Energy-efficient video streaming over Bluetooth using rateless coding

Energy-efficient error control for IEEE 802.15.1 (Bluetooth) video communication is proposed. The scheme is based on block-oriented incremental redundancy provided by rateless coding and receiver feedback. Results are presented for time-sensitive video streaming applications under a Markovian channel model. When the proposed algorithm is compared to variations of Bluetooth forward error control, there are improvements of around 3 dB in received video quality and of over 10% in energy efficiency.     

Spectrophotometric and AAS determination of trace amounts of cobalt after preconcentration by using alpha-benzilmonoxime-microcrystalline naphthalene.

The formed cobalt-a-benzilmonoxime complex was adsorbed onto microcrystalline naphthalene. Then it was determined by zero and first derivative spectrophotometry and by atomic absorption spectrophotometry (AAS) after dissolving into chloroform and methylisobutylketone (MIBK), respectively. Under optimum conditions, cobalt in the range of 1.0 - 20.0, 0.4 - 30.0 and 2.5 - 50.0 microg could be determined by spectrophotometry, first derivative spectrophotometry and AAS method, respectively. By the method, a preconcentration factor equal to approximately 30 for cobalt was obtained. The effect of diverse ions on the determination of 5.0 microg cobalt was also studied. The method was successfully applied to some pharmaceuticals and synthetic alloy samples.     

A Symmetric-Impulse Approximation Applied to the Faddeev Theory on the Charge Transfer Amplitude

Off-the-shell anomalous factors of the two-body Coulomb transition matrices appear in the integral form of the Faddeev second-order nuclear-electronic amplitude, for proton-hydrogen charge transfer scattering in a typical nlm → n′l′m′ transition. A symmetric-impulse approximation (SIA) is applied to eliminate these factors and an induction method is proposed to analytically calculate the remaining integrals. The nuclear-electronic amplitude is derived for the general case, and for totally symmetric collisions, in terms of generalized hypergeometric functions of two variables, F ₄, and of one variable, ₃ F ₂, respectively. The angular distribution of the second-order nuclear-electronic charge transfer amplitude shows the Thomas mechanism as a peak or a hump for symmetric and asymmetric collisions. There also exists a peak in the forward angular distribution of the second-order nuclear-electronic amplitude, which partly cancels the kinematic peak in the angular distribution of the charge transfer differential cross sections.     

Layered image coding using the DCT pyramid

A block-based subband image coder that exploits the ability to perform decimation in the discrete cosine transform (DCT) domain to effect a pyramidal data structure is described. The proposed "DCT pyramid" has a distinct feature of improved image rendition properties without the associated blocking artifacts at low bit-rates.     

High temperature reactions of titanium(IV) oxide with some alkali persulfates and their decomposition products

The solid state reactions between TiO₂ and Na₂S₂O₈ or K₂S₂O₈ have been investigated using TG, DTG, DTA, IR, and X-ray diffraction studies in the range of 20 to 1000°C.It has been shown that TiO₂ reacts stoichiometrically (1 : 1) with Na₂S₂O₈ in the range of 160 and 220°C forming the complex sodium monoperoxodisulfato—titanium(IV) as characterized by IR and X-ray analysis. The new complex then decomposes into the reactants above 190°C.An exothermic reaction has been observed between TiO₂ and molten K₂S₂O₇ at mole ratio 1:2 respectively and higher, in the range of 280 and 350°C. The IR and X-ray analyses have shown the formation of a complex namely, potassium tetrasulfato titanium(IV) for which the formula and structure have been proposed. This complex decomposes at higher temperatures into K₂SO₄ and a mixed sulfate of potassium and titanium. The mixed sulfate melts at 620°C and decomposes into K₂SO₄, TiO₂, and the gaseous SO₃.On the other hand, Na₂S₂O₈ decomposes in a special mode producing a polymeric product of Na₁₀S₉O₃₂. Decomposition of this species occurs after melting at 560°C into Na₂SO₄ and sulfur oxides. The decomposition reaction has been proved to be catalysed by TiO₂ itself.     

Zn(II)-selective membrane electrode based on tetra(2-aminophenyl) porphyrin

A new PVC membrane electrode for Zn²⁺ ions based on tetra(2-aminophenyl) porphyrin (TAPP) as membrane carrier is prepared. The sensor exhibits a linear stable response over a wide concentration range (5.0×10⁻⁵ to 1.0×10⁻¹ M) with a slope of 26.5 mV/decade and a limit of detection 3.0×10⁻⁵ M (1.96 ppm). It has a response time of about l0 s and can be used for at least 8 months without any divergence in potential. The propose membrane sensor revealed good selectivities for Zn²⁺ over a wide variety of other metal ions and can be used in pH range of 3.0–6.0. It was successfully applied to the direct determination of zinc in a pharmaceutical sample and also as an indicator electrode in potentiometric titration of Zn²⁺ ions.     

Smart Biopolymer-Based Nanocomposite Materials Containing pH-Sensing Colorimetric Indicators for Food Freshness Monitoring

Nanocomposite biopolymer materials containing colorimetric pH-responsive indicators were prepared from gelatin and chitosan nanofibers. Plant-based extracts from barberry and saffron, which both contained anthocyanins, were used as pH indicators. Incorporation of the anthocyanins into the biopolymer films increased their mechanical, water-barrier, and light-screening properties. Infrared spectroscopy and scanning electron microscopy analysis indicated that a uniform biopolymer matrix was formed, with the anthocyanins distributed evenly throughout them. The anthocyanins in the composite films changed color in response to alterations in pH or ammonia gas levels, which was used to monitor changes in the freshness of packaged fish during storage. The anthocyanins also exhibited antioxidant and antimicrobial activity, which meant that they could also be used to slow down the degradation of the fish. Thus, natural anthocyanins could be used as both freshness indicators and preservatives in biopolymer-based nanocomposite packaging materials. These novel materials may therefore be useful alternatives to synthetic plastics for some food packaging applications, thereby improving the environmental friendliness and sustainability of the food supply.     

Synthesis of Diaryl Ethers Through the Copper-Catalyzed Arylation of Phenols with Aryl Iodides Using KF/Al2O3

An efficient synthesis of diaryl ethers by the copper-catalyzed arylation of phenols with a variety of aryl iodide susing KF/Al₂O₃ as a suitable base and CuI and 1,3 diphenyl-1,3 propandione as the catalyst is described.     

A highly sensitive spectrophotometric determination of ultra trace amounts of azide ion in water and biological samples after preconcentration using dispersive liquid-liquid microextraction technique

A simple and highly sensitive method developed for preconcentration and spectrophotometric determination of ultra trace amounts of azide ion (N ₃ ^? ) in water and biological samples using dispersive liquid-liquid microextraction (DLLME) technique. The method is based on ion association formation of azide ion with malachite green and extraction of the ion pairing product using DLLME technique. Some important parameters, such as reaction conditions and the kind and volume of extraction solvent and disperser solvent were studied and optimized. The calibration curve was linear in the range of 0.5–50 μg/L of azide ion. Also, the enrichment factor and extraction recovery obtained were 24.7 and 98.7%, respectively. The method was applied to the determination of azide ion in water and biological samples.     

Green synthesis of bis-coumarin derivatives using Fe(SD)3 as a catalyst and investigation of their biological activities

A convenient, practical, green, and environmentally friendly method was developed for the synthesis of biscoumarins and corresponding tetrakis products from the reaction of 4-hydroxycoumarin and various aldehydes. The bis-coumarins were synthesized in high yield under mild reaction conditions. Products were obtained in the presence of in situ prepared Fe(SD)₃ [Iron(III) dodecyl sulfate] as a combined Lewis acid–surfactant catalyst (LASC) in water in short reaction times. Also, the antibacterial activity of compounds was screened against Pseudomonas aeruginosa and Escherichia coli as Gram-negative bacteria and Micrococcus luteus and Staphylococcus aureus as Gram-positive bacterial strains. Products 3g , 3k–l were most active than cefotaxime against E. coli and also compounds 3c and 3g were most active than cefotaxime against S. aureus.