Catalysis by Ir(III), Rh(III) and Pd(II) metal ions in the oxidation of organic compounds with H2O2

Catalytic activities of three transition metals, as iridium (III) chloride, rhodium (III) chloride and palladium (II) chloride, were compared in the oxidation of six aromatic aldehydes (benzaldehyde, p‐chloro benzaldehyde, p‐nitro benzaldehyde, m‐nitro benzaldehyde, p‐methoxy benzaldehyde and cinnamaldehyde), two hydrocarbons (viz. (anthracene and phenanthrene)) and one aromatic and one cyclic alcohol (cyclohexanol and benzyl alcohol) by 50% H₂O₂. The presence of traces (substrate: catalyst ratio equal to 1:62500 to 1:1961) of the chlorides of iridium(III), rhodium(III) and palladium(II) catalyze these oxidations, resulting in good to excellent yields. It was observed that in most of the cases palladium(II) chloride is the most efficient catalyst. Conditions for the highest and most economical yields were obtained. Deviation from the optimum conditions decreases the yields. Oxidation in aromatic aldehydes is selective at the aldehydeic group only and other groups remain unaffected. This new, simple and economical method, which is environmentally safe, also requires less time. Reactive species of catalysts, existing in the reaction mixture are also discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

HPTLC method for determination of nevirapine in pharmaceutical dosage form

A sensitive, selective, precise and stability-indicating high-performance thin-layer chromatographic method of analysis of nevirapine both as a bulk drug and in formulations was developed and validated. The solvent system consisted of toluene-carbon tetrachloride-methanol-acetone-ammonia (3.5:3.5:2.0:1.0:0.05, v/v/v/v/v). Densitometric analysis of nevirapine was carried out in the absorbance mode at 289nm. This system was found to give compact spots for nevirapine (R(f) value of 0.44+/-0.02). Nevirapine was subjected to acid and alkali hydrolysis, oxidation, dry heat and wet heat treatment and photodegradation. The drug undergoes degradation under acidic, basic conditions and oxidation. Also the degraded products were well resolved from the pure drug with significantly different R(f) values. Linearity was found to be in the range of 30-1000ng/spot with significantly high value of correlation coefficient. The linear regression analysis data for the calibration plots showed good linear relationship with r(2)=0.998+/-0.002 in the working concentration range of 300ng/spot to 1000ng/spot. The mean value of slope and intercept were 0.073+/-0.005 and 36.78+/-1.50, respectively. The method was validated for precision, robustness and recovery. The limit of detection and quantitation were 5 and 10ng/spot, respectively. As the method could effectively separate the drug from its degradation products, it can be employed as a stability indicating one. Moreover, the proposed HPTLC method was utilized to investigate the kinetics of acid degradation process. Arrhenius plot was constructed and activation energy was calculated.     

Computation of pressure drop for dilute gas-solid suspension across thin and thick orifices

The present work deals with the computation of the gas-solid two-phase flow pressure drop across thin and thick orifices for a vertically downward flow configuration at the higher limits of a dilute phase flow situation(0.01≤αs,in≤0.10).The Eulerian-Eulerian(two-fluid)model has been used in conjunction with the kinetic theory of granular flow with a four-way coupling approach.The validation of the solution process has been performed by comparing the computational result with the existing experimental data.It is observed that the two-phase flow pressure drop across the orifice increases with an increase in the thickness of the orifice,and the effect is more prominent at higher solid loading.The pressure drop is found to increase with an increase in the solid volume fraction.An increase in the Reynolds number or the area ratio increases the pressure drop.An increase in the size of the particles reduces the pressure drop across the orifice at both small and relatively large solid volume fractions.Finally,a two-phase multiplier has been proposed in terms of the relevant parameters,which can be useful to evaluate the gas-solid two-phase flow pressure drop across the orifice and can subsequently help to improve the system performance.     

Positive pion photoproduction from hydrogen at photon energies between 500 MeV and 1,400 MeV in forward direction

The differential cross section of the reactionγ+p→π ⁺ was measured at pion CM-angles of 20° and 30° for photon energies between 500 MeV and 1,400 MeV. The pions were detected in a magnetic spectrometer. By measuring each pion trajectory and by offline calculation of the initial pion parameters an energy resolution of about 2.5% FWHM was achieved. The results complete a set of data which were measured in recent years at the Bonn 2.5 GeV synchrotron. In comparison to photoproduction analyses two effects were revealed: The η cusp appears in the energy dependence of the cross section as a sharp drop atK _γ=710 MeV. In the region of the third resonance the data show a greater enhancement than predicted by most of the analyses.     

Magnetic and martensitic transitions in Ni-Fe-Ga alloy

The ferromagnetic shape memory alloy with nominal composition Ni₅₄Fe₁₉Ga₂₇ is investigated by Ac susceptibility and resistivity measurements. The alloy shows long-range ferromagnetic order below 290 K. The anomaly due to the martensitic transition is observed in the susceptibility and resistivity data in the temperature range around 220 K, which is associated with clear thermal hysteresis. Minor hysteresis loop technique was used to investigate the phase coexistence across the martensitic transition, and our analysis indicate that both martensite and austenite phases mutually coexist in the region of hysteresis.     

Enhancement in nucleate pool boiling heat transfer on nano-second laser processed copper surfaces

ABSTRACT

The present paper reports the experimental investigation of pool boiling heat transfer on multiscale functionalized copper surfaces. Multiscale functionalized surfaces are fabricated by employing the nano-second laser surface process (NLSP) technique. The heat transfer coefficients (HTCs) of functionalized surfaces are estimated experimentally by using water and acetone as pool liquid. Tests are performed at atmospheric pressure, and saturated pool boiling condition with heat flux varyies between 0 and 330 kW/m². The maximum HTCs for functionalized surface and reference polished surface were found to be 41,500 W/m²K and 23,000 W/m²K, respectively, with water and 22,000 W/m²K and 14,000 W/m²K, respectively, with acetone.     

Elastic,impedance spectroscopic and dielectric properties of TiO2 doped nanocrystalline NiCuZn spinel ferrites

ABSTRACT

Nanocrystalline Ni_0.4Cu_0.3Zn_0.3Fe₂O₄ ferrites doped with TiO₂ (0–10?wt %) were prepared by the sol-gel method. Elastic properties of synthesized samples were studied with the help of ultrasonic pulse transmission method. The elastic constants initially increase with an increase in TiO₂ up to 1?wt % and then decline. LCR-Q meter was used to study the dielectric properties within 50?Hz to 5?MHz range of the frequency. The dielectric constant (?′) and dielectric loss tangents were decreased continuously with increased frequency for all the selected samples at room temperature revealing normal dielectric behavior of ferrites. Also, the AC conductivity was increased with an increase in the frequency for all the selected samples. Cole-Cole plots were obtained for all investigated samples and showed single semicircle which indicates that the electrical conduction process appears only due to grain boundaries.     

Search for anomalous interaction mean free paths of charge, 2≦Z≦18 projectile fragments in emulsions exposed to 1.8 A GeV40Ar ions

⁴⁰Ar-emulsion interactions are studied, to investigate the question of anomalons, in twoG- 5 emulsion stacks. In about 4600 primary interactions, projectile fragments of Z≧2 for all generations have been followed until they interact or leave the stack. After careful estimation of charges of these fragments, variation of their mean free paths is studied as a function of distance from the preceding interaction. Generation effect,N _h dependence and production angle effect are investigated. In addition multi-chain events are analysed separately. Our results do not show anomalons at the 6% level and are consistent with non-occurrence of anomalons. However, this experiment is not sensitive enough to rule out anomalons (with a mfp of the order of 2 to 3 cm) produced at about 1% (or less) level.     

Photoproduction of neutral pions in the region of the fourth nucleon resonance

We report the measurement of the differential cross section of the reaction γ +p→π⁰ +p at a photon energy of 1.4 GeV and pion c.m. angles between 60 and 175 degrees. The angular distribution confirms the simple quark model prediction of a pure magnetic excitation of theF ₃₇ (1950) resonance.