Every diassociative A-loop is Moufang

An A-loop is a loop in which every inner mapping is an automorphism. A problem which had been open since 1956 is settled by showing that every diassociative A-loop is Moufang.

     

INFLUENCE OF A LEVELNESS DEFECT IN A THRUST BEARING ON THE DYNAMIC BEHAVIOUR OF AN ELASTIC SHAFT

This paper examines the non-linear dynamic behaviour of a flexible shaft. The shaft is mounted on two journal bearings and the axial load is supported by a defective hydrodynamic thrust bearing at one end. The defect is a levelness defect of the rotor. The thrust bearing behaviour must be considered to be non-linear because of the effects of the defect. The shaft is modelled with typical beam finite elements including effects such as the gyroscopic effects. A modal technique is used to reduce the number of degrees of freedom. Results show that the thrust bearing defects introduce supplementary critical speeds. The linear approach is unable to show the supplementary critical speeds which are obtained only by using non-linear analysis.     

Electron spin lifetimes in Hg0.78Cd0.22 Te and InSb

We have made direct pump–probe measurements of spin lifetimes in long wavelength narrow-gap semiconductors at wavelengths between 4 and 10 μm and from 4 to 300 K. In particular, we measure remarkably long spin lifetimes, τ_s300 ps, even at 300 K for epilayers of degenerate n-type InSb. In this material the mobility is approximately constant between 77 and 300 K, and we find that τ_s is approximately constant in this temperature range. In order to determine the dominant spin relaxation mechanism we have investigated the temperature dependence of τ_s in non-degenerate lightly n-type Hg_0.78Cd_0.22Te of approximately the same band gap as InSb, and find that τ_s varies from 356 ps at 150 K to 24 ps at 300 K. Our results, both in magnitude and temperature dependence of τ_s, imply that the Elliott–Yafet model dominates in these materials.     

Photopolymerization of 1,6‐hexanedioldiacrylate initiated by three‐component systems based on N‐arylphthalimides

Three‐component photoinitiators comprised of an N‐arylphthalimide, a diarylketone, and a tertiary amine were investigated for their initiation efficiency of acrylate polymerization. The use of an electron‐deficient N‐arylphthalimide resulted in a greater acrylate polymerization rate than an electron‐rich N‐arylphthalimide. Triplet energies of each N‐arylphthalimide, determined from their phosphorescence spectra, and the respective rate constants for triplet quenching by the N‐arylphthalimide derivatives (acquired via laser flash photolysis) indicated that an electron–proton transfer from an intermediate radical species to the N‐arylphthalimide (not energy transfer from triplet sensitization) is responsible for generating the initiating radicals under the conditions and species concentrations used for polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4009–4015, 2004     

Solvent‐ and interface‐induced surface segregation in blends of isotactic polypropylene with poly(ethylene‐co‐propylene) rubber

The surface compositions and morphologies of melt‐quenched blends of isotactic polypropylene (iPP) with aspecific poly(ethylene‐co‐propylene) rubber (aEPR) were characterized by atomic force microscopy, optical microscopy, and X‐ray photoelectron spectroscopy. The surface morphologies and compositions formed in the melt are frozen‐in by crystallization of the iPP component and, depending on the processing conditions, are enriched in iPP or aEPR or contain a phase‐separated mix of iPP and aEPR. Enrichment of iPP is observed for blends melted in open air, in agreement with earlier work showing the high surface activity of atactic polypropylene at open interfaces. Surface segregation of iPP is suppressed at confined interfaces. Blends melt‐pressed between hydrophilic and hydrophobic substrates have phase‐separated iPP and aEPR domains present at the surface, which grow in size as the melt time increases. Surface enrichment of aEPR is observed after exposing melt‐pressed blends to n‐hexane vapor, which preferentially solvates aEPR and draws it to the surface. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 421–432, 2004     

Probing met repressor-operator recognition in solution.

The three-dimensional crystal structure of the Escherichia coli methionine repressor, MetJ, complexed with a DNA operator fragment is described in an accompanying article. The complex exhibits several novel features of DNA-protein interaction. DNA sequence recognition is achieved largely by hydrogen-bond contacts between the bases and amino-acid side chains located on a beta-ribbon, a mode of recognition previously hypothesized on the basis of modelling of idealized beta-strands and DNA, and mutagenesis of the Salmonella phage P22 repressors Arc and Mnt. The complex comprises a pair of MetJ repressor dimers which bind to adjacent met-box sites on the DNA, and contact each other by means of a pair of antiparallel alpha-helices. Here we assess the importance of these contacts, and also of contacts that would be made between the C-helices of the protein and DNA in a previous model of the complex, by studying mutations aimed at disrupting them. The role of the carboxy-terminal helix face in operator binding was unclear, but we demonstrate that recognition of operator sequences occurs through side chains in the beta-strand motif and that dimer-dimer interactions are required for effective repression.     

Global Analysis of the Flows of Fluids with Pressure-Dependent Viscosities

 To describe the flows of fluids over a wide range of pressures, it is necessary to take into account the fact that the viscosity of the fluid depends on the pressure. That the viscosity depends on the pressure has been verified by numerous careful experiments. While the existence of solutions local-in-time to the equations governing the flows of such fluids are available for small, special data and rather unrealistic dependence of the viscosity on the pressure, no global existence results are in place. Our interest here is to establish the existence of weak solutions for spatially periodic three-dimensional flows that are global in time, for a large class of physically meaningful viscosity-pressure relationships. (Accepted May 1, 2002) Published online November 15, 2002 Communicated by S. S. ANTMAN     

Direct laser ablation of sub-100 nm line structures into polyimide

Periodic line structures with a period of 167 nm and linewidths varying from 30 to 100 nm have been produced in polyimide by direct ablation with a KrF laser using an interferometric technique. The characteristics of this interferometer as it applies to the ablation of these line structures, including linewidth and alignment sensitivity, are analyzed. The ability to control the linewidth by varying the average incident fluence is described theoretically and demonstrated experimentally. This externally generated period of 167 nm also prevents the spontaneous growth of laser induced periodic surface structures (LIPSS).