Conformational changes of the amyloid beta-peptide (1-40) adsorbed on solid surfaces

The conformational change of the 39-43 residues of the amyloid beta-peptide (Abeta) toward a beta-sheet enriched state promotes self-aggregation of the peptide molecules and constitutes the major peptide component of the amyloid plaques in Alzheimer patients. The crucial question behind the self-aggregation of Abeta is related to the different pathways the peptide may take after cleavage from the amyloid precursor proteins at cellular membranes. This work is aiming at determining the conformation of the Abeta (1-40) adsorbed on hydrophobic Teflon and hydrophilic silica particles, as model sorbent surfaces mimicking the apolar transmembrane environment and the polar, charged membrane surface, respectively. The mechanism by which the Abeta interacts with solid surfaces strongly depends on the hydrophobic/hydrophilic character of the particles. Hydrophobic and electrostatic interactions contribute differently in each case, causing a completely different conformational change of the adsorbed molecules on the two surfaces. When hydrophobic interactions between the peptide and the sorbent prevail, the adsorbed Abeta (1-40) mainly adopts an alpha-helix conformation due to H-bonding in the apolar part of the peptide that is oriented towards the surface. On the other hand, when the peptide adsorbs by electrostatic interactions beta-sheet formation is promoted due to intermolecular association between the apolar parts of the adsorbed peptide. Irrespective of the characteristics of the solid sorbent, crowding the surface results in intermolecular association between adsorbed molecules leading to a strong aggregation tendency of the Abeta (1-40). [Diagram: see text] CD spectra of Abeta (1-40) at pH 7: A) in solution ([Abeta]=0.2 mg.ml(-1)) freshly prepared (line) and after overnight incubation (symbols);B) on Teflon (Gamma=0.5 mg.m(-2)).     

A comparison of the adsorption of saliva proteins and some typical proteins onto the surface of hydroxyapatite

Adsorption of protein from saliva on hydroxyapatite was compared with adsorption of several typical proteins with different electric charges, i.e. lysozyme, human serum albumin, β-lactoglobulin and ovalbumin. Adsorbed amounts of these proteins were determined and electrophoretic mobilities of protein-covered hydroxyapatite particles were measured, at different values for the adsorbed mass and, therefore, at various degrees of surface coverage. Also, adsorption kinetics were investigated by streaming potential measurements of a hydroxyapatite surface in contact with a protein solution, allowing monitoring of changes in the zeta-potential of the protein-covered hydroxyapatite surface in real time. The adsorbed amounts show that, as compared to most of the other proteins, the saliva proteins have remarkably low adsorption affinity. The measured values for the electrophoretic mobilities indicate that the positively charged proteins in the saliva mixture preferentially adsorb onto the negatively charged hydroxyapatite surface; this is most pronounced at low protein concentration in solution (i.e. at low coverage of the surface by the protein). Preferential uptake of the positively charged saliva proteins during the initial stages of the adsorption process is also concluded from the results of the kinetics experiments. Preferential adsorption of positive proteins is somewhat suppressed by the presence of Ca²⁺ ions in the medium. The results suggest that an acquired pellicle on a tooth in an oral environment contains a significant fraction of positively charged proteins. The positively charged proteins in the pellicle reduce the zeta-potential at the tooth surface to low values; consequently, electrostatic forces are expected to play only a minor role in the interaction with other components (e.g. bacterial cells).     

Driving forces for protein adsorption at solid surfaces

Under most conditions proteins show a strong tendency to adsorb at interfaces. The general principles underlying the interaction between proteins and solid surfaces in an aqueous environment are discussed. These principles are illustrated by experimental results obtained with well-defined systems. The approach is mainly based on thermodynamic arguments.     

Adsorption of Immunoglobulin G on Core-Shell Latex Particles Precoated with Chaps

The aim of this work is to investigate the adsorption behavior of a monoclonal antibody (immunoglobulin G, IgG) on latex particles, possessing reactive chloromethyl groups, precoated with 3-([3-cholamidopropyl]dimethylammonio-1-propanesulfonate (Chaps). The amount and reactivity of the surface chloromethyl groups were monitored by the nucleophilic attack of glycinate to the functional groups as a function of time at 22 and 36 degrees C. The extent of displacement of Chaps by IgG and the enthalpy of the process were determined under two different conditions of precoating the latex particles with Chaps, at 22 and 36 degrees C. The adsorption of IgG takes place in two steps; the first one involves physical interaction between IgG and the surface. This step is relatively fast (in the range of minutes) and independent of temperature. In the second step covalent bonding between the protein and the active surface groups occurs. This reaction is improved by raising the temperature because Chaps desorption, which exposes the reactive chloromethyl groups on the latex particles, is kinetically and thermodynamically favored at 36 degrees C and the covalent bonding of IgG is faster at 36 degrees C. Copyright 2000 Academic Press.     

Microbial adhesion to poly(ethylene oxide) brushes: influence of polymer chain length and temperature

Glass surfaces were modified by end-grafting poly(ethylene oxide) (PEO) chains having molecular weights of 526, 2000, or 9800 Da. Characterization using water contact angles, ellipsometry, and X-ray photoelectron spectroscopy confirmed the presence of the PEO brushes on the surface with estimated lengths in water of 2.8-, 7.5-, and 23.7-nm, respectively. Adhesion of two bacterial (Staphylococcus epidermidis and Pseudomonas aeruginosa) and two yeast (Candida albicans and Candida tropicalis) strains to these brushes was studied and compared to their adhesion to bare glass. For the bacterium P. aeruginosa and the yeast C. tropicalis, adhesion to the 2.8-nm brush was comparable to their adhesion on bare glass, whereas adhesion to the 7.5- and 23.7-nm brushes was greatly reduced. For S. epidermidis, adhesion was only slightly higher to the 2.8-nm brush than that to the longer brushes. Adhesion of the yeast C. albicans to the PEO brushes was lower than that to glass, but no differences in adhesion were found between the three brush lengths. After passage of an air bubble, nearly all microorganisms adhering to a brush were removed, irrespective of brush length, whereas retention of the adhering organisms on glass was much higher. No significant differences were found in adhesion nor retention between experiments conducted at 20 and those conducted at 37 degrees C.     

A potential approach for ordinal games

We introduce the class of ordinal games with a potential, which are characterized by the absence of weak improvement cycles, the same condition used by Voorneveld and Norde (1997) for ordinal potential games.     

My voyage of discovery to proteins in flatland ...and beyond

The 9th-10th type III fibronectin domain pair (9-10FNIII) has found widespread use as a biomimetic surface for cell adhesion. However, the effect of mutations to 9-10FNIII on its surface adsorption characteristics have not been investigated. Here we address this issue using total internal reflection fluorescence (TIRF) and circular dichroism spectroscopy, comparing two conformationally stable 9-10FNIII mutants against the wild type. Desorption of the 9-10FNIII mutants from the silica surface was minimal in comparison to desorption of 9-10FNIII. The extent and rate of protein desorption from silica was empirically matched by loss of secondary structure upon adsorption, with only the spectrum for 9-10FNIII showing extensive loss of the beta-sandwich fold. For the proteins adsorbed to hydrophobic surfaces, only the CD spectra for the 9-10FNIII mutant constrained via an interdomain disulphide bridge showed similarity with the corresponding solution structure. Since the binding of 9-10FNIII to integrin alpha5beta1 is highly dependent on the relative spatial arrangement of the two domains, we suggest that the observed differences in cell adhesion and spreading on wild type 9-10FNIII and mutants may in part be attributed to the extent of protein desorption and unfolding at the surface.     

Electrospray ionization quadrupole time-of-flight tandem mass spectrometric analysis of hexamethylenediamine-modified maltodextrin and dextran

A combined methodology for obtaining at the preparative scale and characterization by nanoelectrospray ionization (nanoESI) quadrupole time-of-flight (QTOF) mass spectrometry (MS) and tandem MS (MS/MS) of linear polysaccharides modified at the reducing end is presented. Two polydisperse maltodextrins (1000 and 3000 Da) and a high molecular weight polydisperse dextran (6000 Da) were coupled with hexamethylenediamine (HMD). The coupling products were analyzed by nanoESI-QTOF-MS in the positive ion mode and MS/MS using collision-induced dissociation (CID) at low energies. In the HMD-M1000 mixture, the polysaccharide chains containing from 2 to 8 Glc residues were detected, while in HMD-M3000 we identified a complete series of chains containing from 8 to 21 Glc moieties. The employed ESI conditions enhanced the detection of chains with up to 46 Glc residues in the HMD-D6000 sample. By optimized MS/MS, HMD-modified polysaccharides of 3, 4, 5, 12 and 46 degrees of polymerization yielded product ion spectra exhibiting the whole set of Y- and B-fragment ions. The MS structural data were obtained within a few minutes of signal acquisition, with a sample consumption situating the analysis sensitivity in the picomolar range.