Consecutive reactions of diethoxydimethylsilane and triethoxymethylsilane with methoxide ions in methanol solution

The consecutive reactions of (CH₃)₂Si(OC₂H₅)₂ and CH₃Si(OC₂H₅)₃ with methoxide ions were investigated in methanol solutions. The reverse transesterification reactions with ethoxide ions could be neglected in both cases since the concentration of ethoxide in methanol solution was assumed to be low due to the fast equilibrium reaction C₂H₅O^? + CH₃OH ? C₂H₅OH + CH₃O^?. The progress of the reactions was followed by monitoring the formation of ethanol with a Fourier-transform infrared spectrometer. All rate constants were determined at 295 K. The reactions between the dialkoxydimethylsilanes and methoxide ions were assumed to consist of two consecutive steps that can be represented by the net reaction; (CH₃)₂Si(OC₂H₅)₂ + 2CH₃O^? → (CH₃)₂Si(OCH₃)₂ + 2C₂H₅O^?. The two consecutive rate constants were established as 1.93 ± 0.12M^?1s^?1 and 1.00 ± 0.12M^?1s^?1, respectively. The consecutive rate constants for the reactions between the trialkoxymethylsilanes and methoxide ions can be written according to the total reaction; CH₃Si(OC₂H₅)₃ + 3CH₃O^? → CH₃Si(OCH₃)₃ + 3C₂H₅O^?. The three rate constants corresponding to each consecutive step were established as 1.12 ± 0.09 M^?1s^?1, 0.82 ± 0.10 M^?1s^?1, and 0.51 ± 0.06 M^?1s^?1, respectively. © 1995 John Wiley & Sons, Inc.     

Hydrothermal synthesis of fluorated single crystals: BaMnF4 and BaF2·HF

Investigations to eliminate defects in the incommensurate phase BaMnF₄, led to a method of preparation at a temperature lower than the melting point of BaMnF₄. Qualitative studies of the systems BaF₂ -H₂O -HF and MnF₂ -H₂O -HF showed that very pure single crystals of BaMnF₄ could be grown at a temperature lower than 300°C. Several new phases could be isolated as single crystals, in particular: BaF_2^′HFSingle crystal X-ray analysis revealed the compound to be monoclinic (Space Group P2₁ and Z = 2) and confirmed the formula found by chemical analysis. However, because of the difficulty to distinguish between fluorine and oxygen atoms, some problems remain, which will be solved by neutron diffraction studies. Infrared analysis indicate the presence of HF^?₂ and suggest the following representation: (Ba²⁺)₂(HF^?₂)₂(F^?)₂.It is possible to extend this method of synthesis to the preparation of other fluorides and related compounds, in particular to those of europium and strontium.     

A family of alkynylgold(III) complexes [AuI(mu-{CH2}2PPh2)2Au(III)(C triple bond CR)2] (R = Ph, tBu, Me3Si): facile and reversible comproportionation of gold(I)/gold(III) to digold(II)

The symmetric digold(II)dichloride bis(ylide) complex [Au2Cl2(mu-{CH2}2PPh2)2] reacts with acetylides to form the asymmetric heterovalent gold(I)/gold(III) complexes [AuI(mu-{CH2}2PPh2)2AuIII(CCR)2] [R = Ph, tBu, and SiMe3], the phenyl analogue of which was characterized by X-ray crystallography. These compounds represent the first examples of gold(III) complexes containing two acetylide ligands. [AuI(mu-{CH2}2PPh2)2AuIII(CCPh)2] undergoes a reversible comproportionation reaction upon treatment with [Ag(ClO4)tht] to give the symmetric digold(II) cationic complex [Au2(tht)2(mu-{CH2}2PPh2)2](ClO4)2. If this complex is treated with phenylacetylene in the presence of base, the heterovalent gold(I)/gold(III) complex is re-formed. This reversible interconversion between binuclear gold(I)/gold(III) and digold(II) bis(ylide) complexes is unprecedented.     

Zur Struktur von N-Benzoylthiobenzamid

Structure of N-Benzoylthiobenzamide N-Benzoylthiobenzamide forms two polymorphic modifications of which the crystal and molecular structures have been determined by X-ray structure analysis. In both modifications the molecules exist as NH tautomeres, but there are differences with regard to their rotameric configurations. In the monoclinic modification both symmetry independent molecules have a Z,Z′ configuration. The triclinic modification also contains two symmetry independent molecules, but now a Z,Z′ and an E,Z′ configuration exist. All four molecules deviate appreciably from planarity. The results of both structure determinations are compared with each other and with the structure of monothiodibenzoylmethane.     

FLUORESCENCE PROPERTIES OF PORPHYRIN-GLOBIN FROM HUMAN HEMOGLOBIN

Fluorescence excitation and emission spectra, decays, and quantum yields are reported for the porphyrin-globin of hemoglobin (Hb^desFe) in aqueous solution of pH 8, at 4°C. A very weak fluorescence was observed in the UV (maximum at 334 nm), due to tryptophan and tyrosine residues, in addition to the strong porphyrin emission in the visible (maxima at 624 and 692 nm) reported previously. The absorption and fluorescence properties of the porphyrins of Hb^desFe were compared to those for free porphyrin in organic solvents and in aqueous solution. The close similarity of the fluorescence decays and quantum yields in Hb^desFe and in solution indicate the absence of stronger, specific porphyrin-protein interactions; however, slight spectral shifts point to the existence of water molecules in the Hb^desFe porphyrin environment. The fluorescence study also demonstrates the existence of efficient Trp-porphyrin energy transfer of Förster type. The extent of transfer is in satisfactory agreement with the value expected from crystallographic data for hemoglobin. The results are discussed and compared to previous fluorescence studies of hemoglobin and apohemoglobin. An improved method for the preparation of Hb^desFe is reported.     

The Counterion Effect on the Assembly of Coordination Networks of Cationic (η3‐Allyl)palladium Complexes Containing 3,5‐Dimethyl‐4‐nitro‐1H‐pyrazole

Two new (η³‐allyl)palladium complexes containing the ligand 3,5‐dimethyl‐4‐nitro‐1H‐pyrazole (Hdmnpz) were synthesized and characterized as [Pd(η³‐C₃H₅)(Hdmnpz)₂]BF₄ ( 1 ) and [Pd(η³‐C₃H₅)(Hdmnpz)₂]NO₃ ( 2 ). The structures of these compounds were determined by single‐crystal X‐ray diffraction to evaluate the intermolecular assembly. Each complex exhibits similar coordination behavior consistent with cationic entities comprised of two pyrazole ligands coordinated with the [Pd(η³‐C₃H₅)]⁺ fragment in an almost square‐planar coordination geometry. In 1 , the cationic entities are propagated through strong intermolecular H‐bonds formed between the pyrazole NH groups and BF ions in one‐dimensional polymer chains along the a axis. These chains are extended into two‐dimensional sheet networks via bifurcated H‐bonds. New intermolecular interactions established between NO₂ and Me substituents at the pyrazole ligand of neighboring sheets give rise to a three‐dimensional network. By contrast, compound 2 presents molecular cyclic dimers formed through N? H???O H‐bonds between two NO counterions and the pyrazole NH groups of two cationic entities. The dimers are also connected to each other through C? H???O H‐bonds between the remaining O‐atom of each NO ion and the allyl CH₂ H‐atom. Those interactions expand in a layer which lies parallel to the face (101).     

Evaluation of As,Se and Zn in octopus samples in different points of sales of the distribution chain in Brazil

Three CRMs of different matrix composition were analysed, representing an environmental matrix sample (BCR–320R Channel Sediment), a botanical matrix sample (SRM 1547 Peach Leaves) and a zoological matrix sample (SRM 1566b Oyster Tissue). The element mass fractions were obtained using the KayWin program. Analytical measurement uncertainty was determined by two approaches: (1) the routine procedure applying combination of the overall uncertainty u(m) = 3.5 % and statistical uncertainty of the peak area determination and (2) the procedure applying the dedicated ERON program for calculating uncertainty. Performance of altogether 31 certified values was tested by means of calculating E _n numbers. For the remaining 52 non-certified values, comparison between uncertainties obtained by the two approaches was made. When using the first approach, the E _n number showed satisfactory performance in 28 cases; by using the second approach, the E _n number showed satisfactory performance in 27 cases. None of the unsatisfactory performances (E _n  > 1) appeared to be of systematic nature. The uncertainties obtained by applying the two approaches revealed a big extent of consistency. As the present nuclear database lacks lot of data that serve as input to the ERON program, in particular uncertainties of Q ₀ factors, estimates need to be introduced for the missing values, emphasising the urgent need to upgrade the database with missing data.     

Understanding the Chloride Affinity of Barbiturates for Anion Receptor Design

Due to their potential binding sites, barbituric acid (BA) and its derivatives have been used in metal coordination chemistry. Yet their abilities to recognize anions remain unexplored. In this work, we were able to identify four structural features of barbiturates that are responsible for a certain anion affinity. The set of coordination interactions can be finely tuned with covalent decorations at the methylene group. DFT-D computations at the BLYP-D3(BJ)/aug-cc-pVDZ level of theory show that the C−H bond is as effective as the N−H bond to coordinate chloride. An analysis of the electron charge density at the C−H⋅⋅⋅Cl⁻ and N−H⋅⋅⋅Cl⁻ bond critical points elucidates their similarities in covalent character. Our results reveal that the special acidity of the C−H bond shows up when the methylene group moves out of the ring plane and it is mainly governed by the orbital interaction energy. The amide and carboxyl groups are the best choices to coordinate the ion when they act together with the C−H bond. We finally show how can we use this information to rationally improve the recognition capability of a small cage-like complex that is able to coordinate NaCl.     

Comparison of the Effect of Hydrostatic and Dynamic High Pressure Processing on the Enzymatic Activity and Physicochemical Quality Attributes of ‘Ataulfo’ Mango Nectar

The effects of hydrostatic (HHP) and dynamic (HPH) high-pressure treatments on the activity of pectin methylesterase (PME) and polyphenol oxidase (PPO) as well as the physicochemical quality attributes of ‘Ataulfo’ mango nectar were assessed. HHP reduced PME relative activity by 28% at 100 MPa for 5 min but increased PPO activity almost five-fold. Contrarily, HPH did not affect PME activity, but PPO was effectively reduced to 10% of residual activity at 300 MPa and at three passes. Color parameters (CIEL*a*b*), °hue, and chroma were differently affected by each type of high-pressure processing technology. The viscosity and fluid behavior were not affected by HHP, however, HPH changed the apparent viscosity at low dynamic pressure levels (100 MPa with one and three passes). The viscosity decreased at high shear rates in nectar samples, showing a shear-thinning effect. The results highlight how different effects can be achieved with each high-pressure technology; thus, selecting the most appropriate system for processing and preserving liquid foods like fruit beverages is recommended.