A 16-Mbit/s adapter chip for the IBM token-ring local area network

The authors describe a 9.02×9.02-mm chip built in 1-μm CMOS with two levels of metal and an additional mask level for fabricating capacitors. It contains both analog and digital circuits and has provisions for self-test. The function includes the transmitter, receiver, protocol handler, an microprocessor, as well as interfaces for RAM/ROM storage, IBM PC bus, IBM PS/2 bus, IBM 3174 bus, and Motorola 68000 bus. The physical design terrains are formed by 24K circuits of standard cell gates, a 10K-circuit equivalent hand-honed custom microprocessor, and an analog macro. The chip operates from a single 5-V supply, and the power consumption is 0.8 W nominal at 16 Mb/s. The chip can also be operated at 4 Mb/s     

Comment on new differential flip-flops from Yuan and Svensson

A family of differential latches has recently been proposed by Yuan and Svensson [1996]. The author shows that the proposed flip-flops using the dynamic slave latch suffer from a poor logic-level zero in the presence of glitches on the data inputs     

Post-source decay in the analysis of polystyrene by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Various secondary series are observed in matrix-assisted laser desorption/ionization (MALDI) time-of-flight mass spectra of polystyrene. The number and positions of the series depend on the choice of matrix and added cation. For a given treatment, series observed in linear mode are not necessarily observed in reflectron mode, and vice versa. Post-source decay analysis was used to determine that the secondary series arise at least in part from formation and decay of adducts of polystyrene with matrix species. There is some treatment-to-treatment variation, but adduct formation and decay were observed for all tested treatments. The multiplicity of secondary series makes it unclear whether post-source decay occurs for the main series (polystyrene + cation)⁺ ions under the conditions normally used for polystyrene analysis. Such ions do undergo post-source decay at laser fluences greater than normally used. Although only polystyrene was investigated in this work, other polymers may also produce adduct and decay series in MALDI analysis. Their presence can mask the presence of minor components in a sample, but at least as observed here, do not have a strong influence on molecular mass determinations.     

Developments in microscale and nanoscale sensors for biomedical sensing

The widespread use of point of care testing in biomedical and clinical applications is a major aim of the electrochemical field. A large number of groups are working on lab-on-a-chip systems or sensor arrays which are underpinned by electrochemical detection methodologies. Miniaturized transducers have the potential to be adopted in such systems for diagnosis of a range of diseases in both clinical and nonclinical settings. In this review, we will present the current trends and state of the art for a selection of miniaturized sensing elements (microelectrodes, nanoelectrodes, and field-effect transistors) and provide an impression of current technologies, their associated performance characteristics, and also considering the major barriers to adoption and how they might be surmounted in future so these technologies can fulfil their early promise.     

Cycles in dense digraphs

Let G be a digraph (without parallel edges) such that every directed cycle has length at least four; let β(G) denote the size of the smallest subset X ? E(G) such that G?X has no directed cycles, and let γ(G) be the number of unordered pairs {u, v} of vertices such that u, v are nonadjacent in G. It is easy to see that if γ(G) = 0 then β(G) = 0; what can we say about β(G) if γ(G) is bounded?

We prove that in general β(G) ≤ γ(G). We conjecture that in fact β(G) ≤ ½γ(G) (this would be best possible if true), and prove this conjecture in two special cases:

• when V(G) is the union of two cliques
• when the vertices of G can be arranged in a circle such that if distinct u, v, w are in clockwise order and uw is a (directed) edge, then so are both uv, vw.

     

Determination of binding selectivities in host-guest complexation by electrospray/quadrupole ion trap mass spectrometry

The quantifiable relationship between the equilibrium solution composition and electrospray (ESI) mass spectral peak intensities of simple host-guest complexes was investigated. Specifically, host-guest complexes of simple crown ethers or glymes with alkali metals and ammonium ions were studied. Comparisons were made between the theoretical concentrations of host-guest complexes derived in solution from known stability constants and the peak intensities for the complexes observed by ESI mass spectrometry (ESI-MS). Two types of complexation experiments were undertaken. First, complexation of a single guest ion, such as an alkali metal, and two crown ethers was studied to evaluate the determination of binding selectivities. Second, complexation of two different guest ions by a single polyether host was also examined. In general, solvation was found to play an integral part in the ability to quantify binding selectivities by ESI-MS. The more similar the solvation energies of the two complexes in the mixture, the more quantifiable their binding selectivities by ESI-MS. In some cases, excellent correlation was obtained between the theoretically predicted selectivity ratios and the ESI mass spectral ratios, in particular when the ESI ratios were adjusted based on evaluation of ESI response factors for the various host-guest complexes.