A 300-MHz 25-/spl mu/A/Mb-leakage on-chip SRAM module featuring process-variation immunity and low-leakage-active mode for mobile-phone application processor

An on-chip 1-Mb SRAM suitable for embedding in the application processor used in mobile cellular phones was developed. This SRAM supports three operating modes - high-speed active mode, low-leakage low-speed active mode, and standby mode - and uses a subdivisional power-line control (SPC) scheme. The combination of three operating modes and the SPC scheme realizes low-power operation under actual usage conditions. It operates at 300 MHz, with leakage of 25 /spl mu/A/Mb in standby mode, and 50 /spl mu/A/Mb at the low-leakage active mode. This SRAM also uses a self-bias write scheme that decreases of minimum operating voltage by about 100 mV.     

90-nm process-variation adaptive embedded SRAM modules with power-line-floating write technique

The power consumption of a low-power system-on-a-chip (SoC) has a large impact on the battery life of mobile appliances. General SoCs have large on-chip SRAMs, which consume a large proportion of the whole LSI power. To achieve a low-power SoC, we have developed embedded SRAM modules, which use some low-power SRAM techniques. One technique involves expanding the write margin; another is a power-line-floating write technique, which enables low-voltage write operation. The power-line-floating write technique makes it possible to lower the minimum operating supply voltage by 100 mV. The other techniques involve using a process-variation-adaptive write replica circuit and reducing leakage current. These techniques reduce active power during write operations by 18% and reduce active leakage of the word-line driver by 64%. The prototype SRAM modules achieve 0.8-V operation, and a 512-kb SRAM module achieves 48.4-/spl mu/A active leakage and 7.8-/spl mu/A standby leakage with worst-leakage devices.     

VISUAL PIGMENTS—10. SPECTROSCOPY AND PHOTOPHYSICAL DYNAMICS OF RETINOL AND RETINYL ETHER

Abstract— The absorption and emission spectra, lifetimes and quantum yields of all-trans retinol have been examined as a function of solvent and temperature. In addition, the spectroscopy of retinyl ether and 2 other polyene alcohols have been determined. Based on the results obtained, we conclude that the singlet excited state of retinol and retinyl cther is of a forbidden character and of the type loosely called ¹A^-_g. Retinol forms a dimer in an alkane solvent when cooling from 298 to 77 K. A general structure for the dimer is proposed.     

Radiation-induced polymerization of cyclohexene sulfide in the solid state

Radiation-induced solid-state polymerization of cyclohexene sulfide has been investigated. Differential thermal analysis shows that this compound has a phase transition point at ?74°C and behaves as a plastic crystal in the temperature range from ?74 to ?20°C (melting point). By rapid cooling, this plastic crystal was easily supercooled, and below ?166°C a glassy crystal, i.e., a supercooled nonequilibrium state of plastic crystal, was obtained. In-source polymerization proceeded in the plastic crystalline state. Postpolymerization of glassy crystalline monomer irradiated at ?196°C occurred above ?166°C (glass transition point) during subsequent heating.     

A study of novel heat-resistant polymers: Preparation of photosensitive fluorinated polybenzoxazole precursors and physical properties of polybenzoxazoles derived from the precursors

A series of novel photosensitive polybenzoxazole precursors were prepared from polycondensation of 2,2-bis(3,3′-amino-4,4′-hydroxyphenyl)hexafluoropropane with photosensitive dicarboxylic acid chlorides such as p-phenylenediacryloyl chloride and benzophenone-4,4′-dicarboxylic chloride. The precursors are soluble in common organic solvents owing to the presence of perfluoromethyl groups in the chain structure, and insolubilized in the solvents on irradiation with the light. Polybenzoxazole patterns with high resolution as well as high aspect ratio were reproduced by baking the precursor patterns at 300°C. The pattern shrinkage on the conversion to polybenzoxazole was slight. The polybenzoxazole films offered good heat-resistance up to 400°C in addition to good electrical properties.     

Regioselectivity in palladium-indium iodide-mediated allylation reaction of glyoxylic oxime ether and N-sulfonylimine

Allylation reaction of electron-deficient imines with allylic alcohol derivatives in the presence of a catalytic amount of palladium(0) complex and indium(I) iodide was studied. The reversibility of allylation was observed in the reaction of glyoxylic oxime ether having camphorsultam. As the important effect of water on regioselectivity, the gamma-adducts were kinetically formed from monosubstituted allylic reagents in the presence of water. The selective formation of thermodynamically stable alpha-adducts was observed in anhydrous THF. In contrast, the allylation of N-sulfonylimine gave the gamma-adducts with high regioselectivities even under anhydrous reaction conditions.     

The participation of the anion and alkyl substituent of diaryliodonium salts in photo‐initiated cationic polymerization reactions

The photo‐initiated cationic polymerization (PCP) of epoxides using diaryliodonium salt photoacid generators (PAGs) bearing alkyl groups and anions was investigated. The properties and reactivities of a series of iodonium salts containing various cations and anions were compared in the context of a PCP reaction. The products from the decomposition of the cations of these salts were analyzed using gas chromatography‐mass spectrometry (GC‐MS) spectra. The relationship between the molecular structure of the salts and their reaction mechanism in the PCP reaction was investigated. Based on the results of the investigation, it was concluded that the structures of the cations and anions of theiodonium salts affect the PCP reaction rate, which was controlled by the products from the diaryliodonium salts. As part of an additional investigation, the diaryliodonium salts‐epoxide materials were applied to 254 nm‐photo‐patterning. Copyright © 2006 John Wiley & Sons, Ltd.     

Destabilization of whole skin lipid bio-liposomes induced by skin penetration enhancers and FT-IR/ATR (Fourier transform infrared/attenuated total reflection) analysis of stratum corneum lipids.

Whole skin lipid bio-liposomes (skin bio-liposomes), in size ranging from 2 to 8 microns, were prepared by a reverse phase evaporation technique using rat full thickness skin. Leakage of an encapsulated fluorescence probe, ANTS (delta-amino-1,3,6-naphthalene-trisulfonate), was measured by adding transdermal penetration enhancers (penetrants) into the medium where the skin bio-liposomes were present. Oleylamine induced a fast release of ANTS from the liposomes compared to lauryl-amine which showed a weak action. With these penetrants, the degree of ANTS release from the prepared bio-liposomes was found to correlate well with the results of frequency changes in the CH-asymmetric stretching band near 2920 cm-1 in the rat stratum corneum. The penetrant which caused relatively strong leakage of ANTS induced the significantly large shift of the peak toward the higher wave-numbers due to the perturbation in the structure of lipids of the stratum corneum. The skin bio-liposomes prepared from the rat full thickness skin could be useful in evaluating the penetrants.     

Subsecond luminescence intensity fluctuations of single CdSe quantum dots

Photoluminescence (PL) intermittency characteristics are examined for single quantum dots (QDs) in a CdSe QD sample synthesized at a slow rate at 75 degrees C. Although the PL quantum efficiency was relatively low ( approximately 0.25), we noticed that the PL intensity of single CdSe QDs fluctuated on a subsecond time scale with short-lived "on" and "off" states. The subsecond PL intensity fluctuations of CdSe QDs are different from "on" and "off" PL blinking generally observed for QDs fluctuating on a millisecond to minute time scale. We characterized single QDs by identifying polarized excitations, topographic imaging using atomic force microscopy (AFM), and transmission electron microscopy (TEM). From analysis of the PL intensity trajectories from >100 single CdSe QDs, the average intermittency time was 213 ms. From the PL quantum efficiency, slow growth of QDs, intensity trajectory analyses, and previous reports relating surface trap states and PL properties of QDs, we attribute the subsecond PL intensity fluctuations of single CdSe QDs and short-lived "on" and "off" states to a high-density distribution of homogeneous surface trap states.