A modular approach for probe-fed and capacitively coupledmultilayered patch arrays

We present a modular technique for analyzing probe-fed, multilayered microstrip phased-array antennas. Each patch layer is assumed to be infinite in extent and represented by its generalized scattering matrix (GSM) with respect to a finite number of Floquet modes. For multilayer patch analysis, the individual GSMs are combined appropriately to yield the overall GSM of the structure. The individual GSM are obtained using the Galerkin method. The probe layer is represented by its generalized impedance matrix (GIM) which is deduced using Floquet modal analysis and the variational method. The GSMs and GIM are combined appropriately to yield the input impedance seen by the probe. Numerical results computed with this technique are shown to agree favorably with available data. Results for two-layered patch arrays and capacitively coupled patches are also presented     

The spectrophotometry and solvent-extraction behaviour of iron(III), vanadium(IV and V) and titanium(IV) chelates of 1-(o-carboxyphenyl)-3-hydroxy-3-methyltriazene

l-(o-Carboxyphenyl)-3-hydroxy-3-methyltriazene is proposed as an excellent reagent for the spectrophotometric determination of iron(III) and titanium(IV), and also for the separation of titanium from a large quantity of iron as well as other cations and anions. Iron(III) forms an anionic violet 1:2 complex at pH 4.0–9.4, and a cationic green 1:1 complex at pH 1.5–2.0, with absorption maxima at 570 nm and 660 nm, respectively. The violet complex is quantitatively extracted in chloroform containing n-octylamine at pH 3.0–9.0. The green and the violet iron(III) complexes obey Beer's law, the respective optimal ranges being 8.9–35.8 and 3.9–11.2 p.p.m. The yellow titanium chelate extracted into chloroform (absorption maximum at 410 nm) between pH 1.0 and 3.5, can be re-extracted into concentrated sulphuric acid a violet colour being produced with absorption maximum at 530 nm. Beer's law is obeyed in the ranges 0.8–5.7 p.p.m. for the titanium complex in chloroform and 3.4–19.2 p.p.m. when extracted in concentrated sulphuric acid. Interferences from diverse ions are not severe. Procedures for the separation and determination of titanium in the presence of a large quantity of iron are given. The isolation of the iron(III) and vanadium(IV and V) complexes, and their properties, are described.     

Separation of molybdenum from tungsten with di(2-ethylhexyl)-phosphoric acid ac extractant

The use of di(2-ethylhexyl)phosphoric acid (HDEHP) as an extractant for the separation of molybdenum from tungsten was examined with the help of molybdenum-99 and tungsten-187 as radiotracers. Effective separation was obtained when the aqueous phase contained phosphoric acid at pH 0.8–2 or pH 3–3.5, depending on the amounts of metal. The method is applicable to both tracer and milligram amounts of molybdenum. The structure of the extracted species was examined by infrared spectroscopy.     

Adsorption of tracer cations,and the separation of carrier-free95Nb from95Zr,XU1 from U and45Ca from46Sc on titanium phosphate column

Titanium phosphate as ion exchanger for column operation has been prepared by mixing TiCl₄ and H₃PO₄ in suitable proportion. The ratio of titanium: phosphate was obtained to be 1:2.02. The uptake of Na⁺, K⁺, Rb⁺, Cs⁺, Ag⁺, Ca²⁺, Sr²⁺, Ba²⁺, Pb²⁺, Sc³⁺, Co³⁺, Y³⁺, Tb³⁺, Zr⁴⁺ and Th⁴⁺ cations at very small concentrations has been studied on this exchanger. The data indicated that the different cations are adsorbed in the exchanger by different mechanisms. Radiochemical separations of carrier free⁹⁵Nb from⁹⁵Zr, UX₁ from U and⁴⁵Ca from⁴⁶Sc have been achieved by adopting very simple chemical procedures through a column of titanium phosphate. The -spectrum of the separated⁹⁵Nb, UX₁ and⁴⁶Sc showed that the products are of high radionuclidic purity. The individual separation procedures took less than 20 min and the yields are quantitative.     

Absorption and fluorescence behavior of cytosine irradiated at different pH and in the presence of Cu(II) ions at neutral pH

Dilute aqueous solutions of cytosine were irradiated with⁶⁰Co -rays under N₂O saturated conditions at different pH and in the presence of Cu(II) ions at neutral pH. The base degradation decreased from neutral to acidic and basic conditions. In the presence of metal ions at neutral pH conditions there was a significant increase in the base degradation compared to that in the absence of metal ions under similar conditions. From the difference absorption spectra and fluorescence behavior of the irradiated solutions it was observed that the major radiolytic products of cytosine under different conditions are cytosine glycols, 5-hydroxycytosine, hydroxy-hydrocytosine and cytosine dimers. The yields of dimers is maximum in neutral conditions and it decreased from basic to acidic conditions. However, in the presence of Cu(II) ions formation of cytosine dimers is completely restricted and there is an increase in the yields of cytosine glycol, hydroxy-hydrocytosine and 5-hydroxycytosine. From the post-radiolytic changes in absorption and fluorescence behavior of irradiated solutions, it is revealed that some of the radiolytic products, namely cytosine glycol and hydroxy-hydrocytosine decompose to 5-hydroxycytosine and cytosine, respectively.     

Determination of gold by neutron activation analysis in some selected rocks and plants and its bearing on the genesis of auriferous quartz veins in Singhbhum district,Bihar, Eastern India

Present investigation deals with neutron activation analysis of gold in some varieties of geological samples related to auriferous quartz veins. A few plant specimens of the area were also analyzed. The gold contents in the rock samples as determined by the destructive way of analysis vary in the range 10⁻⁵ to 10⁻⁷%. In case of plant samples, however, the non-destructive method of analysis of the plant ashes was followed and the concentration of gold was found to be of the order of 10⁻⁵%. In plants, besides gold, some associated elements, such as La, Ce, Sm, Lu, Zr, Hf, Se, W, As and Sb were also identified.     

Low temperature thermal conductivity and specific heat of elastomers

The specific heat C and thermal conductivity κ of polybutadiene are characteristic of all non-crystalline materials at temperatures below ≈ K, reflecting the presence of localized excitations. The changes in C and κ with variation in crosslinking suggest that the relaxation times of the localized excitations may vary with crosslink density. Extension of an elastomer does not reveal a change in density of localized excitations as monitored by measuring κ, possibly because other phonon scattering mechanisms mask the effect. For T ? 10 K the phonon mean-free-path is independent of the microscopic anisotropy of the elastomer.     

Overview of the MPEG Reconfigurable Video Coding Framework

Video coding technology in the last 20 years has evolved producing a variety of different and complex algorithms and coding standards. So far the specification of such standards, and of the algorithms that build them, has been done case by case providing monolithic textual and reference software specifications in different forms and programming languages. However, very little attention has been given to provide a specification formalism that explicitly presents common components between standards, and the incremental modifications of such monolithic standards. The MPEG Reconfigurable Video Coding (RVC) framework is a new ISO standard currently under its final stage of standardization, aiming at providing video codec specifications at the level of library components instead of monolithic algorithms. The new concept is to be able to specify a decoder of an existing standard or a completely new configuration that may better satisfy application-specific constraints by selecting standard components from a library of standard coding algorithms. The possibility of dynamic configuration and reconfiguration of codecs also requires new methodologies and new tools for describing the new bitstream syntaxes and the parsers of such new codecs. The RVC framework is based on the usage of a new actor/ dataflow oriented language called CAL for the specification of the standard library and instantiation of the RVC decoder model. This language has been specifically designed for modeling complex signal processing systems. CAL dataflow models expose the intrinsic concurrency of the algorithms by employing the notions of actor programming and dataflow. The paper gives an overview of the concepts and technologies building the standard RVC framework and the non standard tools supporting the RVC model from the instantiation and simulation of the CAL model to software and/or hardware code synthesis.     

Mössbauer Studies of Nanosize CuFe2O4 Particles

⁵⁷Fe Mössbauer spectra of pulsed-laser deposited (PLD) films of CoFe₂O₄ of 0.3 µm thickness is investigated using transmission geometry is reported. Mössbauer parameters were determined for the tetrahedral (A) and octahedral (B) sites. The PLD processed films gave measurable spectra with no visible evidence of clustering or multiple phases present. Results on the films agreed with those of the bulk material. The films exhibited magnetic hyperfine and quadruple splittings similar to that of bulk CoFe₂O₄. This work demonstrates that measurable transmission Mössbauer spectra may be obtained for PLD deposited CoFe₂O₄ thick films.     

Entry distribution, fission barrier, and formation mechanism of 254102No

The entry distribution in angular momentum and excitation energy for the formation of 254No has been measured after the 208Pb(48Ca,2n) reaction at 215 and 219 MeV. This nucleus is populated up to spin 22Planck's over 2pi and excitation energy greater, similar6 MeV above the yrast line, with the half-maximum points of the energy distributions at approximately 5 MeV for spins between 12Planck's over 2pi and 22Planck's over 2pi. This suggests that the fission barrier is greater, similar5 MeV and that the shell-correction energy persists to high spin.