Extension of the range of resonator scanning spectrometer into submillimeter band and some perspectives of its further developments

Extension of the working frequency of modern resonator spectrometers into submillimeter wave range is described. Experimental record of atmospheric absorption spectrum covering 45-370 GHz range is demonstrated for the first time, and measured water vapor J′_{ka′, kc′}-J_{ka, kc} = 5_1,5-4_2,2 at 325 GHz line parameters are presented. For the first time pressure lineshift for the 325-GHz water vapor line is measured. Further extension of working range is discussed. New estimations of physical limits of time needed for measurements of absorption in the whole Backward Wave Oscillator (BWO) range are given for phase continuous synthesizer regime. Basic schemes of fast broadband continuous phase synthesized sources are discussed. Verification of the previous measurements of water vapor 3_1,3-2_2,0 at 183 GHz line parameters is presented. Comparisons with ringdown resonator spectrometers are given.     

Q value related mass determinations using a Penning trap

We report here about measurements of reaction and decay Q values by precise determination of pairs of atomic masses. These were performed with the Penning trap mass spectrometer SMILETRAP. Measurements with Penning traps give reliable and accurate masses, in particular Q values, due to the fact that certain systematic errors to a great deal cancel in the mass difference between the two atoms defining the Q value. Some Q values that are of fundamental interest will be discussed here, for example, a new Q value for the ⁶Li (n,γ) ⁷Li reaction, for the β-decay of tritium, related to properties of the electron neutrino mass, and for the neutrino-less double β-decay of ⁷⁶Ge, related to the question of whether the neutrino is a Majorana particle or not. In case of the latter two we report the most accurate Q values, namely 18,589.8(12) eV for the tritium decay and 2,038.997(46) keV for the neutrino-less double β-decay of ⁷⁶Ge.     

Quantitation in capillary electrophoresis-mass spectrometry

CE-MS has evolved into a strong alternative to LC-MS. Most of CE-MS applications deal with characterization and identification. However, quantitative aspects have gained importance in, e.g., pharmaceutical and biotechnological applications. Here we summarize and evaluate various methodological aspects in order to achieve sensitive and reproducible results. Similar to LC-MS, aspects of matrix influence on the electrospray process need to be carefully addressed when quantitative results are intended by CE-MS. Due to a more complicated coupling special emphasis needs to be put on the CE-MS interface. Generally linearity over more than three orders of magnitude can be achieved by CE-ESI-MS. Furthermore, a literature survey has been performed in order to give an overview over quantitative measurements performed by CE-MS. The precision can be doubled when changing from a structural related to an isotopically labeled internal standard. Thus a level of precision better than 5% RSD can be achieved.     

农业供应链金融能有效缓解企业的融资约束？——涉农企业参与精准扶贫的实证研究

农业供应链金融为涉农企业融资难问题提供了新思路。本文以上市涉农上市企业2016~2018年的财务数据为样本,探讨了农业供应链金融对缓解企业融资约束的影响,以及涉农企业参与精准扶贫对缓解融资约束的调节作用。研究发现:涉农企业普遍面临融资约束问题,而农业供应链金融显著缓解了涉农企业的融资约束,且对参与精准扶贫企业的融资约束缓解更为显著。本文揭示了:农业供应链金融能有效缓解涉农企业的融资约束问题,再次证明了农业供应链金融缓解涉农企业融资约束的重要性和必要性,拓展了供应链金融研究的领域,同时对企业参与精准扶贫,响应新时期涉农企业社会责任的具体要求,形成政府、企业等共同承担社会责任的多元化减贫治理机制,助力乡村振兴提供相应借鉴。     

基于重复博弈的地方政府精准扶贫合作机制研究

精准扶贫是习近平总书记为彻底解决贫困问题而提出一项战略要求。精准扶贫是一项复杂性较高、涉及范畴较广的系统工作,其工作的展开需要由地方政府共同协作完成。地方政府合作周期长短对精准扶贫有着巨大的影响,基于博弈论的基本思想方法,针对地方政府精准扶贫合作机制进行研究。首先,针对精准扶贫过程中完全信息静态博弈的情况,构建地方政府合作与非合作的无限次重复博弈模型,并分析双方政府均采取冷酷战略时,彼此合作的临界贴现因子;然后,针对精准扶贫过程中地方政府合作周期长短对精准扶贫成效的问题,探讨了有限重复博弈模型的临界贴现因子与地方政府合作周期的关系。分析表明:在精准扶贫过程中,双方政府合作周期越长,临界贴现因子越小,精准扶贫合作的稳定性越强。最后,针对精准扶贫过程中地方政府合作周期和合作机制等提出对策和建议。     

Robust estimates of the theoretical standard deviation to be used in interlaboratory precision experiments

Interlaboratory experiments often contain results that strongly deviate from other results obtained in the same laboratory under repeatability conditions, or laboratory means that strongly deviate from other laboratory means. In ISO 5725-2 [1] and IUPAC [2], the basic standards for the organisation and analysis of interlaboratory experiments for the determination of precision of a measurement method, outlier tests are performed in order to detect such situations and to finally decide whether these values are retained in the analysis or discarded as outliers. This outlier treatment, which always has a subjective aspect, becomes unnecessary by using robust estimates of the repeatability and reproducibility standard deviation. This paper proposes to use Rousseeuw’s Q _n as an extremely robust and efficient estimate of the standard deviation. Two examples show the performance of the new method.     

Patterns in the precision of quantitative data from multicomponent gas chromatographic or gas chromatographic-mass spectrometric analysis

The dispersion of the quantitative results in the analysis of volatile compounds from multicomponent mixtures by different fractionation techniques (solid-phase microextraction and direct thermal desorption) followed by GC or GC-MS presents nonrandom patterns related to the existence of different factors in the fractionation process or in the chromatographic separation which affect, to a different extent, the recovery of the sample components. Statistical techniques have been used to show the relative importance of these factors. The improvement in data precision achieved by using volatile compound concentration ratios is discussed.     

Precise and accurate quantitative C NMR with reduced experimental time

In order to detect small variations in ¹³C isotopomers concentrations, high sensitivity, accuracy and precision have to be achieved. To assess such criteria, when using ¹³C NMR, ¹³C bi-labelled ethanol has been proposed as a molecular probe. Advantage has been taken of the pre-established structural relationship between the peak areas of the ¹³C NMR spectrum of this molecule, i.e. the ratio of signal areas is set to a fixed value. It is shown that the quality performance, required by quantitative ¹³C NMR spectroscopy, is not affected by a large reduction of the repetition delay using relaxation reagents.     

蒸发器支撑板板孔精密测量系统

建立了蒸发器支撑板板孔精密测量系统,并提出了基于边缘约束条件的轮廓参量测量方法.首先采用图像处理技术将待测目标转化为二维离散坐标点,计算其最小外接矩形并对轮廓进行预定位;然后将轮廓分割成相互重合的"扩展邻域轮廓",建立以曲率角为原则的边缘约束算法对各轮廓段精确定界,实现对轮廓参量的精密测量.实验和误差分析表明,该系统测量准确度优于0.02mm,对具有复杂轮廓的零件参量测量有参考价值.     

某机载瞄准系统精度评估测试方法

为了评估某型机载瞄准系统的精度,根据飞行试验参数测试需要,提出了通过图像测量与DGPS融合处理方法进行瞄准精度评估的试验方案。该方案利用飞行试验获取的图像数据与其他测量数据相结合,建立精度评估的方法,该评估方法在该机载武器瞄准系统精度评估得到应用,并且可在同类试验课题中推广应用。