Grouped Approach for the Design of H.264/AVC Motion Estimation Architectures

This letter presents a novel approach for organizing computational resources into groups within H.264/AVC motion estimation architectures, leading to reductions of up to 75% in the equivalent gate count with respect to state‐of‐the‐art designs.     

Combined supercritical-fluid chromatography/mass spectrometry in the analysis of diuron in plasma using on-line phase-system switching

On-line sample pretreatment by means of the phase-system switching approach is an interesting technique for the analysis of aqueous samples, e.g., plasma, by means of supercritical-fluid chromatography. In order to analyse plasma samples the following analytical procedure is used. The plasma sample is injected on to a short precolumn, which is washed with water and subsequently dried with nitrogen. Next, the solutes are desorbed with the supercritical mobile phase, analysed with packed-column supercritical-fluid chromatography and detected with either a UV detector or a mass spectrometer, equipped with a moving-belt interface. The herbicide diuron is selected as a test compound to study the feasibility of this approach. Using a selective detector the procedure is sufficiently sensitive to detect diuron in plasma, but not appropriate to detect the diuron metabolites in a post-mortem plasma sample. These have been identified with liquid chromatography/mass spectrometry. The detection limit of diuron in plasma using the procedure described is about 30 ng/mL.     

Gyrotron coaxial cylindrical resonators with corrugated innerconductor: Theory and experiment

Gyrotron coaxial resonators with a longitudinally slotted inner cylinder are examined analytically using a surface impedance model, from which expressions for the electromagnetic field, ohmic quality (Q) factor, and characteristic equation of the transverse eigenvalues χ _m,p are obtained. The major attributes of such resonators are expressed by the dependence of χ_m,p on the parameter C-defined as the ratio of the outer to inner radii of the coaxial structure. In that connection, the effect of the corrugation parameters on χ_m,p is particularly investigated on the basis of an expression derived for the slope function dχ_m,p,p/dC. It is shown that the χ_m,p(C) curve may either exhibit oscillatory behavior or present a flat portion over a wide range of C depending on the corrugation parameters chosen. The theory is checked against experiment in which resonant frequencies and total Q factors were measured for TE modes operating in the range of 8-16 GHz in a coaxial cavity with 40 slots. Good agreement is found in that the magnitude of the relative error in frequency is less than 0.5%. Corrugated coaxial resonators prove to be relevant to megawatt gyrotrons where highly selective cavities are required to ensure high conversion efficiency     

Large-bandwidth frequency conversion in high-NA step index opticalfibers

Using high-NA step index optical fibers, we show, theoretically, that large-bandwidth second-harmonic generation and sum frequency generation can be achieved at conversion frequencies in the visible region of the spectrum     

Diblock copolymers based on allyl methacrylate: Synthesis,characterization, and chemical modification

Different diblock copolymers constituted by one segment of a monomer supporting a reactive functional group, like allyl methacrylate (AMA), were synthesized by atom transfer radical polymerization (ATRP). Bromo‐terminated polymers, like polystyrene (PS), poly(methyl methacrylate) (PMMA), and poly(butyl acrylate) (PBA) were employed as macroinitiators to form the other blocks. Copolymerizations were carried out using copper chloride with N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as the catalyst system in benzonitrile solution at 70 °C. At the early stage, the ATRP copolymerizations yielded well‐defined linear block copolymers. However, with the polymerization progress a change in the macromolecular architecture takes place due to the secondary reactions caused by the allylic groups, passing to a branched and/or star‐shaped structure until finally yielding gel at monomer conversion around 40% or higher. The block copolymers were characterized by means of size exclusion chromatography (SEC), ¹H NMR spectroscopy, and differential scanning calorimetry (DSC). In addition, one of these copolymers, specifically P(BA‐b‐AMA), was satisfactorily modified through osmylation reaction to obtain the subsequent amphiphilic diblock copolymer of P(BA‐b‐DHPMA), where DHPMA is 2,3‐dihydroxypropyl methacrylate; demonstrating the feasibility of side‐chain modification of the functional obtained copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3538–3549, 2007     

DefibViz: A Visualization Tool for the Assessment of Electrode Parameters on Transthoracic Defibrillation Thresholds

DefibViz is a software application developed for defibrillation simulation and visualization. It exploits both surface techniques and methods for the interactive exploration of volumetric datasets for the analysis of transthoracic defibrillation simulation results. DefibViz has a graphical user interface for the specification of the shape, size, position, and applied voltage of a defibrillator's electrodes. An option is provided for using 3D slice plane widgets, which operate on the volumetric datasets, such that the distribution of the voltage gradient induced by an electric shock can be visually inspected in various tissues throughout the myocardium and torso. One goal of DefibViz is to enhance understanding of how electrode parameters relate to the change of the voltage gradient distribution throughout the heart, which may help lead to optimal defibrillator design. DefibViz is significant, in that, it is built by using an open-source graphics and visualization framework providing a platform for subsequent modifiability and extensibility. Moreover, it integrates simulation and visualization techniques, which previously required the running of several independent software executables, into an enhanced, seamless, and comprehensive software application.     

Constructing candidate word lists using acoustically similar wordgroups

A method for identifying a set of candidate words that matches well with a given utterance is discussed. The method uses precomputed groups of acoustically similar words. Given a vocabulary, for each word a short list of words that are acoustically similar to it is computed. These groups are constructed using training utterances recorded by several speakers and used in an isolated utterance recognition system to construct candidate word lists during recognition. Experiments show that the correct word appears on the short list of candidate words constructed during recognition using this scheme over 98% of the time