Matrix unit cell scheduler (MUCS) for input-buffered ATM switches

This paper presents a novel matrix unit cell scheduler (MUCS) for input-buffered asynchronous transfer mode (ATM) switches. The MUCS concept originates from a heuristic strategy that leads to an optimal solution for cell scheduling. Numerical analysis indicates that input-buffered ATM switches scheduled by MUCS can utilize nearly 100% of the available link bandwidth. A transistor-level MUCS circuit has been designed and verified using HSPICE. The circuit features a regular structure, minimal interconnects, and a low transistor count. HSPICE simulation indicates that using 2-μm CMOS technology, the MUCS circuit can operate at clock frequency of 100 MHz     

Some spectrofluorimetric applications of the cerium(IV)-cerium(III) system

Cerium(III) ions in dilute sulphuric acid medium exhibit a characteristic fluorescence which has its excitation maximum at 260 nm and its fluorescence emission maximum at 350 nm. By utilising the osmium-catalysed redox reaction between cerium(IV) and arsenic(III), microgram amounts of arsenic (7.5–37.5 μg) may be determined by spectrofluorimetric measurement of the ceriurm(III) produced. The principle may be applied to the determination of several other ions which cannot yet be determined by direct spectrofluorimetry, e.g.. Fe(II) (5.6–28 μg), oxalate (8.8–44μg). Osmium(VIII) (0.05–0.2 μg) and iodide (0.6–2.5 μg) may be determined by their catalytic action.     

SEARCH THEORY IN NATURAL RESOURCE MODELING

The role of search theory in the exploitation of natural resources is discussed in this paper. After a brief history and taxonomy of search problems, the mathematics of search is discussed. This includes underlying probability distributions, the differential equations of search, Bayesian use of search information and optimization problems in search theory. The theory is illustrated by applications in fisheries, pest control, animal foraging, and oil and mineral exploration.     

Organosilicon compounds : LI. Further studies of the base-catalysed solvolysis of N-(triorganosilyl)anilines

Relative rates of solvolysis of some N-triorganosilylanilines in mixtures of ethanol and aqueous potassium hydroxide have been determined, with results as follows. (i) For XC₆H₄NHSiEt₃ compounds in MeOH (5 vol) + aq. alkali (2 vol) at 50°: (X =) H, 1.0;p-Me, 0.80;p-OMe, 0.83;m-Me, 0.90; o-Me, 0.87; p-SMe, 1.90; p-F, 1.7; p-Cl, 2.8; o-Cl, 14; m-Cl, 4.2; m-NO₂, 18; p-CN, ca. 43; p-NO₂, ca. 120. (ii) For PhNHSi(C₆H₄Y)₃ compounds in MeOH (10 vol) + aq. alkali (1 vol) at 50°: (Y =) H, 1.0; p-OMe, 0.12; p-Cl, ca. 32; m-Cl, ca. 84. (iii) For PhNHSiR₃ compounds in MeOH (5 vol) + aq. alkali (2 vol) : (R₃ =) Et₃, 1.0; Et₂Me, 18 (at 30°); Me₂-i-Pr, 8 (at 30°);Me₂-t-Bu, 0.012 (at 50°);i-Pr₃, 0.006 (at 50°). In series (i) the relative rates correlate with σ, or where appropriate σ^?-constants, with a ? value of 1.6. It is suggested that in the transition state of the rate-determining step the OSi bond is fully formed, or almost so, the SiN bond approximately 20—50% broken, and the bond between the nitrogen atom and a proton from the solvent ca. 10—30% formed.     

A simplified synthesis of the hexamethylplatinate(IV) ion

Tetra-n-butylammonium hexachloroplatinate (IV) reacts with lithium methyl/lithium iodide in ether to give a solution containing lithium hexamethylplatinate (IV). With lithium methyl/lithium bromide in ether however, tetrabutylammonium hexamethylplatinate (IV) is precipitated together with lithium halides. Solid [Bu₄N)₂[Pt(Ch₃)₆] is stable under nitrogen at room temperature, but ether solutions of [Pt(Ch₃)₆]^2- decompose in a few minutes at room temperature in the absence of excess lithium methyl.     

Figures of merit of pneumatic and ultrasonic sample introduction systems in inductively coupled plasma–multichannel-based emission spectrometry in an ultra-clean environment

Conventional figures of merit such as limits of detection, signal to background ratio or repeatability, are used to determine the performance of pneumatic and ultrasonic sample introduction systems in an ultra-clean environment with an axially viewed inductively coupled plasma-atomic emission spectrometry and multichannel detection. We observed that the ultrasonic nebuliser offered a large improvement of signal intensity (10-133 greater) compared to a cyclone chamber coupled with a pneumatic Meinhard nebuliser. This improvement is associated with an average increase of signal to background ratio by a factor 86 and an average decrease of detection limits by a factor 6. The improvement factors generally depend on the element and for the same element on spectral lines. Typically, the observed values of detection limits in this work are lower than those published and obtained in non-ultra-clean conditions. The results emphasize that the environmental conditions of cleaning and analysis are essential to avoid and control cross contamination of the samples and hence to obtain low detection limits.     

Rates of base-catalysed cleavage of pyridyl-, quinolyl-, picolyl- and (quinolylmethyl)-trimethylsilanes

Rates of cleavage of some picoyl- and (quinolylmethyl)-trimethylsilanes (RSiMe₃, where R = PyCH₂ or QnCH₂SiMe₃) have been measured in “90%” aqueous methanolic sodium methoxide at 50°C. Relative reactivities are: 2-PyCH₂, 1.0; 3-PyCH₂, 0.030; 4-PyCH₂, 8.9; 2-QnCH₂, 41; 3-QnCH₂, 0.161; 4-QnCH₂, 37. The rates correlate well with those for base-catalysed hydrogen-exchange in the parent carbon acids RH. Approximate pK_a's (based on the scale of ion-pair acidities in CsNHC₆H₁₁H₂NC₆H₁₁, with pK_a of 9-phenylfluorene = 18.6) for the carbon acids, RH, can be derived as follows: 2-PyCH₃, 29.5; 3-PyCH₃, 34; 4-PyCH₃, 27; 2-QnCH₃, 25; 3-QnCH₃, 32; 4-QnCH₃, 25.Rates of cleavage of pyridyl- and quinolyl-trimethylsilanes (PySiMe₃ and QnSiMe₃) by sodium hydroxide in 4 : 1 v/v Me₂SO/H₂O at 50°C have also been measured; and the relative reactivities are: 2-Py, 1.0; 3-Py, 2.9; 4-Py, 8.4; 2-Qn, 15.9; 3-Qn, 12.7; 4-Qn, 184. The sequence of reactivity differes from that for base-catalysed hydrogen-exchange at the relevant positions of pyridine and quinoline, indicating that the reactivities are not determined in both cases (if in either) solely by the stabilities of the corresponding carbanions.     

The Dyeing of Nylon and Cotton Cloth with Azo Dyes: Kinetics and Mechanism

The mechanism of the dyeing of cotton and nylon cloth by the azo dyes Orange G and Sunset Yellow FCF was investigated using a channel flow cell. The variation in dyeing with flow rate was found to proceed via a mechanism in which the flux of dye entering the cloth relative to the flux of dye to the cloth surfacedecreasedwith increasing flow rate. A mechanism is deduced in which the dye passes from bulk solution, through a porous surface layer within the cloth, before passing into the bulk cloth. Adsorption onto surface sites in this porous layer blocks the passage of further dye into the cloth. Kinetic parameters for such a mechanism are given.     

Rearrangement during cyclisation of some 3-(2-pyrrolyl) propionic acids and related compounds

Cyclisation of the title compounds leads to mixtures of the expected 4H-cyclopental[b]pyrrol-4-ones (1), the corresponding 6-ones (3) by a single rearrangement, and the cyclopenta[c]pyrrol-4-ones (4) by a double rearrangement, the proportions depending upon the substituents.The ¹H NMR spectra of 2-methyl-4H-cyctopenta[b]thiophen-6-one (3f) shows 6J long range $\text{CH}{}_3\text{CH}{}_2$ coupling, but this is absent in the corresponding pyrroles (3c,d). The ¹³C spectra of 1 and 3 cannot be interpreted on the basis of substituent chemical shifts in pyrroles and thiophens, and are clearly -CH = CH-X (X = NMe, NPh, S) bridged derivatives of cyclopent-2-enone.