Synchronous Full-Scan for Asynchronous Handshake Circuits

Handshake circuits form a special class of asynchronous circuits that has enabled the industrial exploitation of the asynchronous potential such as low power, low electromagnetic emission, and increased cryptographic security. In this paper we present a test solution for handshake circuits that brings synchronous test-quality to asynchronous circuits. We add a synchronous mode of operation to handshake circuits that allows full controllability and observability during test. This technique is demonstrated on some industrial examples and gives over 99% stuck-at fault coverage, using test-pattern generators developed for synchronous circuits. The paper describes how such a full-scan mode can be achieved, including an approach to minimize the number of dummy latches in case latches are used in the data path of the handshake circuit.     

Heterogeneous photobleaching in confocal microscopy

Photobleaching was studied during recording of confocal scanning laser microscopy. Studies on fluorescent gels of FITC-labeled dextran were used to evaluate differential bleaching along thez-axis. Differential bleaching along the z-axis was observed and it was seen that this was related to the numerical aperture of the objective in use. This points to the conclusion that photon energy flux density is an important parameter in photobleaching. To check if photon energy flux density heterogeneity is affected by local variation in the refractive index of the sample, photobleaching rates were calculated for different fluorescent objects (sections of seeds, animal cells stained with nuclear stains, immunocytochemistry preparations) and a pronounced similarity was found between photobleaching rates and DIC images.     

Failure criteria of flip chip joints during accelerated testing

The criteria used to determine electrical failure was explored during accelerated testing of underfilled flip chip joints as a function of both different thermal cycling conditions and different sampling methods. The criteria was based on resistance measurements of daisy-chained solder joints monitored in situ and by endpointing. The sensitivity of the resistance criteria was found to depend strongly on test conditions and often could not be categorized into simple pass/fail groupings. Also, extremely small resistance changes were measured for joints with through-cracks generated by fatigue. Experimental error associated with fixing the cycles to failure was minimized by monitoring the absolute changes in resistance as a function of cycling time while simultaneously measuring the temperature dependence of resistance as the joints degrade. Failure times derived from interval part monitoring closely approximated in situ monitoring, but the resistance measurements for mild cycling conditions required a high degree of accuracy. Finally, a tunneling model is proposed to explain the resistance behavior of cracked joints.     

Yellow‐light‐emitting cyano‐substituted poly[(1,3‐phenylene vinylene)‐alt‐(1,4‐phenylene vinylene)] derivative: Its synthesis and optical properties

A soluble cyano‐substituted poly[(1,3‐phenylene vinylene)‐alt‐(1,4‐phenylene vinylene)] derivative ( 9 ) was synthesized and characterized. Comparison between 9 and its model compound ( 10 ) showed that the chromophore in 9 remained to be well defined as a result of a π‐conjugation interruption at adjacent m‐phenylene units. The attachment of a cyano substituent only at the β position of the vinylene allowed the maximum electronic impact of the cyano group on the optical properties of the poly(p‐phenylene vinylene) material. At a low temperature (?108 or ?198 °C), the vibronic structures of 9 and 10 were partially resolved. The absorption and emission spectra of a film of 9 were less temperature‐dependent than those of a film of 10 , indicating that the former had a lower tendency to aggregate. A light‐emitting diode (LED) based on 9 emitted yellow light (λ_max ≈ 578 nm) with an external quantum efficiency of 0.03%. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3149–3158, 2003     

Surface polarity of cellulose derivates observed by coumarin 151 and 153 as solvatochromic and fluorochromic probes

Solvent‐dependent ultraviolet–visible (UV–vis) absorption and Stokes shifts including strong hydrogen‐bond‐donating (HBD) solvents such as 2,2,2‐trifluoroethanol and 1,1,1,3,3,3‐hexafluoro‐2‐propanol of two coumarine dyes (Co 151 and Co 153) were analyzed with multiple‐square analyses of linear solvation energy relationships and the Kamlet–Taft solvent parameter set to α (HBD capacity), β (hydrogen‐bond‐accepting capacity), and π* (dipolarity/polarizability). The UV–vis absorption and emission spectra of Co 151 and Co 153 were measured when adsorbed on various polysaccharides such as different cellulose batches, carboxymethylcelluloses with different degrees of substitution, and chitine. As a result of this evaluation, Co 153 is recommended as an alternative UV–vis probe for evaluating the dipolarity/polarizability of cellulose and cellulose derivates. Multiple adsorption of Co 153 on Linters cellulose took place indicating a wide‐surface polarity distribution, which makes the determination of a rigid polarity parameter questionable. Thus, fluorescence measurements of adsorbed Co 153 are suitable to detect inhomogenities on a surface but not for the determination of empirical polarity parameters. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1210–1218, 2003     

Minimal, rigid foliations by curves on ℂℙ n

We prove the existence of minimal and rigid singular holomorphic foliations by curves on the projective space ℂℙ ⁿ for every dimension n≥2 and every degree d≥2. Precisely, we construct a foliation ℱ which is induced by a homogeneous vector field of degree d, has a finite singular set and all the regular leaves are dense in the whole of ℂℙ ⁿ . Moreover, ℱ satisfies many additional properties expected from chaotic dynamics and is rigid in the following sense: if ℱ is conjugate to another holomorphic foliation by a homeomorphism sufficiently close to the identity, then these foliations are also conjugate by a projective transformation. Finally, all these properties are persistent for small perturbations of ℱ.?This is done by considering pseudo-groups generated on the unit ball 𝔹 ⁿ ⊆ℂ ⁿ by small perturbations of elements in Diff(ℂ ⁿ ,0). Under open conditions on the generators, we prove the existence of many pseudo-flows in their closure (for the C ⁰-topology) acting transitively on the ball. Dynamical features as minimality, ergodicity, positive entropy and rigidity may easily be derived from this approach. Finally, some of these pseudo-groups are realized in the transverse dynamics of polynomial vector fields in ℂℙ ⁿ . Received March 7, 2002 / final version received November 26, 2002?Published online February 7, 2003 Most of this work has been carried out during a visit of the first author to IMPA/RJ and a visit of the second author to the University of Lille 1. We would like to thank these institutes for hospitality and express our gratitude to CNPq-Brazil and CNRS-France for the financial support which made these visits possible. We are also indebted to Paulo Sad, Marcel Nicolau and the referee whose comments helped us to improve on the preliminary version. Finally, the second author has partially conducted this research for the Clay Mathematics Institute.     

Research problems

This section appears from time to time. Contributions are invited, and should be submitted to R. C. Thompson, Mathematics Department, University of California, Santa Barbara, CA 93106.     

Optimizing Router Performance in TCP/IP Networks

This article reviews the steps necessary to configure and implement a complex router internetwork. This article will specifically concentrate on Cisco routers, and since they support Transmission Control Protocol/Internet Protocol (TCP/IP) natively, it will concentrate on a backbone network employing that protocol.     

Extending the Kernighan/Lin Heuristic for Hardware and Software Functional Partitioning

The Kernighan/Lin graph partitioning heuristic, also known as min-cut or group migration, has been extended over several decades very successfully for circuit partitioning. Those extensions customized the heuristic and its associated data structure to rapidly compute the minimum-cut metric central to circuit partitioning; as such, those extensions are not directly applicable to other problems. In this paper, we extend the heuristic for functional partitioning, which in turn can solve the much investigated codesign problem of partitioning a system's coarse-grained functions among hardware and software components. The key extension customizes the heuristic and data structure to rapidly compute execution-time and communication metrics, crucial to hardware and software partitioning, and leads to near-linear time-complexity and excellent resulting quality. Another extension uses a new criteria for terminating the heuristic, eliminating time-consuming and unnecessary fine-tuning of a partition. Our experiments demonstrate extremely fast execution times (just a few seconds) with results matched only by the slower simulated annealing heuristic, meaning that the extended Kernighan/Lin heuristic will likely prove hard to beat for hardware and software functional partitioning.     

Metallothionein as a biomarker for mercury in tissues of rat fed orally with cinnabar

Cinnabar, as one of the most widely used mineral drugs in traditional Chinese medicines, has been proven to have prominent curative effects in clinical use for more than 2000 years. But the safety and toxicity of the drug has been under constant debate in clinic usage. Metallothionein (MT) contains about 30% of cysteine in the molecule, and plays an important detoxification role against heavy metals. In this study, it was used as a biomarker to assess mercurial accumulation in rats fed orally with cinnabar. After feeding rats with cinnabar by gastric gavage at different dosages and at different times, the distribution of heavy metals (including mercury, copper and zinc) and MT was investigated among rat tissues, including liver, kidney, heart, brain, testis and blood. Metals and MT determinations were carried out using inductively coupled plasma mass spectrometry (ICP‐MS) and a modified mercury saturation assay technique respectively. The results indicated that mercury was easily accumulated in the tissues of rats exposed to cinnabar, especially in kidney. For example: at a feeding dosage of 5 g kg^?1 (bw) for 4 weeks, the mercury concentrations in kidney were 13, 8.7, 21.6 and 26 times those in liver, testis, brain and heart respectively; and at 2.5 g kg^?1 (bw) for 2 weeks, the mercury concentrations in kidney were 21, 2.1, 3 and 21 times those in liver, testis, brain and heart respectively. In addition, mercury in kidney and liver of all cinnabar groups was significantly higher than that of the control group (P < 0.01). A high positive correlation observed between MT concentrations and mercury levels in both liver and kidney (R² = 0.9299, P < 0.02 for liver; R² = 0.9923, P < 0.0008 for kidney) indicated that MT could be used as a biomarker for mercury in tissues. Copyright © 2004 John Wiley & Sons, Ltd.