Hollow latex particles as submicrometer reactors for polymerization in confined geometries

A method was developed for free‐radical polymerization in the confines of a hollow latex particle. Hollow particles were prepared via the dynamic swelling method from polystyrene seed and divinylbenzene and had hollows of 500–1000 nm. So that these hollow poly(divinylbenzene) particles could function as submicrometer reactors, the particles were filled with a monomer (N‐isopropylacrylamide) via the dispersion of the dried particles in the molten monomer. The monomer that was not contained in the hollows was removed by washing and gentle abrasion. Free‐radical polymerization was then initiated by γ radiolysis in the solid state. Transmission electron microscopy showed that poly(N‐isopropylacrylamide) formed in the hollow interior of the particles, which functioned as submicrometer reactors. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5706–5713, 2004     

Synthesis of perfluorinated functionalized, branched ethers

We wish to report synthesis of perfluorinated functionalized, branched ethers from their hydrocarbon analogues by direct fluorination. Yields up to 90%, with high purities, have been obtained at ambient temperature and pressure. This technique will likely develop into a new general method for producing perfluorinated, hyperbranched and dendritic polymers.     

High-throughput purification of combinatorial libraries I: a high-throughput purification system using an accelerated retention window approach

We have developed a high-throughput purification system to purify combinatorial libraries at a 50-100-mg scale with a throughput of 250 samples/instrument/day. We applied an accelerated retention window method to shorten the purification time and targeted one fraction per injection to simplify data tracking, lower QC workload, and simplify the postpurification processing. First, we determined the accurate retention time and peak height for all compounds using an eight-channel parallel LC/UV/MS system, and calculated the specific preparative HPLC conditions for individual compounds. The preparative HPLC conditions include the compound-specific gradient segment for individual compounds with a fixed gradient slope and the compound-specific UV or ELSD threshold for triggering a fraction collection device. A unique solvent composition or solvent strength was programmed for each compound in the preparative HPLC in order to elute all compounds at the same target time. Considering the possible deviation of the predicted retention time, a 1-min window around the target time was set to collect peaks above a threshold based on UV or ELSD detection. Dual column preparative instruments were used to maximize throughput. We have purified more than 500 000 druglike compounds using this system in the past 3 years. We report various components of this high-throughput purification system and some of our purification results.     

Free-standing metal–organic framework (MOF) monolayers by self-assembly of polymer-grafted nanoparticles

We report a general method for the synthesis of free-standing, self-assembled MOF monolayers (SAMMs) at an air–water interface using polymer-brush coated MOF nanoparticles. UiO-66, UiO-66-NH₂, and MIL-88B-NH₂ were functionalized with a catechol-bound chain-transfer agent (CTA) to graft poly(methyl methacrylate) (PMMA) from the surface of the MOF using reversible addition-fragmentation chain transfer polymerization (RAFT). The polymer-coated MOFs were self-assembled at the air–water interface into monolayer films ∼250 nm thick and capable of self-supporting at a total area of 40 mm². Mixed-particle films were prepared through the assembly of MOF mixtures, while multilayer films were achieved through sequential transfer of the monolayers to a glass slide substrate. This method offers a modular and generalizable route to fabricate thin-films with inherent porosity and sub-micron thickness composed of a variety of MOF particles and functionalities.

We report a general method for the synthesis of free-standing, self-assembled MOF monolayers (SAMMs) at an air–water interface using polymer-brush coated MOF nanoparticles.     

Effect of Enzyme Modification of Corn Grits on their Properties as an Adsorbent in a Skarstrom Pressure Swing Cycle Dryer

Corn grits have been tested as a desiccant in a pressure swing adsorption (PSA) system to produce dry air. Two sizes of unmodified corn grits were tested in the PSA system: 2.16 and 0.978 mm in diameter, which dried moist air to dew points of –42°C and –69°C, respectively. A modification technology has been developed for the corn grits that gives an increase in the operational adsorptive capacity in a pressure swing adsorption system, so that they remove as much moisture from air as molecular sieves at the same conditions. After modification, 2.16 mm corn grits dry moist air to a –56°C dew point and the 0.978 mm corn grits dry air to a –80°C dew point. The modification process creates surface modifications on the corn grits apparently making more adsorption sites easily available. The modification procedure increases the specific surface area of the grits and possibly decreases the crystallinity, which would make more hydroxyl groups available for adsorption of water. Possible applications of using corn grits in the pressure swing adsorption system include industrial gas dryers, sorptive cooling air conditioners, and recycling equipment for industrial solvents.     

Isomers of C20: an energy profile III

Semiempirical calculations, at the PM3 level provided within the Winmopac v2.0 software package, are used to geometrically optimize and determine the absolute energies (heats of formation) of a variety of C(20) isomers that are predicted to exist in and around the ring and cage isomers. Using the optimized Cartesian coordinates for the ring and the cage isomers, a saddle-point calculation was performed. The resulting energy profile, consisting of a series of peaks and valleys, is used as a starting point for the identification and location of fifteen additional isomers of C(20) that are predicted to be energetically stable, both via geometry optimizations and force constant analysis. These additional isomers were subsequently determined to lie adjacent to one another on the potential surface and establish a step-wise transformation between the ring and the cage. Transition-state optimization of the Cartesian coordinates at the saddle point between adjacent isomers was performed to quantify the energy of the transition state. The step-wise process from one isomer to another, which extends out over the three-dimensional surface, is predicted to require approximately 15% less energy than that of the direct, two-dimensional transformation predicted in the bowl-cage profile. However, the net atomic rearrangement for the step-wise process is about four times greater than that of the direct process. Although less in energy, the amount of atomic rearrangement in the step-wise process would make the occurrence of such a route prohibitive. Utilizing the direct distance separating the three primary isomers (ring, bowl, cage), the method of triangulation is performed to quantitatively position other C(20) structures on the potential surface, relative to the ring, bowl, and cage isomers.     

Exponential distributions on semigroups

Three fundamental characterizations of the standard exponential distribution on [0, ) are the remaining life, memoryless and constant failure properties. Analogs of these properties are studied for distributions on a class of semigroups in which the semigroup operation replaces addition, a compatible partial order replaces the ordinary order, and a left-invariant measure replaces Lebesgue measure. Partial characterizations of exponential distributions on such semigroups are obtained and the semigroup formulation provides new characterizations of certain aging properties studied in reliability-increasing failure rate, new better than used, and increasing failure rate average.     

Preparation of ordered large pore SBA-15 silica functionalized with aminopropyl groups through one-pot synthesis

Highly ordered large pore SBA-15 silica functionalized with up to 16% aminopropyl groups, which gave high catalytic activity and selectivity toward flavanone synthesis through aldol condensation and subsequent intramolecular Michael addition of benzaldehyde and 2'-hydroxyacetophenone, was synthesized for the first time via co-condensation of tetraethylorthosilicate (TEOS) and 3-aminopropyltriethoxysilane (APTES) using an amphiphilic block copolymer as the structure-directing agent.     

Micropatterning chemical oscillations: waves, autofocusing, and symmetry breaking

Arrays of chemical oscillators are micropatterned by Wet Stamping. The technique is used to demonstrate that chemical waves can be initiated and controlled in oscillatory systems and that such waves can give rise to phenomena not observed in excitable media. Interoscillator coupling and synchronization, kinetic autofocusing, and twist-symmetry breaking are a consequence of the dependence of the oscillation phase on the local concentrations of reagents and on systems' geometry. Conditions under which a generic oscillatory system would exhibit such behaviors are determined.     

Self-assembling a molecular pegboard

This paper describes the design, construction, and application of a self-assembled, chemically addressable DNA nanogrid composed of DNA tiles of nanometer dimensions. This self-assembled structure permits precise placement of molecules at predetermined locations on a "molecular pegboard". We used the indexed DNA nanogrids to identify single molecules of DNA that hybridize at particular locations.