ANT-colony based disjoint set assortment in wireless sensor networks

Wireless Networks - Wireless sensor network (WSN) consists of small sized devices containing different sensors to monitor physical, environmental and medical conditions during surveillance of...     

New catalytic effect of thiourea on the oxidative cyanation of N-aryltetrahydroisoquinolines

Thiourea itself has been introduced as a mild and efficient organocatalyst for the oxidative α -cyanation of N-aryltetrahydroisoquinolines (THIQs) with trimethylsilyl cyanide (TMSCN), giving the corresponding products in good to excellent yields. Experimental investigations demonstrated that thiourea acts as a radical initiator by abstracting hydroxyl radical (OH) from tert-butyl hydroperoxide (TBHP) directly instead of non-covalent hydrogen bondings (H-bondings) activation. The use of thiourea as a radical initiator offers a new avenue for innovative chemical transformations in organocatalyzed radical chemistry.     

Domino "[3+3]-cyclization-homo-Michael" reactions of 1,3-bissilyl enol ethers with 1,1-diacylcyclopropanes

The Lewis acid mediated domino "[3+3]-cyclization-homo-Michael" reaction of 1,3-bissilyl enol ethers with 1,1-diacylcyclopropanes allows an efficient one-pot synthesis of functionalized salicylates containing a halogenated side chain. A great variety of substitution patterns could be realized by variation of the starting materials and of the Lewis acid. The mechanism of the domino process was studied.     

Variational spiked oscillator

A variational analysis of the spiked harmonic oscillator Hamiltonian –d ²/dr² +r ² +/r ^5/2,>0, is reported. A trial function automatically satisfying both the Dirichlet boundary condition at the origin and the boundary condition at infinity is introduced. The results are excellent for a very large range of values of the coupling parameter, suggesting that the present variational function is appropriate for the treatment of the spiked oscillator in all its regimes (strong, moderate, and weak interactions).     

Unsteady incompressible flow of magnetized aluminium oxide and titanium oxide nanoparticles with blood base fluid

In this investigation, a mixed convective nanoparticles fluid flow over an inclined plate is deliberated. The effects of slip boundary wall and magnetic field are also considered. The dimensionless governing system for the considered problem is attained by implementing recent definitions of fractional derivatives (FD). The generalized solution is obtained through the Laplace Transformation Scheme (LTS) for the momentum and thermal expressions. To improve the novelty and to demonstrate some more physical perception of the stated research work, some remarkable special cases of velocity distribution through CF and AB-fractional derivative concept are addressed, whose daily life implication is well known in the existing literature. Moreover, to evaluate the physical interest of the stated problem, the outcomes of the obtained system graphical illustrations are made by utilizing MATHEMATICA. As a result, we concluded that the aluminium oxide $A{l}_2{O}_3$ nanoparticles show more decaying behavior as compared to titanium oxide $Ti{O}_2$ nanoparticles for temperature and velocity profile. Furthermore, both fields i.e., momentum and thermal distributions are increased with the help of rising estimations parameter. Current results report novel applications in enhancement of heat transfer, thermal engineering, chemical processes, engineering and electronics devices, solar systems, extrusion processes, fission reactions etc.     

Hall effects and entropy generation applications for peristaltic flow of modified hybrid nanofluid with electroosmosis phenomenon

The electroosmotic peristaltic flow of modified hybrid nanofluid in presence of entropy generation has been presented in this thermal model. The Hall impact and thermal radiation with help of nonlinear relations has also been used to modify the analysis. The assumed flow is considered due to a non-uniform trapped channel. The properties of modified hybrid nanofluid model are focused with interaction of three distinct types of nanoparticles namely copper ($Cu)$, silver ($Ag$) and aluminum oxide ($A{l}_2{O}_3).$ The mathematical modeling and significances of entropy generation and Bejan number are identified. With certain flow assumptions, the governing equations are attained for optimized peristaltic electroosmotic problem. Widely used assumptions of long wave length and low Reynolds number reduced the governing equations in ordinary differential equations. The ND solver is flowed for the solution process. The physical significant of results is observed by assigning the numerical values to parameters.     

Differential pulse polarographic determination of trace selenium(IV) and molybdenum(VI) using the catalytic hydrogen wave

In the presence of selenium(IV) and molybdenum(VI) a new polarographic peak appears which corresponds to a hydrogen catalytic wave. By differential pulse polarography a single, sharp peak at about -1.1 V is obtained, allowing trace determination of selenium(IV) and molybdenum(VI) in the range 1x10(-6)-5.0x10(-9) M with a linear calibration and a detection limit of 1.5x10(-9) M. The optimum conditions are found to be 0.1 M KNO(3) and a pH of about 3.2 (Britton-Robinson buffer). There is no serious interference from some ions when present at 1.0-40 times that of molybdenum. At higher amounts of interfering ions the interference is eliminated by the addition of EDTA.     

Neutron induced radiography in the determination of boron in drinking water

Neutron induced radiography has been applied to the determination of boron concentrations in drinking water, collected from natural springs of Reshian and Muzaffarabad areas of Azad Kashmir, Pakistan, using CR-39 etched track detectors. The technique is based upon the simultaneous irradiation with thermal neutrons of a sample of unknown concentration and a standard of known boron concentration, fixed on a track detector. The subsequent counting of alpha and ⁷Li tracks in the detector resulting from the ¹⁰B(n,)⁷Li nuclear reaction is done after chemical etching. Boron concentration in the sample is determined by comparing ⁷Li and alpha-particle track density with that of a standard of known boron concentration. Boron concentrations in drinking water samples from Muzaffarabad and Reshian area of Azad Kashmir have been found to vary from (0.054±0.001) mg/l to (0.250±0.004) mg/l with an average of (0.16±0.002) mg/l. The observed concentration of boron in drinking water has been found to be less than the provisional Maximum Acceptable Concentration level (0.4 mg//l) of WHO. The drinking water from the reported area has been found to be within safe limits as far as boron related health hazards are concerned.This revised version was published online in November 2005 with corrections to the Cover Date.     

Synthesis of Starch-Grafted Polymethyl Methacrylate via Free Radical Polymerization Reaction and Its Application for the Uptake of Methylene Blue

In this research, a new biodegradable and eco-friendly adsorbent, starch-grafted polymethyl methacrylate (St-g-PMMA) was synthesized. The St-g-PMMA was synthesized by a free radical polymerization reaction in which methyl methacrylate (MMA) was grafted onto a starch polymer chain. The reaction was performed in water in the presence of a potassium persulfate (KPS) initiator. The structure and different properties of the St-g-PMMA was explored by FT-IR, 1H NMR, TGA, SEM and XRD. After characterization, the St-g-PMMA was used for the removal of MB dye. Different adsorption parameters, such as effect of adsorbent dose, effect of pH, effect of initial concentration of dye solution, effect of contact time and comparative adsorption study were investigated. The St-g-PMMA showed a maximum removal percentage (R%) of 97% towards MB. The other parameters, such as the isothermal and kinetic models, were fitted to the experimental data. The results showed that the Langmuir adsorption and pseudo second order kinetic models were best fitted to experimental data with a regression coefficient of R² = 0.93 and 0.99, respectively.