Eco‐friendly ionic liquid assisted capillary electrophoresis and α‐acid glycoprotein‐assisted liquid chromatography for simultaneous determination of anticancer drugs in human fluids

In the current work, two eco‐friendly analytical methods based on capillary electrophoresis (CE) and reversed phase liquid chromatography (RPLC) were developed for simultaneous determination of the most commonly used anticancer drugs for Hodgkin's disease: methotrexate (MTX), vinblastine, chlorambucil and dacarbazine. A background electrolyte (BGE) of 12.5 mmol/L phosphate buffer at pH 7.4 and 0.1 µmol/L 1‐butyl‐3‐methyl imidazolium bromide (BMImBr) ionic liquid (IL) was used for CE measurements at 250 nm detection wavelength, 20 kV applied voltage and 25 °C. The rinsing protocol was significantly improved to reduce the adsorption of IL on the interior surface of capillary. Moreover, RPLC method was developed on α‐1‐acid glycoprotein (AGP) column. Mobile phase was 10 mmol/L phosphate buffer at pH 6.0 (100% v/v) and flow rate at 0.1 mL/min. As AGP is a chiral column, it was successfully separated l ‐MTX from its enantiomer impurity d ‐MTX. Good linearity of quantitative analysis was achieved with coefficients of determinations (r²) >0.995. The stability of drugs measurements was investigated with adequate recoveries up to 24 h storage time under ambient temperature. The limits of detection were <50 and 90 ng/mL by CE and RPLC, respectively. The using of short‐chain IL as an additive in BGE achieved 600‐fold sensitivity enhancement compared with conventional Capillary Zone Electrophoresis (CZE). Therefore, for the first time, the proposed methods were successfully applied to determine simultaneously the analytes in human plasma and urine samples at clinically relevant concentrations with fast and simple pretreatments. Developed IL‐assisted CE and RPLC methods were also applied to measure MTX levels in patients’ samples over time. Copyright © 2014 John Wiley & Sons, Ltd.     

Computational Design of Novel Allosteric Inhibitors for Plasmodium falciparum DegP

The serine protease, DegP exhibits proteolytic and chaperone activities, essential for cellular protein quality control and normal cell development in eukaryotes. The P. falciparum DegP is essential for the parasite survival and required to combat the oscillating thermal stress conditions during the infection, protein quality checks and protein homeostasis in the extra-cytoplasmic compartments, thereby establishing it as a potential target for drug development against malaria. Previous studies have shown that diisopropyl fluorophosphate (DFP) and the peptide SPMFKGV inhibit E. coli DegP protease activity. To identify novel potential inhibitors specific to PfDegP allosteric and the catalytic binding sites, we performed a high throughput in silico screening using Malaria Box, Pathogen Box, Maybridge library, ChEMBL library and the library of FDA approved compounds. The screening helped identify five best binders that showed high affinity to PfDegP allosteric (T0873, T2823, T2801, {"type":"entrez-protein","attrs":{"text":"RJC02337","term_id":"1480409465","term_text":"RJC02337"}}RJC02337, CD00811) and the catalytic binding site (T0078L, T1524, T2328, BTB11534 and 552691). Further, molecular dynamics simulation analysis revealed {"type":"entrez-protein","attrs":{"text":"RJC02337","term_id":"1480409465","term_text":"RJC02337"}}RJC02337, BTB11534 as the best hits forming a stable complex. WaterMap and electrostatic complementarity were used to evaluate the novel bio-isosteric chemotypes of {"type":"entrez-protein","attrs":{"text":"RJC02337","term_id":"1480409465","term_text":"RJC02337"}}RJC02337, that led to the identification of 231 chemotypes that exhibited better binding affinity. Further analysis of the top 5 chemotypes, based on better binding affinity, revealed that the addition of electron donors like nitrogen and sulphur to the side chains of butanoate group are more favoured than the backbone of butanoate group. In a nutshell, the present study helps identify novel, potent and Plasmodium specific inhibitors, using high throughput in silico screening and bio-isosteric replacement, which may be experimentally validated.     

A short note on the entrainment and exit boundary conditions

An attempt is made to find out the suitable entrainment and exit boundary conditions in laminar flow situations. Streamfunction vorticity formulation of the Navier–Stokes equations are solved by ADI method. Two‐dimensional laminar plane wall jet flow is used to test different forms of the boundary conditions. Results are compared with the experimental and similarity solution and the proper boundary condition is suggested. The Kind 1 boundary condition is recommended. It consists of zero first derivative condition for velocity variable and for streamfunction equation, mixed derivative at the entrainment and exit boundaries. Copyright © 2005 John Wiley & Sons, Ltd.     

Extractive spectrophotometric determination of Cobalt(II) in synthetic and pharmaceutical samples using Cyanex 923.

Cyanex 923 has been proposed as a sensitive analytical reagent for the direct extractive spectrophotometric determination of cobalt(II). Cobalt(II) forms a blue-colored complex with Cyanex 923 in the organic phase. The maximum absorbance of the complex is measured at 635 nm. Beer's law was obeyed in the range 58.9 - 589.0 microg of cobalt. The molar absorptivitiy and Sandell's sensitivity of the complex was calculated to be 6.79 x 10920 l mol(-1) cm(-1) and 0.088 microg cm(-2), respectively. The nature of the extracted species was found to be Co(SCN)2 x 2S. An excellent linearity with a correlation coefficient value of 0.999 was obtained for the Co(II)-Cyanex 923 complex. Stability and regeneration of the reagent (Cyanex 923) for reuse is the main advantage of the present method. The method was successfully applied to the determination of cobalt in synthetic mixtures and pharmaceutical samples was found to give values close to the actual ones. Standard alloy samples, such as high-speed tool BCS 484 and 485, have been tested for the determination of cobalt for the purpose of validating the present method. The results of the proposed method are comparable with atomic absorption spectrometry and were found to be in good agreement.     

Measurement of storage time, estimation of ion number and study of absorption line profile in a Paul trap

Europium (Eu⁺) ions were confined in a Paul trap and detected by non-destructive method. Storage time of Eu⁺ ions achieved in vacuum was improved by orders of magnitude employing buffer gas cooling. The experimentally detected signal was fitted to the ion response signal and the total number of ions trapped was estimated. It is found that the peak signal amplitude as well as the product of FWHM and the peak signal amplitude is proportional to the total number of trapped ions. The trapped ion secular frequency was swept at different rates and its effect on the absorption line profile was studied both experimentally and theoretically.     

Thermal desorption of interacting molecules from mixed adlayers

A Monte Carlo simulation method is used to study thermal desorption of gas molecules from mixed adlayers containing two species. The effects of lateral interactions among adatoms and initial surface coverage on the desorption spectra are examined. It is shown that attractive lateral interactions lead to sharper peaks and that desorption occurs at high temperatures, whereas repulsive interactions lead to multiple peak spectra. It is found that interactions between unlike molecules affect the spectra for species with lower desorption energy only, and that the two species desorb together only in certain cases. Lateral interactions also affect the desorption kinetics significantly and very different behavior for the two species may be obtained.     

Synchronized whistlers recorded at Varanasi

Some interesting events of synchronized whistlers recorded at low latitude station Varanasi during magnetic storm period of the year 1977 are presented. The dynamic spectrum analysis shows that the component whistlers are Eckersley whistlers having dispersion 10 s^1/2 and 30 s^1/2. An attempt has been made to explain the dynamic spectra using lightning discharge generated from magnetospheric sources     

High-rate vector quantization for detection

We investigate high-rate quantization for various detection and reconstruction loss criteria. A new distortion measure is introduced which accounts for global loss in best attainable binary hypothesis testing performance. The distortion criterion is related to the area under the receiver-operating-characteristic (ROC) curve. Specifically, motivated by Sanov's theorem, we define a performance curve as the trajectory of the pair of optimal asymptotic Type I and Type II error rates of the most powerful Neyman-Pearson test of the hypotheses. The distortion measure is then defined as the difference between the area-under-the-curve (AUC) of the optimal pre-encoded hypothesis test and the AUC of the optimal post-encoded hypothesis test. As compared to many previously introduced distortion measures for decision making, this distortion measure has the advantage of being independent of any detection thresholds or priors on the hypotheses, which are generally difficult to specify in the code design process. A high-resolution Zador-Gersho type of analysis is applied to characterize the point density and the inertial profile associated with the optimal high-rate vector quantizer. The analysis applies to a restricted class of high-rate quantizers that have bounded cells with vanishing volumes. The optimal point density is used to specify a Lloyd-type algorithm which allocates its finest resolution to regions where the gradient of the pre-encoded likelihood ratio has greatest magnitude.     

Direct and inverse estimates for a new family of linear positive operators

In the present paper we introduce a new family of linear positive operators and study some direct and inverse results in simultaneous approximation.     

Modified Householder iterative method free from second derivatives for nonlinear equations

In this paper, we suggest and analyze a new two-step predictor–corrector type iterative method free from second derivatives for solving nonlinear equations of the type f(x)=0. This new method includes the two-step Newton method as a special case. We prove that the new iterative method is of fourth-order. Several examples are given to illustrate the efficiency of this new method and its comparison with other iterative methods. This method can be considered as a significant improvement of the Newton method and its variant forms.