brunauer–Emmett–Teller analysis. A surface area of 1128 m²/g was achieved by optimizing the microwave power (500?W), microwave application time (15?minutes), conventional heating time (45?minutes), conventional heating temperature (500?°C), and the phosphoric acid:sample ratio (0.7:1). An adsorption capacity of methylene blue of 148?mg/g and an iodine value of 791?mg/g was obtained for the prepared activated carbon.     

Effect of biotransformation on multispecies plume evolution and natural attenuation

Biological transformation of volatile organic compounds is one of the key factors that influence contaminant-plume evolution and thus natural attenuation. In this study we investigate the effect of biological transformation on the transport of contaminants in the aqueous and gaseous phases. The analysis includes the study of the effect of density-driven advection of contaminants in the gaseous phase on multiphase and multispecies flow, fate and transport modeling in the subsurface. Trichloroethylene (TCE) and its two byproducts, dichloroethylene and vinyl chloride, are analyzed as the target contaminants. Our results indicate that density-driven advection of the gaseous phase, which is initiated by evaporation of TCE as a nonaqueous phase liquid, increases the downward and also the lateral migration of TCE within the unsaturated zone. This process also influences the location of high-concentration zones of the byproducts of TCE in the unsaturated and the saturated zones. Biotransformation of TCE contributes to the reduction of dissolved TCE plume development as expected. The daughter byproducts, which are introduced into the subsurface system, show distinct transport patterns as they are affected by their independent degradation kinetics and density-driven advection. These observations, which are based on our simulation results for biotransformation and transport of TCE and its byproducts, are useful in evaluating the natural attenuation processes, its potential health hazards and also the evaluation of potential plume development at contaminated sites.     

Excess isentropic compressibility and speed of sound of the ternary mixture 2-propanol + diethyl ether + n-hexane and the constituent binary mixtures at 298.15 K

Speed of sound and densities of the ternary mixture 2-propanol + diethyl ether + n-hexane and also the binary mixtures 2-propanol + diethyl ether and 2-propanol + n-hexane have been measured at the entire composition range at 298.15 K. The excess isentropic compressibilities and the excess speed of the sound have been calculated from experimental densities and speed of sound. These excess properties of the binary mixtures were fitted to Redlich-Kister equation, while the Cibulka’s equation was used to fit the values related to the values to the ternary system. These excess properties have been used to discuss the presence of significant interactions between the component molecules in the binary mixtures and also the ternary mixtures. Speed of sound of the binary mixtures and the ternary mixture have been compared with calculated values from free length theory (FLT), collision factor theory (CFT), Nomoto’s relation (NR), Van Deal’s ideal mixing relation (IMR) and Junjie’s relation (JR). The results are used to compare the relative merits of these theories and relations in terms of the root mean square deviation relative (RMSD_r).     

Übergangsmetall—methylen-komplexe: LXI. Übergangsmetall—vinyliden-komplexe: Neuartige synthese aus diazoalken-vorstufen

The diazoolefines of composition N₂CCR₂ (R/R = CH₃/CH₃ and(-CH₂-)₅) are suitable precursors of the corresponding vinylidene ligands CCR₂. Thus, treatment of the RhRh complex [(η⁵-C₅Me₅)Rh(μ-CO)]₂ (1) with the N-nitrosourethanes 2a and 2b, resp., in the presence of lithium t-butoxide yields the otherwise inaccessible μ-vinylidene complexes (μ-CCR₂)[(η⁵-C₅Me₅)Rh(CO)]₂ (R = CH₃ (3a), R,R = (-CH₂-)₅ (3b)). The analogous cobalt compound (μ-CCMe₂)[(η⁵-C₅Me₅)Co(CO)]₂ (5a) is obtained similarly. This procedure extends the well-documented diazoalkane method for the synthesis of μ-alkylidene complexes to the less stable diazoalkenes. A single-crystal X-ray diffraction study of the dimethylvinylidene derivative 3a shows the CMe₂ ligand to adopt an almost symmetrically metal-bridging position (d(RhC) 197.8(1) and 204.3(1) pm), with a rhodium-rhodium single bond completing a three-membered Rh₂C-metallacycle (d(RhRh) 268.4(0) pm) analogous with cyclopropane.     

Determination of bismuth, indium and lead in geological samples by electrothermal AAS Part 2. Comparative study of palladium and molybdenum containing chemical modifiers*

A comparative and systematic study has been carried out of the effects of palladium and molybdenum containing chemical modifiers, such as Pd + Rh, Pd + Pt, Pd + Ru, Pd + Rh + Pt, Pd + Rh + Ru, Mo + Pd, Mo + Rh, Mo + Ru and Mo + Pt and additionally tartaric acid (TA) as a reducing agent together with mixed modifiers for the thermal stabilization of Bi, In and Pb in a Zeeman electrothermal atomic absorption spectrometer (ETAAS). The effect of the mass ratios of the mixed modifier components on the maximum pretreatment temperature for the analytes has been determined. The modifier mixtures of Pd + Rh + Pt, Mo + Pd + TA and Mo + Pt + TA were found to be especially powerful for the determination of Bi, In and Pb. These mixed modifiers could increase the ashing temperatures of the analytes up to 1250–1400° C. They were applied to the determination of Bi and Pb in dissolved geological reference samples and accuracy and precision of the method were thereby enhanced. The percent relative error was decreased from 20.0 to 0.4 for Bi and from 10.5 to 0.3 for Pb, depending on the sample type. Received: 9 May 1997 / Revised: 19 August 1997 / Accepted: 20 August 1997     

Synthesis,Crystal Structure,and Electrochemical Behaviour of an Azido μ‐bridged Ni2+ Complex

A homo‐dinuclear Ni^II complex was prepared from 2, 6‐bis(3, 5‐dimethylpyrazolyl)pyridine (Me₄‐bpp) and azide ions in nonaqueous media. It was characterized by single crystal X‐ray structural analysis, IR spectroscopy, and elemental analysis. In addition, the electrochemical properties of the compound were determined with cyclic voltammetry in DMF. The title compound crystallizes in the P2₁/n monoclinic space group, with unit cell parameters a = 8.978(1), b = 12.459(1), c = 17.764(1) Å, ß =100.603(3)°, V = 1953.0(3) ų, Z = 2. The Ni²⁺ ion has a distorted octahedral environment involving three nitrogen atoms of the Me₄‐bpp ligand, two nitrogen atoms from the bridged azide group, and one nitrogen atom from the terminal azide group. The Ni···Ni distance is 3.273(5) Å.     

trans‐Diaquabis(3‐hydroxybenzoato‐κO1)bis(nicotinamide‐κN1)copper(II)

The title compound, [Cu(C₇H₅O₃)₂(C₆H₆N₂O)₂(H₂O)₂], is a two‐dimensional hydrogen‐bonded supramolecular complex. The Cu^II ion resides on a centre of symmetry and is in an octahedral coordination environment comprising two pyridine N atoms, two carboxylate O atoms and two O atoms from water molecules. Intermolecular N—H...O and O—H...O hydrogen bonds produce R₂²(4), R₂²(8) and R₂²(15) rings which lead to one‐dimensional polymeric chains. An extensive two‐dimensional network of N—H...O and O—H...O hydrogen bonds and C—H...π interactions are responsible for crystal stabilization.     

Three (E)‐2‐[(bromo­phen­yl)imino­meth­yl]‐4‐methoxy­phenols

The title compounds, (E)‐2‐[(2‐bromo­phenyl)imino­methyl]‐4‐methoxy­phenol, C₁₄H₁₂BrNO₂, (I), (E)‐2‐[(3‐bromo­phenyl)­imino­methyl]‐4‐methoxy­phenol, C₁₄H₁₂BrNO₂, (II), and (E)‐2‐[(4‐bromo­phenyl)imino­methyl]‐4‐methoxy­phenol, C₁₄H₁₂BrNO₂, (III), adopt the phenol–imine tautomeric form. In all three structures, there are strong intra­molecular O—H⋯N hydrogen bonds. Compound (I) has strong inter­molecular hydrogen bonds, while compound (III) has weak inter­molecular hydrogen bonds. In addition to these inter­molecular inter­actions, C—H⋯π inter­actions in (I) and (III), and π–π inter­actions in (I), play roles in the crystal packing. The dihedral angles between the aromatic rings are 15.34 (12), 6.1 (3) and 39.2 (14)° for (I), (II) and (III), respectively.     

The first bis(orotato–N,O) complex: Synthesis,crystal structure,spectroscopic and thermal characterization of (chaH)2[Cu(HOr–N,O)2(cha)] · 2H2O (cha = cyclohexylamine and HOr = orotate(2−))

The novel bis(cyclohexylaminium) cyclohexylaminebis(orotate–N,O)cuprate(II) dihydrate, (C₆H₁₅N)₂[Cu(C₅H₂N₂O₄)₂(C₆H₁₄N)] · 2H₂O, has been prepared and characterized by elemental analysis, magnetic measurements, FT-IR and UV–Vis spectroscopy, thermal analysis and X-ray diffraction. The Cu(II) complex crystallizes in the monoclinic space group P2₁/c. The copper atom in the five-coordinated (chaH)₂[Cu(HOr–N,O)₂(cha)] · 2H₂O is chelated by a deprotonated pyrimidine nitrogen atom and carboxylate oxygen atom as a bis(bidentate) ligand and the cyclohexylamine ligand completes the square-pyramidal coordination. The thermal decomposition of the complex has been predicted by the help of thermal analysis (TG, DTG and DTA).